[Beitrag zu einem Tagungsband]
Optisches System mit individueller Strahlmanipulation von bis zu 64 Teilstrahlen für die UKP Multistrahl-Lasermaterialbearbeitung
In: 120. Jahrestagung vom 11. bis 15. Juni 2019 in Darmstadt, 2 Seiten, 2019

Hesker, Mario
Stollenwerk, Jochen Hugo
Loosen, Peter

[Beitrag zu einem Tagungsband]
Konzept zur Nutzung von Digitalisierung und Vernetzung beim Design, Aufbau und Betrieb optischer Systeme
In: [120. Jahrestagung der Deutschen Gesellschaft für angewandte Optik e.V., DGaO 2019, 2019-06-11 - 2019-06-15, Darmstadt, Germany], 2019

Prochnau, Marcel Sebastian
König, Hans-Georg
Scheres, Sven
Zerbes, Felix
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Industrial photoresist development with the EUV laboratory exposure tool : mask fabrication, sensitivity and contrast
In: International Conference on Extreme Ultraviolet Lithography 2019 / Editor(s): Toshiro Itani, Paolo A. Gargini, Patrick P. Naulleau, Kurt G. Ronse, 9 Seiten, 2019
[DOI: 10.1117/12.2536794]

Brose, Sascha
Danylyuk, Serhiy
Grüneberger, Franziska
Gerngroß, Maik
Stollenwerk, Jochen Hugo
et al.

[Fachzeitschriftenartikel]
Oxygen gain and aluminum loss during laser metal deposition of intermetallic TiAl
In: Journal of laser applications : JLA, 31 (4), 042005, 2019
[DOI: 10.2351/1.5096974]

Rittinghaus, Silja-Katharina
Molina Ramirez, Veronica Rocio
Zielinski, Jonas
Hecht, Ulrike

[Fachzeitschriftenartikel]
Understanding the process-microstructure correlations for tailoring the mechanical properties of L-PBF produced austenitic advanced high strength steel
In: Additive manufacturing, 30, 100914, 2019
[DOI: 10.1016/j.addma.2019.100914]

Köhnen, Patrick
Létang, Maike
Voshage, Maximilian Alfons
Schleifenbaum, Johannes Henrich
Haase, Christian

[Fachzeitschriftenartikel]
Scalable 30  fs laser source with 530  w average power
In: Optics letters, 44 (21), 5222 -5225, 2019
[DOI: 10.1364/OL.44.005222]

Rußbüldt, Peter
Weitenberg, Johannes
Schulte, Jan
Meyer, Rudolph
Meinhardt, Christoph
et al.

[Buch, Doktorarbeit]
Bildgebende Prozessüberwachung und -steuerung zur Qualitätssicherung für das Laserstrahlhartlöten, iii, 154 Seiten : Illustrationen, Diagramme, 2019

Ungers, Michael

[Buchbeitrag, Beitrag zu einem Tagungsband]
Incorporation of hyaluronic acid into electrospun thermoplastic urethane membranes for tissue engineering applications
In: 30th Annual conference of the European Society for Biomaterials, ESB 2019 : together with the 26th annual conference of the German Society for Biomaterials (DGBM) : 9-13 September 2019, Dresden, Germany, 1418-1418, 2019

Schneiders, Thomas
Kruse, Magnus Hinrich
Kreinest, Laura
Mela, Petra
Gries, Thomas Gerhard
et al.

[Fachzeitschriftenartikel]
Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process
In: Materials science and engineering / A Structural materials : properties, microstructure and processing properties, microstructure and processing, 767, 138327, 2019
[DOI: 10.1016/j.msea.2019.138327]

Gao, Yang
Zhang, Dongyun
Cao, Ming
Chen, Runping
Feng, Zhe
et al.

[Fachzeitschriftenartikel]
High Power Laser Processing with Ultrafast and Multi-Parallel Beams
In: Journal of Laser Micro/Nanoengineering, 14 (2), 129-137, 2019
[DOI: 10.2961/jlmn.2019.02.0003]

Gillner, Arnold
Finger, J.
Gretzki, P.
Niessen, M.
Bartels, Thilo
et al.

[Fachzeitschriftenartikel]
Adaption of Energy Deposition in Helical Drilling of Multidimensional Micro Holes Using Ultrashort Laser Pulses
In: Journal of Laser Micro/Nanoengineering, 14 (2), 173-178, 2019
[DOI: 10.2961/jlmn.2019.02.0010]

He, Chao
Esch, Dominik
Gillner, Arnold

[Fachzeitschriftenartikel]
Interaction of sub-terahertz radiation with low-doped grating-based AlGaN/GaN plasmonic structures. Time-domain spectroscopy measurements and electrodynamic modeling
In: Semiconductor physics, quantum electronics & optoelectronics : SQO, 22 (2), 237-251, 2019
[DOI: 10.15407/spqeo22.02.237]

Korotyeyev, V. V.
Lyaschuk, Yu. M.
Kochelap, V. A.
Varani, L.
Coquillat, D.
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Characterisation of Additively Manufactured Metallic Stents
In: Procedia Structural Integrity, 15, 41-45, 2019
[DOI: 10.1016/j.prostr.2019.07.008]

Langi, Enzoh
Bisht, Anuj
Silberschmidt, Vadim V.
Ruiz, Pablo D.
Vogt, Felix
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Spectroscopic reflectometry in the EUV for critical dimension metrology
In: Metrology, Inspection, and Process Control for Microlithography XXXIII : 25-28 February 2019, San Jose, California, Unites States / Vladimir A. Ukraintsev, Ofer Adan (editors) ; sponsored by: SPIE, 6 Seiten, 2019
[DOI: 10.1117/12.2513173]

Bahrenberg, Lukas
Danylyuk, Serhiy
Michels, Robert
Glabisch, Sven
Ghafoori, Moein
et al.

[Fachzeitschriftenartikel]
Additive manufacturing of biodegradable Zn-xWE43 porous scaffolds : Formation quality, microstructure and mechanical properties
In: Materials and design, 181, 107937, 2019
[DOI: 10.1016/j.matdes.2019.107937]

Qin, Yu
Wen, Peng
Voshage, Maximilian Alfons
Chen, Yanzhe
Schückler, Paul Georg
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Agile Auslegung optischer Systeme für die Lasertechnik
In: 120. Jahrestagung der Deutschen Gesellschaft für Angewandte Optik e.V. : vom 11. bis 15. Juni 2019 in Darmstadt, 2 Seiten, 2019

König, Hans-Georg
Ali, Zain
Fu, Cailing
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buch, Doktorarbeit]
Modeling of the lateral emission characteristics of high-power edge-emitting semiconductor lasers, 263 Seiten : Illustrationen, Diagramme, 2019

Holly, Carlo

[Beitrag zu einem Tagungsband]
Evaluation of Offline Path Planning for Laser Metal Deposition on Freeform Surfaces
In: [Lasers in Manufacturing 2019, WLT/LIM 2019, 2019-06-24 - 2019-06-27, Munich, Germany], 7 Seiten, 2019

Bold, Marie-Noemi
Pirch, Nobert
Ziegler, Stephan
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Investigation of heat accumulation effects during deep hole percussion drilling by high power ultrashort pulsed laser radiation
In: Journal of laser applications, 31 (2), 022201, 2019
[DOI: 10.2351/1.5096084]

Haasler, Dennis
Finger, Johannes

[Buch, Doktorarbeit]
Robustheitsanalyse des Laserstrahlwendelbohrens, 1 Online-Ressource (viii, 162 Seiten) : Illustrationen, Diagramme, 2019

Zibner, Frank

[Buchbeitrag, Beitrag zu einem Tagungsband]
Alexandrite laser in Q-switched single longitudinal mode operation pumped by a fiber-coupled diode module
In: Solid State Lasers XXVIII: Technology and Devices : 5-7 February 2019, San Francisco, California, United States / W. Andrew Clarkson, Ramesh K. Shori (editors) ; sponsored and published by: SPIE, 1089610, 2019
[DOI: 10.1117/12.2508402]

Munk, Alexander
Jungbluth, Bernd
Strotkamp, Michael
Hoffmann, Hans-Dieter
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
Petawatt and exawatt class lasers worldwide
In: High power laser science and engineering, 7, e54, 2019
[DOI: 10.1017/hpl.2019.36]

Danson, Colin N.
Haefner, Constantin
Bromage, Jake
Butcher, Thomas
Chanteloup, Jean-Christophe F.
et al.

[Fachzeitschriftenartikel]
Laser additive manufacturing of biodegradable magnesium alloy WE43 : A detailed microstructure analysis
In: Acta biomaterialia, 2019
[DOI: 10.1016/j.actbio.2019.05.056]

Bär, Florian
Berger, Leopold
Jauer, Lucas
Kurtuldu, Güven
Schäublin, Robin
et al.

[Buch, Doktorarbeit]
Evaluation of multidimensional data from optoelectronic sensors for the determination of the penetration depth in laser-welding, xv,101 Seiten : Illustrationen, Diagramme, 2019

Özmert, Alp

[Doktorarbeit]
Additive manufacturing of nickel-base superalloy IN738LC by laser powder bed fusion, 1 Online-Ressource (V, 239 Seiten) : Illustrationen, Diagramme, 2019

Risse, Jeroen

[Buch, Doktorarbeit]
Multiphysikalische Simulation und Kompensation thermooptischer Effekte in Optiken für Laseranwendungen, 1 Online-Ressource (ix, 129 Seiten), 2019

Bonhoff, Tobias

[Fachzeitschriftenartikel]
VCSEL pumped VECSEL concept with compact design
In: Electronics letters, 55 (12), 705-707, 2019
[DOI: 10.1049/el.2019.0574]

Herper, Markus
van der Lee, A.
Kolb, J.
Gronenborn, S.
Moench, H.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Potenzial generativ gefertigter Bauteile in der Getriebetechnik
In: Antriebstechnisches Kolloquium ATK 2019 : Tagungsband : Aachen, 12. - 13. März 2019 / herausgegeben von Univ.-Prof. Dr.-Ing. Georg Jacobs und Jonas Marheineke, M. Sc. (Institut für Maschinenelemente und Systementwicklung), 251-264, 2019

Brecher, Christian
Löpenhaus, Christoph
Greschert, René Wolfgang
Poprawe, Reinhart
Schleifenbaum, Johannes Henrich
et al.

[Fachzeitschriftenartikel]
Surface structuring by laser remelting of 1.2379 (D2) for cold forging tools in automotive applications
In: Journal of laser applications, 31 (2), 022017, 2019
[DOI: 10.2351/1.5070077]

Temmler, André
Comiotto, Mirco
Roß, Ingo
Kuepper, M. K.
Liu, Danmei
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Equipment and process windows for laser metal deposition with coaxial wire feeding
In: Journal of laser applications, 31 (2), 022320, 2019
[DOI: 10.2351/1.5096112]

Kelbassa, Jana
Gasser, Andres
Bremer, Jan
Pütsch, Oliver
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
Increasing resource efficiency with an engineering decision support system for comparison of product design variants
In: Journal of cleaner production, 210, 1051-1062, 2018
[DOI: 10.1016/j.jclepro.2018.11.104]

Buchert, Tom
Ko, Nathanael
Graf, Roberta
Vollmer, Thomas
Alkhayat, Moritz
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
EUV-LET 2.0: a compact exposure tool for industrial research at a wavelength of 13.5nm
In: Extreme Ultraviolet (EUV) Lithography X : 25-28 February 2019, San Jose, California, Unites States / Kenneth A. Goldberg (editor) ; sponsored by: SPIE, 2019
[DOI: 10.1117/12.2513755]

Brose, Sascha
Danylyuk, Serhiy
Bahrenberg, Lukas
Lebert, Rainer
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Accounting for laser beam characteristics in the design of freeform optics for laser material processing
In: Advanced Optical Technologies, 8 (3/4), 279-287, 2019
[DOI: 10.1515/aot-2018-0071]

Völl, Annika
Wester, Rolf
Berens, Michael
Buske, Paul
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion
In: Materials, 12 (10), 1706, 2019
[DOI: 10.3390/ma12101706]

Ewald, Simon
Kies, Fabian Martin
Hermsen, Steffen
Voshage, Maximilian Alfons
Haase, Christian
et al.

[Fachzeitschriftenartikel]
Optical and structural characterization of orthorhombic LaLuO3 using extreme ultraviolet reflectometry
In: Thin solid films, 680, 94-101, 2019
[DOI: 10.1016/j.tsf.2019.04.037]

Tryus, Maksym
Nikolaev, Konstantin V.
Makhotkin, Igor A.
Schubert, Jürgen
Kibkalo, Lidia
et al.

[Fachzeitschriftenartikel]
Feasability Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Preheating System
In: Berg- und hüttenmännische Monatshefte : BHM, 164 (3), 101-107, 2019
[DOI: 10.1007/s00501-019-0828-y]

Saewe, Jasmin
Gayer, Christoph
Vogelpoth, Andreas
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Effect of damage incubation in the laser grooving of sapphire
In: Journal of applied physics, 125 (17), 173109, 2019
[DOI: 10.1063/1.5091951]

Sakurai, Haruyuki
He, Chao
Konishi, Kuniaki
Tamaru, Hiroharu
Yumoto, Junji
et al.

[Fachzeitschriftenartikel]
Influence of spatial power modulation on pore and crack formation in laser beam welding of aluminum
In: Journal of laser applications, 31 (2), 022013, 2019
[DOI: 10.2351/1.5085460]

Heinen, Paul
Eichler, Jonas Felix Lambert
Haeusler, André
Olowinsky, Alexander
Aden, Mirko
et al.

[Buch, Doktorarbeit]
Energiedeposition von ultrakurz gepulster Laserstrahlung in Gläsern, 1 Online-Ressource (III, 141 Seiten) : Illustrationen, 2019

Kalupka, Christian

[Fachzeitschriftenartikel]
Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds
In: Materials science and engineering / C, 101, 660-673, 2019
[DOI: 10.1016/j.msec.2019.03.101]

Gayer, Christoph
Ritter, Jessica
Bullemer, Martin
Grom, Stefanie
Jauer, Lucas
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser additive manufacturing of Zn metal parts for biodegradable implants: Effect of gas flow on evaporation and formation quality
In: Journal of laser applications : JLA, 31 (2), 022304, 2019
[DOI: 10.2351/1.5096118]

Chen, Yanzhe
Wen, Peng
Voshage, Maximilian
Jauer, Lucas
Qin, Yu
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
In situ high speed diagnosis - A quantitative analysis of melt flow dynamics inside cutting kerfs during laser fusion cutting with 1 μm wavelength
In: Journal of laser applications : JLA, 31 (2), 022206, 2019
[DOI: 10.2351/1.5096091]

Arntz, Dennis
Petring, Dirk
Schneider, Frank
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Increasing Productivity of Ultrashort Pulsed Laser Ablation in Advance for a Combination Process with ns-laser
In: Journal of Laser Micro/Nanoengineering, 14 (1), 100-107, 2019
[DOI: 10.2961/jlmn.2019.01.0017]

Brenner, Andreas
Bornschlegel, Benedikt
Finger, Johannes

[Fachzeitschriftenartikel]
High-Efficiency Sub-Micrometer Multi-Beam Interference Structuring for Large-Scale Surface Using Ultrashort Laser Pulses
In: Journal of Laser Micro/Nanoengineering, 14 (1), 95-99, 2019
[DOI: 10.2961/jlmn.2019.01.0016]

He, Chao
Vannahme, Kai
Gillner, Arnold

[Fachzeitschriftenartikel]
In-Situ Analysis of Ultrashort Pulsed Laser Ablation with Pulse Bursts
In: Journal of Laser Micro/Nanoengineering, 14 (1), 88-94, 2019
[DOI: 10.2961/jlmn.2019.01.0015]

Bornschlegel, Benedikt
Finger, Johannes

[Fachzeitschriftenartikel]
Laser additive manufacturing of nano-TiC reinforced Ni-based nanocomposites with tailored microstructure and performance
In: Composites / B, Engineering, 163, 585-597, 2019
[DOI: 10.1016/j.compositesb.2018.12.146]

Gu, Dongdong
Zhang, Hongmei
Dai, Donghua
Xia, Mujian
Hong, Chen
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Influence of focal length on the laser metal deposition process with coaxial wire feeding
In: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII / Editor(s): Stefan Kaierle, Stefan W. Heinemann, 2019
[DOI: 10.1117/12.2507799]

Kelbassa, Jana
Biber, Alexander
Wissenbach, Konrad
Gasser, Andres
Pütsch, Oliver
et al.

[Fachzeitschriftenartikel]
Formation Quality, Mechanical Properties, and Processing Behavior of Pure Zinc Parts Produced by Laser-Based Manufacturing for Biodegradable Implants
In: Berg- und hüttenmännische Monatshefte, 164 (3), 133-140, 2019
[DOI: 10.1007/s00501-019-0829-x]

Voshage, Maximilian
Wen, Peng
Schaukellis, Max
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Investigations on the Interplay Between Focusing and Absorption in Absorber-Free Laser Transmission Welding of Plastics
In: Lasers in manufacturing and materials processing, 6 (2), 113-125, 2019
[DOI: 10.1007/s40516-019-00083-1]

Mamuschkin, Viktor
Aden, Mirko
Olowinsky, Alexander

[Buchbeitrag, Beitrag zu einem Tagungsband]
Introducing a Holistic Profitability Model for Additive Manufacturing : An Analysis of Laser-powder Bed Fusion
In: 2018 IEEE International Conference on Industrial Engineering & Engineering Management : IEEE IEEM2018 : 16-19 Dec., Bangkok, Thailand / organizers: IEEE TEMS Thailand Chapter, IEEE TEMS Singapore Chapter, IEEE TEMS Hong Kong Chapter, 1730-1735, 2019
[DOI: 10.1109/IEEM.2018.8607729]

Piller, Frank Thomas
Poprawe, Reinhart
Schleifenbaum, Johannes Henrich
Schuh, Günther
Barg, Sebastian Julian
et al.

[Fachzeitschriftenartikel]
Laser Powder Bed Fusion of Advanced High-Strength Steels : Modification of Deformation Mechanisms by Increasing Stacking Fault Energy
In: Berg- und hüttenmännische Monatshefte : BHM, 164 (3), 127-132, 2019
[DOI: 10.1007/s00501-019-0830-4]

Ewald, Simon
Schaukellis, Max
Köhnen, Patrick
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Local laser softening of high-strength steel with an adapted intensity
In: Journal of laser applications : JLA, 31 (1), 012007, 2019
[DOI: 10.2351/1.5052147]

Vogt, Sabrina
Völl, Annika
Wollgarten, Susanne
Freese, T.
Stollenwerk, Jochen Hugo
et al.

[Fachzeitschriftenartikel]
Fast and easy fabrication methodology of Fresnel zone plates for the extreme ultraviolet and soft x-ray regions
In: Applied optics, 58 (4), 1057-1063, 2019
[DOI: 10.1364/AO.58.001057]

Schümmer, A.
Mertins, H.-Ch.
Schneider, Claus Michael
Adam, Roman
Trellenkamp, Stefan
et al.

[Fachzeitschriftenartikel]
Numerical simulation in the absorption behavior of Ti6Al4V powder materials to laser energy during SLM
In: Journal of materials processing technology, 268, 25-36, 2019
[DOI: 10.1016/j.jmatprotec.2019.01.002]

Zhang, Dongyun
Wang, Weidong
Guo, Yanwu
Hu, Songtao
Dong, Dongdong
et al.

[Fachzeitschriftenartikel]
Investigation of the Lithium-Containing Aluminum Copper Alloy (AA2099) for the Laser Powder Bed Fusion Process [L-PBF] : Effects of Process Parameters on Cracks, Porosity, and Microhardness
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 71 (4), 1543-1553, 2019
[DOI: 10.1007/s11837-019-03367-1]

Raffeis, Iris
Adjei-Kyeremeh, Frank
Vroomen, Uwe
Suwanpinij, Piyada
Ewald, Simon
et al.

[Fachzeitschriftenartikel]
Strongly Out-of-Equilibrium Columnar Solidification During Laser Powder-Bed Fusion in Additive Manufacturing
In: Physical review applied, 11 (1), 014025, 2019
[DOI: 10.1103/PhysRevApplied.11.014025]

Boussinot, Guillaume
Apel, Markus
Zielinski, Jonas
Hecht, Ulrike
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Cargo shuttling by electrochemical switching of core-shell microgels obtained by a facile one-shot polymerization
In: Chemical science, 10 (6), 1844-1856, 2018
[DOI: 10.1039/C8SC04369H]

Mergel, Olga
Schneider, Sabine
Tiwari, Rahul
Kühn, Philipp T.
Keskin, Damla
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Laser additive manufacturing of Zn porous scaffolds : Shielding gas flow, surface quality and densification
In: Journal of materials science & technology : JMST, 35 (2), 368-376, 2018
[DOI: 10.1016/j.jmst.2018.09.065]

Wen, Peng
Qin, Yu
Chen, Yanzhe
Voshage, Maximilian
Jauer, Lucas
et al.

[Fachzeitschriftenartikel]
Additive manufactured WE43 magnesium: A comparative study of the microstructure and mechanical properties with those of powder extruded and as-cast WE43
In: Materials characterization, 147, 384-397, 2018
[DOI: 10.1016/j.matchar.2018.11.011]

Zumdick, Naemi Aimée
Jauer, Lucas
Kersting, Lisa C.
Kutz, Tatiana Nicole
Schleifenbaum, Johannes Henrich
et al.

[Fachzeitschriftenartikel]
Spatially Resolved Spectroscopic Extreme Ultraviolet Reflectometry for Laboratory Applications
In: Journal of nanoscience and nanotechnology, 19 (1), 562-567, 2019
[DOI: 10.1166/jnn.2019.16470]

Tryus, Maksym
Herbert, Stefan
Wilson, Daniel
Bahrenberg, Lukas
Danylyuk, Serhiy
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Porous structure design and fabrication of metal-bonded diamond grinding wheel based on selective laser melting (SLM)
In: The international journal of advanced manufacturing technology, 100 (5/8), 1451-1462, 2018
[DOI: 10.1007/s00170-018-2734-y]

Tian, Chenchen
Li, Xuekun
Zhang, Shubo
Guo, Guoqiang
Ziegler, Stephan
et al.

[Fachzeitschriftenartikel]
Study of nickel-based super-alloys Inconel 718 and Inconel 625 in high-deposition-rate laser metal deposition
In: Optics & laser technology, 109, 352-360, 2018
[DOI: 10.1016/j.optlastec.2018.08.003]

Zhong, Chongliang
Kittel, Jochen
Gasser, Andres
Schleifenbaum, Johannes Henrich

[Doktorarbeit]
Digitale photonische Produktion, II, 102 Seiten : Illustrationen, Diagramme, 2018

Hinke, Christian Rüdiger

[Buch, Doktorarbeit]
Emissionscharakteristik von XUV-Strahlungsquellen bei Wellenlängen im Spektralbereich zwischen 2 und 10 nm, iv, 132 Seiten : Illustrationen, Diagramme, 2018

von Wezyk, Alexander

[Abstract, Beitrag zu einem Tagungsband]
Biodegradable Zn metal implants manufactured by laser powder bed fusion
In: Abstract Book : 10th Biometal Symposium on Biodegradable Metals for Biomedical Applications, August 26 - 31 St. Catherine's College, University of Oxford, United Kingdom / abstract book team: Sergio Loffredo, Ana Laura Ramirez-Ledesma, Met-26, 1 Seite, 2018

Qin, Yu
Wen, Peng
Chen, Yanzhe
Jauer, Lucas
Voshage, Maximilian Alfons
et al.

[Beitrag zu einem Tagungsband]
Characterization of additively manufactured metal flexure hinges
In: 2018 ASPE and euspen Summer Topical Meeting Advancing Precision in Additive Manufacturing : July 22-25, 2018 : proceedings / euspen ; American Society for Precision Engineering ; co-chairs: John S. Taylor (University of North Carolina, Charlotte), Richard K. Leach (University of Nottingham, UK), 101-103, 2018

Kimm, Martin
Schuekler, P.
Corves, Burkhard
Schleifenbaum, Johannes Henrich
Schoenen, D.

[Abstract, Beitrag zu einem Tagungsband]
Process Chain for Additive Manufacturing of Magnesium Implants
In: eCM Online Periodical , 2018, Collection 6, Met-25, 1 Seite, 2018

Jauer, Lucas
Kimm, Martin
Labude, Norina
Bienert, M.
Neuß, S.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Microstructure of WE43 fabricated by Laser-Powder Bed Fusion in comparison to conventional processing routes
In: eCM Meeting Abstracts. - 2018, Collection 6, 21, 2018

Berger, L.
Bär, F.
Jauer, Lucas
Schäublin, R.
Schleifenbaum, Johannes Henrich
et al.

[Doktorarbeit]
Bildgebung im kurzwelligen Spektralbereich zur Inspektion von Nanodefekten, 1 Online-Ressource (v, 148 Seiten) : Illustrationen, Diagramme, 2018

Herbert, Stefan

[Buch, Doktorarbeit]
Anwendungsspezifische Prozessführung des Selective Laser Melting am Beispiel von AlSi-Legierungen im Automobilbau, ii, 215 Seiten : Illustrationen, Diagramme, 2018

Meixlsperger, Maximilian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Einfluss des Einfallswinkels der Laserstrahlung auf die Positionsabhängigkeit der Bauteilqualität im L-PBF-Prozess
In: Rapid.Tech + FabCon 3.D - International Trade Show & Conference for Additive Manufacturing : Proceedings of the 15th Rapid.Tech Conference, Erfurt, Germany, 5-7 June 2018 / Michael Kynast, Michael Eichmann, Gerd Witt (Hrsg.), 198-216, 2018
[DOI: 10.3139/9783446458123.013]

Schniedenharn, Maximilian
Schleifenbaum, Johannes Henrich

[Beitrag zu einem Tagungsband]
Additive manufacturing processes in fluid power - properties and opportunities demonstrated at a flow-optimized fitting
In: Proceedings of 2018 International Conference on Hydraulics and Pneumatics - HERVEX : November 7-9, Băile Govora, Romania, 12-23, 2018

Matthiesen, Gunnar
Merget, Daniel
Rückert, Marcel
Schmitz, Katharina
Schleifenbaum, Johannes Henrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Diamond lenses enable ultra-compact and lightweight laser processing heads
In: [Proceedings of the 90th Laser Materials Processing Conference : 2018-12-10 - 2018-12-11, Tokyo, Japan], S. 135-138, 2018

Traub, Martin
Holly, Carlo
Di Meo, Angelo
Arntz, Dennis
Hesker, Mario
et al.

[Doktorarbeit]
Modellierung und Simulation der Degradation Mikrogel-funktionalisierter Fasern aus Polyester, 1 Online-Ressource (VIII, 163 Seiten) : Illustrationen, Diagramme, 2018

Bürgermeister, Lisa

[Beitrag zu einem Tagungsband]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steel AISI M50 with Base Plate Preheating System
In: [Metal Additive Manufacturing Conference, MAMC 2018, 2018-11-21 - 2018-11-23, Wien, Austria], 2018

Saewe, Jasmin
Gayer, Christoph
Vogelpoth, Andreas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison of material specific rim zone effects of Ti6Al4V machined by wire EDM in water- and CH- based dielectrics
In: 4th CIRP Conference on Surface Integrity (CSI 2018) / Edited by Fengzou Fang, 238-243, 2018
[DOI: 10.1016/j.procir.2018.05.064]

Klocke, Fritz
Smeets, Gregor Gabriel
Kittel, Mario
Olivier, Marcel Christoph
Hama-Saleh, Rebar
et al.

[Buch, Doktorarbeit]
Laser Powder Bed Fusion von Magnesiumlegierungen, 1 Online-Ressource (II, 165 Seiten) : Illustrationen, Diagramme, 2018

Jauer, Lucas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Holographic masks for computational proximity lithography with EUV radiation
In: International Conference on Extreme Ultraviolet Lithography 2018 : 17-20 September 2018, Monterey, California, United States / Kurt G. Ronse, Eric Hendrickx, Patrick P. Naulleau, Paolo A. Gargini, Toshiro Itani (editors) ; sponsored by: SPIE, 2018
[DOI: 10.1117/12.2502879]

Deuter, Valerie
Grochowicz, Maciej
Brose, Sascha
Biller, J.
Danylyuk, Serhiy
et al.

[Doktorarbeit]
Laserbasierte Herstellung funktionaler Beschichtungen aus partikulärem Polyetheretherketon, 1 Online-Ressource (III, 159, A-15 Seiten) : Illustrationen, Diagramme, 2018

Sändker, Hendrik

[Buch, Doktorarbeit]
Simulation hochdynamischer Vorgänge in der Schmelze beim Laserstrahlschneiden, vi, 131 Seiten : Illustrationen, Diagramme, 2018

Halm, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Actinic tools for EUV resist characterization in research and production
In: International Conference on Extreme Ultraviolet Lithography 2018 : 17-20 September 2018, Monterey, California, United States / Kurt G. Ronse, Eric Hendrickx, Patrick P. Naulleau, Paolo A. Gargini, Toshiro Itani (editors) ; sponsored by: SPIE, UNSP 108091V, 2018
[DOI: 10.1117/12.2501800]

Lebert, Rainer
Missalla, T.
Phiesel, Christoph
Piel, Christian
Brose, Sascha
et al.

[Beitrag zu einem Tagungsband]
Improving the Fatigue Strength of L-PBF Manufactured IN718 Samples by HIP Post Processing
In: [World Congress on Powder Metallurgy, World PM2018, 2018-09-16 - 2018-09-20, Beijing, Peoples R China], 1665-1672, 2018

Kaletsch, Anke
Heine, Luisa-Marie
Kunz, Johannes
Bremen, Sebastian
Schleifenbaum, Johannes Henrich
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Influence Of Powder Bed Temperature On Microstructure And Post Heat Treatment Of High Speed Steel AISI M50 Processed By Laser-Powder Bed Fusion
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Kunz, Johannes
Herzog, Simone
Kaletsch, Anke
Saewe, Jasmin
Gayer, Christoph
et al.

[Fachzeitschriftenartikel]
Qualitätsüberwachung von laserverschweißten Tapes aus faserverstärkten Kunststoffen mittels Thermographie
In: Joining plastics = Fügen von Kunststoffen, 12 (3), 160-165, 2018

Lanfermann, Andrea
Abels, Peter
Gomer, Andreas
Schomburg, Werner

[Buchbeitrag, Beitrag zu einem Tagungsband]
Glass cutting optimization with pump-probe microscopy and Bessel beam profiles
In: Frontiers in Ultrafast Optics: Biomedical, Scientific, and Industrial Applications XVIII : 28-30 January 2018, San Francisco, California, United States / Peter R. Herman, Michel Meunier, Roberto Osellame (editors) ; sponsored by: SPIE, 2018
[DOI: 10.1117/12.2289943]

Jenne, Michael
Flamm, Daniel
Ouaj, Taoufiq
Hellstern, Julian
Grossmann, Daniel
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Advanced in-situ diagnostics of ultra short pulsed micromachining in glass
In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII : 29-31 January 2018, San Francisco, California, United States / Beat Neuenschwander, Costas P. Grigoropoulos, Tetsuya Makimura, Gediminas Račiukaitis (editors) ; sponsored by: SPIE, 105190C, 2018
[DOI: 10.1117/12.2289801]

Grossmann, Daniel
Jenne, Michael
Flamm, Daniel
Kleiner, Jonas
Zimmermann, Felix
et al.

[Fachzeitschriftenartikel]
Multi Pulse Pump-Probe Diagnostics for Development of Advanced Transparent Materials Processing
In: Journal of Laser Micro/Nanoengineering, 13 (3), 273-279, 2018
[DOI: 10.2961/jlmn.2018.03.0022]

Jenne, Michael
Zimmermann, F.
Flamm, D.
Großmann, D.
Kleiner, J.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Development of an adaptive laser beam shaper
In: Laser Resonators, Microresonators, and Beam Control XX : 29 January-1 February 2018, San Francisco, California, United States / Alexis V. Kudryashov, Alan H. Paxton, Vladimir S. Ilchenko (editors) ; sponsored and published by: SPIE, UNSP 1051819, 2018
[DOI: 10.1117/12.2287577]

König, Hans-Georg
Pütsch, Oliver
Lange, Felix Rolf Lutz
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
50 years of the Laser Institute of America
In: Journal of laser applications : JLA, 30 (4), 041001, 2018
[DOI: 10.2351/1.5056768]

Poprawe, Reinhart
Brandt, Milan
Quick, Nathaniel R.
Solis, Brian H.
Lu, Yongfeng

[Buchbeitrag, Beitrag zu einem Tagungsband]
Development of Adapted Ni-738 Powder for Additive Manufacturing
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Vogekpoth, Andreas
Sharma, Satyajeet
Schleifenbaum, Johannes Henrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Feasibility Investigation for Laser Powder Bed Fusion of High-Speed Steels
In: Euro PM2018 proceedings : 14-18 October 2018, Bilbao Exhibition Centre (BEC), Bilbao, Spain / Euro PM2018 Congress & Exhibition ; European Powder Metallurgy Association, 2018

Saewe, Jasmin
Gayer, Christoph
Jauer, Lucas
Kunz, Johannes
Broeckmann, Christoph
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Additive Manufacturing of Honeycombs Seal Strips
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition - 2018 : presented at the ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway / sponsored by the International Gas Turbine Institute Volume 2: Turbomachinery, V02DT46A023, 8 Seiten, 2018
[DOI: 10.1115/GT2018-77081]

Geisen, Ole
Kersting, Lisa
Masseling, Lukas
Bogner, Jan Pascal
Schleifenbaum, Johannes Henrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Increasing productivity of ultrashort pulsed laser ablation for commercialization of micro structuring
In: Nanoengineering: Fabrication, Properties, Optics, and Devices XV : 21-23 August 2018, San Diego, California, United States / Balaji Panchapakesan, Anne E. Sakdinawat, André-Jean Attias, Elizabeth A. Dobisz (editors) ; sponsored and published by: SPIE, 107300H, 2018
[DOI: 10.1117/12.2319741]

Brenner, Andreas
Bornschlegel, Benedikt
Finger, Johannes

[Buch, Doktorarbeit]
Laserstrahl-Bohren von CFK-Preforms, 1 Online-Ressource (VI, 156 Seiten) : Illustrationen, 2018

Janssen, Stefan

[Fachzeitschriftenartikel]
Design of high-manganese steels for additive manufacturing applications with energy-absorption functionality
In: Materials and design, 160, 1250-1264, 2018
[DOI: 10.1016/j.matdes.2018.10.051]

Kies, Fabian Martin
Köhnen, Patrick
Wilms, Markus B.
Brasche, Frederike Lina
Pradeep, Konda Gokuldoss
et al.

[Fachzeitschriftenartikel]
Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
In: Rapid prototyping journal, 24 (8), 1296-1304, 2018
[DOI: 10.1108/RPJ-07-2017-0149]

Schniedenharn, Maximilian
Wiedemann, Frederik
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
Laser-structured high performance PVD coatings
In: Surface and coatings technology, 352, 302-312, 2018
[DOI: 10.1016/j.surfcoat.2018.07.094]

Bobzin, Kirsten
Brögelmann, Tobias
Gillner, Arnold
Kruppe, Nathan Christopher
He, Chao
et al.

[Beitrag zu einem Tagungsband]
Transient spatially resolved irradiation for responding to varying thermal conditions in thermoplastic tape placement
In: [Sampe Conference 18 Southampton], 2018

Striet, Philipp
Weiler, Thomas
Emonts, Michael Gustav
Völl, Annika
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Probing the potential of structured and surface functionalized tools for dry cold forging of aluminium
In: 5th International Conference on New Forming Technology (ICNFT 2018) : Bremen, Germany, September 18-21, 2018 / F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan (eds.), 14010, [1]-7, 2018
[DOI: 10.1051/matecconf/201819014010]

Teller, Marco
Roß, Ingo
Prünte, Stephan
Temmler, André
Küpper, Moritz Emanuel
et al.

[Fachzeitschriftenartikel]
Ultrashort Pulse Processing of Transparent Ceramics: The Role of Electronic and Thermal Damage Mechanisms
In: Journal of Laser Micro/Nanoengineering, 13 (2), 126-130, 2018
[DOI: 10.2961/jlmn.2018.02.0012]

Kalupka, Christian
Schmalstieg, Martin
Reininghaus, Martin

[Fachzeitschriftenartikel]
Ageing response of an Al-Mg-Mn-Sc-Zr alloy processed by laser metal deposition in thin-wall structures
In: Vacuum, 158, 121-125, 2018
[DOI: 10.1016/j.vacuum.2018.09.052]

Zhao, Tong
Cai, Wangcan
Dahmen, Marius
Schaible, Jonathan
Hong, Chen
et al.

[Poster]
Konfiguration der Mikrostruktur eines ferritisch-austenitischen Duplexstahls in der SLM-Fertigung
In: Fachtagung Werkstoffe und Additive Fertigung Postdam 2018-04-25 - 2018-04-26, 1 Seite, 2018

Raffeis, Iris
Vroomen, Uwe
Westhoff, Elmar
Bremen, Sebastian Wilhelm
Schaberger-Zimmermann, Elke

[Fachzeitschriftenartikel]
Nanospectroscopy of Infrared Phonon Resonance Enables Local Quantification of Electronic Properties in Doped SrTiO3 Ceramics
In: Advanced functional materials, 28 (42), 1802834, 2018
[DOI: 10.1002/adfm.201802834]

Lewin, Martin
Bäumer, Christoph
Gunkel, Felix
Schwedt, Alexander
Gaussmann, Fabian
et al.

[Doktorarbeit]
Design und Charakteristik eines satellitentauglichen optisch-parametrischen Oszillators im nahen Infrarot, 1 Online-Ressource (IX,147 Seiten) : Illustrationen, Diagramme, 2018

Livrozet, Marie Jeanne

[Buchbeitrag, Beitrag zu einem Tagungsband]
Ultrafast dynamics of material excitation of dielectrics with ultrashort pulsed Bessel beams
In: Laser-Based Micro- and Nanoprocessing XII : 31 January-1 February 2018, San Francisco, California, United States / Udo Klotzbach, Kunihiko Washio, Rainer Kling (editors) ; sponsored and published by: SPIE, 8 Seiten, 2018
[DOI: 10.1117/12.2287337]

Kalupka, Christian
Holtum, Tim
Reininghaus, Martin

[Fachzeitschriftenartikel]
Local laser softening of press-hardened steel at high feed rates
In: Journal of laser applications, 30 (3), 031201, 2018
[DOI: 10.2351/1.5039857]

Vogt, Sabrina
Bechheim, L.
Banik, Janko
Flaischerowitz, M.
Weisheit, Andreas
et al.

[Fachzeitschriftenartikel]
In situ visualization of multiple reflections on the cut flank during laser cutting with 1 μm wavelength
In: Journal of laser applications, 30 (3), 032206, 2018
[DOI: 10.2351/1.5040614]

Arntz, Dennis
Petring, Dirk
Stoyanov, Stoyan
Halm, Ulrich
Schneider, Frank
et al.

[Fachzeitschriftenartikel]
Temperature field and residual stress distribution for laser metal deposition
In: Journal of laser applications, 30 (3), 032503, 2018
[DOI: 10.2351/1.5040634]

Pirch, Norbert
Niessen, Markus
Linnenbrink, Stefanie
Schopphoven, Thomas
Gasser, Andres
et al.

[Fachzeitschriftenartikel]
Selective laser melting of rare earth element Sc modified aluminum alloy: Thermodynamics of precipitation behavior and its influence on mechanical properties
In: Additive manufacturing, 23, 1-12, 2018
[DOI: 10.1016/j.addma.2018.07.002]

Zhang, Han
Gu, Dongdong
Yang, Jiankai
Dai, Donghua
Zhao, Tong
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Simulation of the dynamics of heat accumulation during in-volume modification with ultrashort laser pulses
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 705-708, 2018
[DOI: 10.1016/j.procir.2018.08.037]

Nippgen, Sebastian
Gillner, Arnold
Smolenko, Andreas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Quantitative study of melt flow dynamics inside laser cutting kerfs by in-situ high-speed video-diagnostics
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 640-644, 2018
[DOI: 10.1016/j.procir.2018.08.057]

Arntz, Dennis
Petring, Dirk
Stoyanov, Stoyan
Quiring, N.
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Machine learning as a comparative tool to determine the relevance of signal features in laser welding
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 623-627, 2018
[DOI: 10.1016/j.procir.2018.08.073]

Knaak, Christian
Thombansen, Ulrich
Abels, Peter
Kröger, Moritz

[Buchbeitrag, Beitrag zu einem Tagungsband]
Investigations on energy deposition in polycarbonate by picosecond laser pulses for welding applications
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 315-319, 2018
[DOI: 10.1016/j.procir.2018.08.122]

Nguyen, Nam-Phong
Fatherazi, Patricia
Nippgen, Sebastian
Brosda, Maximilian
Olowinsky, Alexander
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Helical drilling of three-dimensional conical converging-diverging nozzle in steel using ultrashort laser pulses
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 305-309, 2018
[DOI: 10.1016/j.procir.2018.08.120]

He, Chao
Bühring, Jannik
Gillner, Arnold

[Buchbeitrag, Beitrag zu einem Tagungsband]
Model-based analysis of highly dynamic laser beam shaping using deformable mirrors
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 602-606, 2018
[DOI: 10.1016/j.procir.2018.08.078]

Hofmann, Oskar
Pütsch, Oliver
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Multi-physical analysis of thermo-optical effects for different Selective Laser Melting (SLM) scanning strategies
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 97-101, 2018
[DOI: 10.1016/j.procir.2018.08.048]

Bonhoff, Tobias
Poppe, Marcus
Stollenwerk, Jochen Hugo
Schleifenbaum, Johannes Henrich
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser additive manufacturing of oxide dispersion strengthened steels using laser-generated nanoparticle-metal composite powders
In: 10th CIRP Conference on Photonic Technologies [LANE 2018] / Edited by M. Schmidt, F. Vollertsen, G. Dearden, 196-200, 2018
[DOI: 10.1016/j.procir.2018.08.093]

Wilms, Markus B.
Streubel, René
Frömel, Felix
Weisheit, Andreas
Tenkamp, Jochen
et al.

[Fachzeitschriftenartikel]
Structural properties of templated Ge quantum dot arrays : impact of growth and pre-pattern parameters
In: Nanotechnology, 29 (27), 275601, 2018
[DOI: 10.1088/1361-6528/aabf07]

Tempeler, J.
Danylyuk, Serhiy
Brose, Sascha
Loosen, Peter
Juschkin, Larissa

[Fachzeitschriftenartikel]
Application specific intensity distributions for laser materials processing : Tailoring the induced temperature profile
In: Optics & laser technology, 108, 583-591, 2018
[DOI: 10.1016/j.optlastec.2018.07.048]

Völl, Annika
Vogt, Sabrina
Wester, Rolf
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite
In: Surface and coatings technology, 349, 279-288, 2018
[DOI: 10.1016/j.surfcoat.2018.05.072]

Dai, Donghua
Gu, Dongdong
Xia, Mujian
Ma, Chenglong
Chen, Hongyu
et al.

[Fachzeitschriftenartikel]
Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering
In: Journal of the mechanical behavior of biomedical materials, 87, 267-278, 2018
[DOI: 10.1016/j.jmbbm.2018.07.021]

Gayer, Christoph
Abert, Jessica
Bullemer, Martin
Grom, Stefanie
Jauer, Lucas
et al.

[Fachzeitschriftenartikel]
Quality improvement of the surface of laser micro welds by using a dual beam setup
In: Journal of laser applications, 30 (3), 032423, 2018
[DOI: 10.2351/1.5040626]

Haeusler, André
Hollatz, Sören
Olowinsky, Alexander
Gillner, Arnold
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Digital photonic production along the lines of industry 4.0
In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXIII : 29-31 January 2018, San Francisco, California, United States / Beat Neuenschwander, Costas P. Grigoropoulos, Tetsuya Makimura, Gediminas Račiukaitis Editors, 17 S., 2018
[DOI: 10.1117/12.2292316]

Poprawe, Reinhart
Hinke, Christian
Meiners, Wilhelm
Eibl, Florian
Zarei, Omid
et al.

[Fachzeitschriftenartikel]
Zweistufiges Laserstrahlbeschichten für Funktions- und Verschleißschutzschichten
In: Schweissen und Schneiden, 70 (6), 384-389, 2018

Maischner, Dora
Roß, Ingo
Weisheit, Andreas
Deschuyteneer, Dorian
Petit, Fabrice
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Solving the Monge-Ampère equation on triangle-meshes for use in optical freeform design
In: Illumination Optics V : 14-16 May 2018, Frankfurt, Germany / Tina E. Kidger, Stuart David Editor, 6 S., 2018
[DOI: 10.1117/12.2313454]

Wester, Rolf
Völl, Annika
Berens, Michael
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Density estimation in optical phase space for optimizing micro-optical elements on freeform surfaces
In: Computational Optics II : 15-17 May 2018, Frankfurt, Germany / Daniel G. Smith, Frank Wyrowski, Andreas Erdmann, Editors, 8 S., 2018
[DOI: 10.1117/12.2313487]

Berens, Michael
Völl, Annika
Wester, Rolf
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Free-form optics for non-idealized light sources in 3D: a phase-space approach
In: Illumination Optics V : 14-16 May 2018, Frankfurt, Germany / Tina E. Kidger, Stuart David Editor, 2018
[DOI: 10.1117/12.2311995]

Völl, Annika
Wester, Rolf
Buske, Paul
Berens, Michael
Stollenwerk, Jochen Hugo
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
The Value of Metal Additve Manufacturing with Diode Lasers : How the use of an inexpensive beam source can influence the adaption of metal 3D printing
In: Laser-Technik-Journal, 15 (2), 58-60, 2018
[DOI: 10.1002/latj.201800011]

Knothe, Mirjam Tabea

[Fachzeitschriftenartikel]
Laser additive manufacturing of Zn metal parts for biodegradable applications : Processing, formation quality and mechanical properties
In: Materials and design, 155, 36-45, 2018
[DOI: 10.1016/j.matdes.2018.05.057]

Wen, Peng
Voshage, Maximilian
Jauer, Lucas
Chen, Yanzhe
Qin, Yu
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
On the Correlation of the Shielding Gas Flow in L-PBF Machines with Part Density
In: DDMC 2018 : Fraunhofer Direct Digital Manufacturing Conference : proceedings : Direct Digital Manufacturing Conference, Berlin, March 14-15, 2018 / Fraunhofer Generativ, 289-295, 2018

Schniedenharn, Maximilian
Schleifenbaum, Johannes Henrich

[Fachzeitschriftenartikel]
In situ investigation of production processes in a large chamber scanning electron microscope
In: Ultramicroscopy, 193, 151-158, 2018
[DOI: 10.1016/j.ultramic.2018.07.002]

Aretz, Anke
Ehle, Lisa Christine
Häusler, André
Bobzin, Kirsten
Öte, Mehmet
et al.

[Fachzeitschriftenartikel]
Spatial dispersion of the high-frequency conductivity of two-dimensional electron gas subjected to a high electric field : Collisionless case
In: Applied physics letters, 113 (4), 041102, 2018
[DOI: 10.1063/1.5041322]

Korotyeyev, V. V.
Kochelap, V. A.
Danylyuk, Serhiy
Varani, L.

[Buch, Doktorarbeit]
Partikelfreier Abtrag von Schichtsystemen für Feststoffbatterien mittels Ultrakurzpuls-Laserbearbeitung, 1 Online-Ressource (vi, 153 Seiten) : Illustrationen, 2018

Hördemann, Christian

[Buchbeitrag, Fachzeitschriftenartikel]
Investigation of Friction Conditions in Dry Metal Forming of Aluminum by Extended Conical Tube-Upsetting Test
In: Key engineering materials, 767, 189-195, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.189]

Teller, Marco
Ross, Ingo
Temmler, André
Poprawe, Reinhart
Prünte, Stephan
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Laser Polishing of Cold Work Steel AISI D2 for Dry Metal Forming Tools : Surface Homogenization, Refinement and Preparation for Self-Assembled Monolayers
In: Key engineering materials, 767, 69-76, 2018
[DOI: 10.4028/www.scientific.net/KEM.767.69]

Roß, Ingo
Temmler, André
Küpper, Moritz Emanuel
Prünte, Stephan
Teller, Marco
et al.

[Fachzeitschriftenartikel]
UV radiation enhanced oxygen vacancy formation caused by the PLD plasma plume
In: Scientific reports, 8 (1), 8846, 2018
[DOI: 10.1038/s41598-018-27207-5]

Hensling, F. V. E.
Keeble, D. J.
Zhu, J.
Brose, Sascha
Xu, C.
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
In: Vacuum : surface engineering, surface instrumentation & vacuum technology, 154, 341-350, 2018
[DOI: 10.1016/j.vacuum.2018.05.030]

Dai, Donghua
Gu, Dongdong
Zhang, Han
Zhang, Jiayao
Du, Yuexin
et al.

[Buch, Doktorarbeit]
CAM-NC-Datenkette für die Laserbearbeitung von Freiformflächen mit simultaner Bewegung mechanischer Achsen und galvanometrischem Laserscanner, 1 Online-Ressource (II, 114, A-11 Seiten) : Illustrationen, Diagramme, 2018

Flemmer, John

[Doktorarbeit]
Grenzen der Lochdichte beim Perkussionsbohren mit Ultrakurzpulslasern, 1 Online-Ressource (VIII, 137 Seiten) : Illustrationen, Diagramme, 2018

Hambach, Nelli

[Fachzeitschriftenartikel]
Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites
In: Materials and design, 154, 360-369, 2018
[DOI: 10.1016/j.matdes.2018.05.044]

Doñate-Buendía, Carlos
Frömel, Felix
Wilms, Markus B.
Streubel, René
Tenkamp, Jochen
et al.

[Buch, Doktorarbeit]
Laserbasierte Formkorrektur von optischen Gläsern, II, 132 Seiten : Illustrationen, 2018

Weingarten, Christian

[Fachzeitschriftenartikel]
Residual stress reduction of laser beam welds by use of low-transformation-temperature (LTT) filler materials in carbon manganese steels—In situ diagnostic: Image correlation
In: Journal of laser applications : JLA, 30 (3), 032416, 2018
[DOI: 10.2351/1.5040599]

Gach, Stefan
Olschok, Simon
Arntz, Dennis
Reisgen, Uwe Kaspar

[Fachzeitschriftenartikel]
LIBS analyses for industrial applications : an overview of developments from 2014 to 2018
In: Journal of analytical atomic spectrometry : JAAS, 33 (6), 945-956, 2018
[DOI: 10.1039/C8JA00076J]

Noll, Reinhard
Fricke-Begemann, Cord
Connemann, Sven
Meinhardt, Christoph
Sturm, Volker

[Fachzeitschriftenartikel]
Diode-pumped alexandrite ring laser in single-longitudinal mode operation for atmospheric lidar measurements
In: Optics express, 26 (12), 14928-14935, 2018
[DOI: 10.1364/OE.26.014928]

Munk, Alexander
Jungbluth, B.
Strotkamp, M.
Hoffmann, H.-D.
Poprawe, Reinhart
et al.

[Buch, Doktorarbeit]
Interaktive Prozesssimulation für das industrielle Umfeld am Beispiel des Bohrens mit Laserstrahlung, vi, 123 Seiten : Illustrationen, 2018

Hermanns, Torsten

[Fachzeitschriftenartikel]
Heat input and accumulation for ultrashort pulse processing with high average power
In: Advanced Optical Technologies, 7 (3), 145-155, 2018
[DOI: 10.1515/aot-2018-0008]

Finger, Johannes
Bornschlegel, Benedikt
Reininghaus, Martin
Dohrn, Andreas
Nießen, Markus
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Mechanical properties of sheet metal components with local reinforcement produced by additive manufacturing
In: Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018 / editors: Livan Fratini, Rosa Di Lorenzo, Gianluca Buffa, Guiseppe Ingaro, 160028, 2018
[DOI: 10.1063/1.5035054]

Ünsal, Ismail
Hama-Saleh, Rebar
Sviridov, Alexander
Bambach, Markus
Weisheit, Andreas
et al.

[Doktorarbeit]
Magnetic properties of self-assembled manganese oxide and iron oxide nanoparticles : Spin structure and composition, 1 Online-Ressource (ii, 178 Seiten) : Illustrationen, 2018

Sun, Xiao

[Buch, Doktorarbeit]
Erhöhung der Strahldichte von Hochleistungs-Diodenlaserbarren mittels dielektrischer Kantenfilter, II, 133 Seiten, 2018

Witte, Ulrich

[Doktorarbeit]
Manipulation of magnetism in iron oxide nanoparticle : BaTiO3 composites and low-dimensional iron oxide nanoparticle arrays, 1 Online-Ressource (151 Seiten) : Illustrationen, 2018

Wang, Li-Ming

[Fachzeitschriftenartikel]
Direct laser cladding of the silicide dispersed titanium aluminide (Ti45Al5Nb0.5Si) composites
In: Optics & laser technology, 106, 182-190, 2018
[DOI: 10.1016/j.optlastec.2018.03.012]

Majumdar, Jyotsna Dutta
Rittinghaus, Silja-Katharina
Wissenbach, Konrad
Höche, Daniel
Blawert, Carsten
et al.

[Fachzeitschriftenartikel]
High-Efficiency Nanostructuring using Multi-Beam Interference by Consecutively Deposited Ultrashort Laser Pulses on Tool Steel
In: Journal of Laser Micro/Nanoengineering, 13 (1), 1-5, 2018
[DOI: 10.2961/jlmn.2018.01.0001]

He, Chao
Steger, Michael
Gillner, Arnold

[Fachzeitschriftenartikel]
Ultrafast Laser Helical Drilling of Three-Dimensional Shaped Holes using Synchronized Adaption of Energy Deposition
In: Journal of Laser Micro/Nanoengineering, 13 (1), 31-35, 2018
[DOI: 10.2961/jlmn.2018.01.0007]

He, Chao
Buehring, Jannik
Zibner, Frank
Gillner, Arnold

[Buchbeitrag, Fachzeitschriftenartikel]
Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
In: Manufacturing letters, 15 (Part B), 147-150, 2018
[DOI: 10.1016/j.mfglet.2018.01.002]

Koeppe, Arnd Hendrik
Hernandez Padilla, Carlos Alberto
Voshage, Maximilian
Schleifenbaum, Johannes Henrich
Markert, Bernd

[Fachzeitschriftenartikel]
Design framework for model-based self-optimizing manufacturing systems
In: The international journal of advanced manufacturing technology, 97 (1/4), 519-528, 2018
[DOI: 10.1007/s00170-018-1951-8]

Thombansen, Ulrich
Buchholz, Guido
Frank, Daniel
Heinisch, Julian
Kemper, Maximilian
et al.

[Fachzeitschriftenartikel]
Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants
In: Journal of materials processing technology, 258, 128-137, 2018
[DOI: 10.1016/j.jmatprotec.2018.03.007]

Wen, Peng
Jauer, Lucas
Voshage, Maximilian
Chen, Yanzhe
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
Einfluss des Handpolierens von Probenkörpern auf Gestaltabweichungen erster Ordnung und das Verschleißverhalten in Tribometerversuchen
In: Dry metal forming open access journal, 4, 31-34, 2018

Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Küpper, Moritz
Temmler, André
et al.

[Buch]
Tailored Light 1 : High Power Lasers for Production, XI, 260 Seiten, 2018
[DOI: 10.1007/978-3-642-01234-1]

Poprawe, Reinhart
Boucke, Konstantin
Hoffman, Dieter

[Fachzeitschriftenartikel]
Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel
In: Materials and design, 145, 205-217, 2018
[DOI: 10.1016/j.matdes.2018.02.062]

Köhnen, Patrick
Haase, Christian
Bültmann, Jan
Ziegler, Stephan
Schleifenbaum, Johannes Henrich
et al.

[Abstract, Beitrag zu einem Tagungsband]
Automated Laser Processing of Carbon Fiber Preforms
In: List of Poster-Abstracts : Symposium for „Tailored Carbon Fibers and Composites 2018”, K9, 4-4, 2018

Oppitz, Sebastian
Janssen, Stefan
Gries, Thomas Gerhard

[Fachzeitschriftenartikel]
Depositing laser-generated nanoparticles on powders for additive manufacturing of oxide dispersed strengthened alloy parts via laser metal deposition
In: Japanese journal of applied physics : JJAP, 57 (4), 040310, 2018
[DOI: 10.7567/JJAP.57.040310]

Streubel, René
Wilms, Markus
Doñate-Buendía, Carlos
Weisheit, Andreas
Barcikowski, Stephan
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Microstructures, tensile properties, and fracture mechanisms of Inconel 718 formed by HDR-LMD with PREP and GA powders
In: The international journal of advanced manufacturing technology, 96 (5/8), 2031-2041, 2018
[DOI: 10.1007/s00170-018-1662-1]

Zhong, Chongliang
Chen, Jing
Gasser, Andres
Sui, Shang
Schleifenbaum, Johannes Henrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
Automated and model-based assembly of an anamorphic telescope
In: Optical Interconnects XVIII : 29-31 January 2018, San Francisco, California, United States / Henning Schröder, Ray T. Chen, Editors, 10 Seiten, 2018
[DOI: 10.1117/12.2291910]

Holters, Martin
Dirks, Sebastian
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Coaxial beam shaping for Laser materials processing
In: Laser + photonics, 2018 (1), 10-14, 2018

Pütsch, Oliver
Kelbassa, Jana
Stollenwerk, Jochen Hugo
Gasser, Andres
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Multi-physical modeling of thermal and dispersive effects in optical systems for high power ultra-short laser pulses
In: High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VII : 31 January - 1 February 2018, San Francisco, California, United States / Stefan Kaierle, Stefan W. Heinemann (editors) ; sponsored and published by: SPIE, 1052504, 2018
[DOI: 10.1117/12.2288190]

Bonhoff, Tobias
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Measurement methods to build up the digital optical twin
In: Components and Packaging for Laser Systems IV : [Proceedings] - SPIE, 2018. - ISBN 97815106151139781510615120 - doi:10.1117/12.2290002, 105131I, 2018
[DOI: 10.1117/12.2290002]

Prochnau, Marcel Sebastian
Holzbrink, Michael
Wang, Wenxin
Holters, Martin
Stollenwerk, Jochen Hugo
et al.

[Fachzeitschriftenartikel]
Heat treatment of laser metal deposited TiAl TNM alloy
In: Intermetallics, 95, 94-101, 2018
[DOI: 10.1016/j.intermet.2018.02.002]

Rittinghaus, Silja-Katharina
Hecht, Ulrike
Werner, Valérie
Weisheit, Andreas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Tailored irradiation by VCSEL for controlled thermal states in thermoplastic tape placement
In: Laser 3D Manufacturing V : [Proceedings] -, 10523, 2018
[DOI: 10.1117/12.2291015]

Weiler, Thomas
Striet, Philipp
Völl, Annika
Stollenwerk, Jochen Hugo
Janssen, Henning
et al.

[Buch, Doktorarbeit]
Laser powder bed fusion of stainless steel with high power multi-diode-laser-array, III, 175 Seiten : Illustrationen, 2018

Eibl, Florian

[Doktorarbeit]
Extreme ultraviolet reflectometry for structural and optical characterization of thin films and layer systems, 1 Online-Ressource (vi, 106 Seiten) : Illustrationen, Diagramme, 2018

Tryus, Maksym

[Fachzeitschriftenartikel]
Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
In: Journal of alloys and compounds : JAL, 740, 389-399, 2017
[DOI: 10.1016/j.jallcom.2017.11.004]

Sui, Shang
Zhong, Chongliang
Chen, Jing
Gasser, Andres
Huang, Weidong
et al.

[Fachzeitschriftenartikel]
Influence of scan strategy and molten pool configuration on microstructures and tensile properties of selective laser melting additive manufactured aluminum based parts
In: Optics & laser technology, 99, 91-100, 2017
[DOI: 10.1016/j.optlastec.2017.08.015]

Dai, Donghua
Gu, Dongdong
Zhang, Han
Xiong, Jiapeng
Ma, Chenglong
et al.

[Abstract, Beitrag zu einem Tagungsband]
Microstructure and degradation of WE43 bone scaffolds fabricated by Selective Laser Melting
In: eCM Meeting Abstracts 2017, Collection 4: 9th Symposium on Biodegradable Metals : 27 August - 1 September, 2017, Bertinoro, Italy, 30-30, 2017

Berger, L.
Jauer, Lucas
Faue, E.
Bär, F.
Schäublin, R.
et al.

[Abstract, Beitrag zu einem Tagungsband]
Post-processing and plasma electolytic oxidation coating of additive manufactured magnesium scaffolds
In: eCM Meeting Abstracts 2017, Collection 4: 9th Symposium on Biodegradable Metals : 27 August - 1 September, 2017, Bertinoro, Italy, 13-13, 2017

Müther, Martin
Kopp, A.
Ptock, C.
Jauer, Lucas
Labude, Norina
et al.

[Abstract, Beitrag zu einem Tagungsband]
Additive manufacturing of magnesium alloys
In: eCM Meeting Abstracts 2017, Collection 4: 9th Symposium on Biodegradable Metals : 27 August - 1 September, 2017, Bertinoro, Italy, 10-10, 2017

Jauer, Lucas
Kimm, Martin
Meiners, Wilhelm
Santos Batista, Rui Joao
Labude, Norina
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Higher-order Bessel-like beams for optimized ultrafast processing of transparent materials
In: 2017 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO Europe-EQEC) : 25-29 June 2017 / publisher: IEEE ; [sponsored and organised by: European Physical Society, IEEE Photonics Society, OSA], 1 Seite, 2017
[DOI: 10.1109/CLEOE-EQEC.2017.8087233]

Flamm, Daniel
Bergner, Klaus
Grossmann, Daniel
Hellstern, Julian
Kleiner, Jonas
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Linking energy density with Morphology in laser grooving of sapphire
In: 2017 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO Europe-EQEC) : 25-29 June 2017 / publisher: IEEE ; [sponsored and organised by: European Physical Society, IEEE Photonics Society, OSA], 1 Seite, 2017
[DOI: 10.1109/CLEOE-EQEC.2017.8087283]

Sakurai, Haruyuki
He, Chao
Konishi, Kuniaki
Tamaru, Hiroharu
Yumoto, Junji
et al.

[Beitrag zu einem Tagungsband]
Design of Flexible Implants for Preservation of Physiological Mobility exploiting Additive Manufacturing
In: [17th Annual Meeting of the International Society for Computer Assisted Orthopaedic Surgery, CAOS 2017, 2017-06-14 - 2017-06-17, Aachen, Deutschland / Klaus Radermacher and Ferdinando Rodriguez Y Baena (editors)], 70-73, 2017

Kimm, Martin
Jauer, Lucas
Hinke, Christian
Schleifenbaum, Johannes Henrich
Poprawe, Reinhart

[Buch, Doktorarbeit]
Polygonscannerbasierte Hochleistungs-Ultrakurzpuls-Laserstrukturierung, 1 Online-Ressource (X, 145 Seiten) : Illustrationen, Diagramme, 2017

Nottrodt, Oliver

[Buchbeitrag, Beitrag zu einem Tagungsband]
Relevance of Modeling Laser-Material Interactions in the Industrial Context
In: 2017 Conference on Lasers and Electro-Optics (CLEO) : proceedings : San Jose, California, USA, 14-19 May 2017 / IEEE; [sponsored by APS Physics, IEEE Photonics Society, the Optical Society], 2017
[DOI: 10.1364/CLEO_AT.2017.ATu4C.1]

Schulz, Wolfgang

[Buch, Doktorarbeit]
Lasermikropolieren von Metallen, 1 Online-Ressource (III, 199, A-19 Seiten) : Illustrationen, 2017

Nüsser, Christian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Beam sources for metal additive manufacturing : Status quo and requirements
In: Proceedings of the 2017 High Power Diode Lasers and Systems Conference (HDP) : co-located with Photonex 2017, Ricoh Arena, Coventry, United Kingdom, 11th and 12th October 2017 / IEEE ; organised by the Scottish Chapter of the IEEE Photonics Society ; conference sponsor: IEEE Photonics Society, 5-6, 2017
[DOI: 10.1109/HPD.2017.8261077]

Hinke, Christian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Alternative beam sources and machine concepts for laser powder bed fusion
In: Proceedings of the 2017 High Power Diode Lasers and Systems Conference (HDP) : co-located with Photonex 2017, Ricoh Arena, Coventry, United Kingdom, 11th and 12th October 2017 / IEEE ; organised by the Scottish Chapter of the IEEE Photonics Society ; conference sponsor: IEEE Photonics Society, 7-8, 2017
[DOI: 10.1109/HPD.2017.8261078]

Eibl, Florian
Tenbrock, Christian
Pichler, Tobias
Schmithusen, Tobias
Heussen, D.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Advanced data enrichment and data analysis in manufacturing industry by an example of laser drilling processon
In: Challenges for a data-driven society : proceedings of the 2017 ITU Kaleidoscope Academic Conference : Nanjing, China, 27-29 November 2017 / technically co-sponsored by IEEE, IEEE Communications Society, SIIT 2017 ; organized by ITU, 1-5, 2017
[DOI: 10.23919/ITU-WT.2017.8246990]

Wang, You
Tercan, Hasan
Thiele, Thomas David
Meisen, Tobias
Jeschke, Sabina
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison of different methods for robustness estimation of simple lens systems
In: International Optical Design Conference 2017 : 9-13 July 2017, Denver, Colorado, United States / Peter P. Clark, Julius A. Muschaweck, Richard N. Pfisterer, John R. Rogers, editors ; organized by the Optical Society ; technical cosponsor: SPIE ; sponsored by Photon Engineering, LLC (United States) [und 5 weitere], 10590 0E, 2017
[DOI: 10.1117/12.2287568]

König, Hans-Georg
Chen, Chia-Wei
Holters, Martin
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag]
Virtual Production Intelligence (VPI)
In: Integrative production technology : theory and applications / ed. Christian Brecher, Denis Özdemir, 177-251, 2017
[DOI: 10.1007/978-3-319-47452-6_4]

Jeschke, Sabina
Kampker, Achim
Kuhlen, Torsten
Schuh, Günther
Schulz, Wolfgang
et al.

[Buchbeitrag]
Direct, Mold-Less Production Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 23-111, 2017
[DOI: 10.1007/978-3-319-47452-6_2]

Poprawe, Reinhart
Bleck, Wolfgang
Piller, Frank Thomas
Schuh, Günther
Barg, Sebastian Julian
et al.

[Buchbeitrag]
Manufacture of Plastic Components with Optical Microstructures
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 544-588, 2017

Berens, Michael
Naderi, Mona
Petzinka, Florian
Röbig, Malte
Steger, Michael

[Fachzeitschriftenartikel]
Surface Topography Guides Morphology and Spatial Patterning of Induced Pluripotent Stem Cell Colonies
In: Stem cell reports, 9 (2), 654-666, 2017
[DOI: 10.1016/j.stemcr.2017.06.016]

Abagnale, Giulio
Sechi, Antonio Salvatore
Steger, Michael
Zhou, Qihui
Kuo, Chao-Chung
et al.

[Buch, Doktorarbeit]
Transversale Moden in optischen Resonatoren für Anwendungen hoher Laserintensität, 1 Online-Ressource (ii, 234 Seiten) : Illustrationen, Diagramme, 2017

Weitenberg, Johannes

[Fachzeitschriftenartikel]
Hybrid simulation of laser deep penetration welding
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1290-1297, 2017
[DOI: 10.1002/mawe.201700164]

Schöler, Christoph
Häusler, André
Karyofylli, Violeta
Behr, Marek
Schulz, Wolfgang

[Fachzeitschriftenartikel]
Characterisation of quasi-stationary temperature fields in laser welding by infrared thermography
In: Materials science and engineering technology = Materialwissenschaft und Werkstofftechnik, 48 (12), 1283-1289, 2017
[DOI: 10.1002/mawe.201700160]

Francis, J. A.
Gach, Stefan
Olschok, Simon
Reisgen, Uwe
Häusler, André
et al.

[Fachzeitschriftenartikel]
Modelling approach towards tailored grain structure in laser processing
In: Materialwissenschaft und Werkstofftechnik = Materialwissenschaft und Werkstofftechnik, 48 (12), 1226-1234, 2017
[DOI: 10.1002/mawe.201700150]

Pustal, Björn
Vossel, Thomas
Bührig-Polaczek, Andreas
Arntz, Dennis
Häusler, André
et al.

[Fachzeitschriftenartikel]
Influence of process strategy on distortion and residual stresses for the powder based laser metal deposition process
In: Materialwissenschaft und Werkstofftechnik = Materialwissenschaft und Werkstofftechnik, 48 (12), 1304-1313, 2017
[DOI: 10.1002/mawe.201700169]

Pirch, Nobert
Schleifenbaum, Henrich
Linnenbrink, Stefanie
Gasser, Andres
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
An automatable algorithm for measurement of fluid flow during laser fusion cutting using in-situ trim cut analysis
In: Materialwissenschaft und Werkstofftechnik = Materialwissenschaft und Werkstofftechnik, 48 (12), 1298-1303, 2017
[DOI: 10.1002/mawe.201700168]

Jansen, Ulrich
Arntz, Dennis
Petrink, Dirk
Schulz, Wolfgang

[Buch, Doktorarbeit]
Bauteilschonende Verbindungstechnik auf Metallisierungen durch moduliertes Laserstrahlschweißen, 1 Online-Ressource (VIII, 143 Seiten) : Illustrationen, Diagramme, 2017

Britten, Simon

[Buchbeitrag, Beitrag zu einem Tagungsband]
Boundary Layer Approximation for Melt Film Dynamics in Laser Fusion Cutting
In: [22nd International Congress on Modelling and Simulation, MODSIM 0217, 2017-12-03 - 2017-12-08, Hobart, Australia], 326-332, 2017

Jansen, Ulrich
Niessen, Markus
Hermanns, Torsten
Arntz, Dennis
Poprawe, Reinhart
et al.

[Doktorarbeit]
Elementspezifische Analyse primärverzunderter Stranggussstähle mit Laser-Emissionsspektroskopie : Element-specific analysis of scaled continuous casted steel by laser-induced breakdown spectroscopy, V, 181 Seiten : Illustrationen, Diagramme, 2017

Meinhardt, Christoph

[Buchbeitrag, Beitrag zu einem Tagungsband]
Multiphysikalische Analyse von optischen Systemen für die Lasermaterialbearbeitung
In: [35. CADFEM ANSYS Simulation Conference, CADFEM ANSYS, 2017-10-15 - 2017-10-17, Koblenz, Germany], 2017

Bonhoff, Tobias
Schniedenharn, Maximilian
Nippgen, Sebastian
Thombansen, Ulrich
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Residual stress reduction in carbon manganese steels using low-transformation-temperature (LTT) filler materials - in situ diagnostics with digital image correlation
In: [The 36th International Congress on Applications of Lasers & Electro-Optics, ICALEO 2017, 2017-10-22 - 2017-10-26, Atlanta, GA, USA], 1001, 9 Seiten, 2017

Gach, Stefan
Arntz, Dennis
Olschok, Simon
Reisgen, Uwe

[Fachzeitschriftenartikel]
Ptychographic imaging with partially coherent plasma EUV sources
In: Advanced Optical Technologies, 6 (6), 459-466, 2017
[DOI: 10.1515/aot-2017-0050]

Biller, Jan
Odstrčil, Michal
Teramoto, Yusuke
Juschkin, Larissa

[Fachzeitschriftenartikel]
Red mud as secondary source for critical raw materials - extraction study
In: Journal of chemical technology & biotechnology, 92 (11), 2835-2844, 2017
[DOI: 10.1002/jctb.5300]

Ujaczki, Éva
Zimmermann, Yannick-Serge
Gasser, Christoph A.
Molnár, Mónika
Feigl, Viktória
et al.

[Doktorarbeit]
Interface phenomena in La$_{1/3}$Sr$_{2/3}$FeO$_3$ / La$_{2/3}$Sr$_{1/3}$MnO$_3$ heterostructures and a quest for p-electron magnetism, 1 Online-Ressource (ix, 205 Seiten) : Illustrationen, Diagramme, 2017

Waschk, Markus

[Buchbeitrag, Beitrag zu einem Tagungsband]
Synthetic Mono-Crystalline Diamond Lenses for High Power Laser Materials Processing Applications
In: International Optical Design Conference : part of Optical Design and Fabrication : 9-13 July 2017, Denver, Colorado, United States / OSA - The Optical Society, OTu3B.3, 2017
[DOI: 10.1364/OFT.2017.OTu3B.3]

Traub, Martin
Holly, Carlo
Hoffmann, Dieter
Widmann, Claudia J.
Zuerbig, Verena
et al.

[Fachzeitschriftenartikel]
Enhanced replication ratio of injection molded plastic parts by using an innovative combination of laser-structuring and PVD coating
In: Surface and coatings technology, 332, 474-483, 2017
[DOI: 10.1016/j.surfcoat.2017.09.068]

Bobzin, Kirsten
Hopmann, Christian
Gillner, Arnold
Brögelmann, Tobias
Kruppe, Nathan
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser-based process for polymeric tribological coatings on lightweight components
In: Surface and coatings technology, 332, 391-398, 2017
[DOI: 10.1016/j.surfcoat.2017.06.075]

Sändker, Hendrik
Stollenwerk, Jochen Hugo
Loosen, Peter

[Konferenzbeitrag]
In-situ-visualization of multiple reflections on the cut flank during laser cutting with 1 micron wavelength
In: International Congress on Applications & electro-optics Atlanta, Georgia 2017-10-22 - 2017-10-26, paper 603, 2017

Arntz, Dennis
Petring, Dirk
Stoyanov, Stoyan
Jansen, Ulrich
Schneider, Frank
et al.

[Konferenzbeitrag]
Temperature field and residual stress distribution for laser metal deposition
In: International Congress on Applications & electro-optics Atlanta, Georgia 2017-10-22 - 2017-10-26, paper 1204, 2017

Pirch, Nobert
Niessen, Markus
Linnenbrink, Stefanie
Schopphoven, Thomas
Gasser, Andres
et al.

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
The influence of laser-induced-forward transfer on cell viability and growth
In: Biomedizinische Technik, 62 (s2), S03-04, 2017

Nottrodt, Nadine
Hildmann, T.
Lensing, Richard
Wehner, Martin

[Buchbeitrag, Beitrag zu einem Tagungsband]
Tribological investigations of the applicability of surface functionalization for dry extrusion processes
In: Proceedings of the 20th International ESAFORM Conference on Material Forming : ESAFORM 2017 : Dublin, Ireland, 26-28 April 2017 / editors: Dermot Brabazon, Sumsun Naher, Inam Ul Ahad. - B, 140001, 1-6, 2017
[DOI: 10.1063/1.5008157]

Teller, Marco
Prünte, Stephan
Ross, Ingo
Temmler, André
Schneider, Jochen Michael
et al.

[Fachzeitschriftenartikel]
In-situ microscopy of front and rear side ablation processes in alkali aluminosilicate glass using ultra short pulsed laser radiation
In: Optics express, 25 (23), 28478-28488, 2017
[DOI: 10.1364/OE.25.028478]

Grossmann, Daniel
Reininghaus, Martin
Kalupka, Christian
Jenne, Michael
Kumkar, Malte

[Fachzeitschriftenartikel]
Kostenmodell für das Laserstrahlschmelzen: Kosten- und Leistungskennwerte für die additive Fertigung ermitteln und analysieren
In: wt Werkstattstechnik online, 107 (6), 432-435, 2017

Schleifenbaum, Henrich
Pichler, Tobias
Hoppe, Birk

[Fachzeitschriftenartikel]
Numerical and Experimental Study of Ti6Al4V Components Manufactured Using Powder Bed Fusion Additive Manufacturing
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 69 (12), 2711-2718, 2017
[DOI: 10.1007/s11837-017-2596-z]

Zielinski, Jonas
Mindt, Hans-Wilfried
Düchting, Jan
Schleifenbaum, Henrich
Megahed, Mustafa

[Fachzeitschriftenartikel]
Design of structured YAG:Ce scintillators with enhanced outcoupling for image detection in the extreme ultraviolet
In: Optics letters, 42 (19), 3848-3851, 2017
[DOI: 10.1364/OL.42.003848]

Bahrenberg, Lukas
Herbert, Stefan
Mathmann, Tobias
Danylyuk, Serhiy
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison of Different Methods for Robustness Estimation in Simple Lens Systems
In: Optical Fabrication and Testing : part of Optical Design and Fabrication : 9-13 July 2017, Denver, Colorado, United States / OSA - The Optical Society, IM3A.6, 2017
[DOI: 10.1364/IODC.2017.IM3A.6]

König, Hans-Georg
Chen, Chia-Wei
Holters, Martin
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
A New Laser-Processing Strategy for Improving Enamel Erosion Resistance
In: Journal of dental research : JDR, 96 (10), 1168-1175, 2017
[DOI: 10.1177/0022034517718532]

Esteves Oliveira, Marcella
Wollgarten, Susanne
Liebegall, S.
Jansen, Patrick
Bilandzic, Marin Dean
et al.

[Fachzeitschriftenartikel]
The Influence of the Powder Stream on High-Deposition-Rate Laser Metal Deposition with Inconel 718
In: Metals : open access journal, 7 (10), 443, 2017
[DOI: 10.3390/met7100443]

Zhong, Chongliang
Pirch, Norbert
Gasser, Andres
Poprawe, Reinhart
Schleifenbaum, Johannes

[Buchbeitrag, Beitrag zu einem Tagungsband]
High-power optical parametric frequency converters with addressable wavelengths in the infrared
In: Solid State Lasers XXVI: Technology and Devices : 30 January - 2 February 2017, San Francisco, California, United States / Ramesh K. Shori, W. Andrew Clarkson, Editors, 6 Seiten, 2017
[DOI: 10.1117/12.2250942]

Jungbluth, Bernd
Elsen, F.
Wueppen, J.
Nyga, S.
Strotkamp, M.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Characterization of pellicle membranes by lab-based spectroscopic reflectance and transmittance measurements in the extreme ultraviolet
In: [International Conference on Extreme Ultraviolet Lithography, 2017-09-11 - 2017-09-14, Monterey, California, USA], 2017
[DOI: 10.1117/12.2280579]

Bahrenberg, Lukas
Danylyuk, Serhiy
Brose, Sascha
Pollentier, Ivan
Timmermans, Marina
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Optimized phase-shifting masks for high-resolution resist patterning by interference lithography
In: [International Conference on Extreme Ultraviolet Lithography, 2017-09-11 - 2017-09-14, Monterey, California, USA], 104502A, 2017
[DOI: 10.1117/12.2280582]

Brose, Sascha
Danylyuk, Serhiy
Bahrenberg, Lukas
Lebert, Rainer
Loosen, Peter
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Meta-modelling, visualization and emulation of multi-dimensional data for virtual production intelligence
In: International Conference on Numerical Analysis and Applied Mathematics (ICNAAM 2016) : Rhodes, Greece, 19-25 September 2016 / editors: Theodore Simos, Charalambos Tsitouras; sponsoring organizations: European Society of Computational Methods in Sciences and Engineering (ESCMSE), 440003, 2017
[DOI: 10.1063/1.4992607]

Schulz, Wolfgang
Hermanns, Torsten
Al Khawli, Toufik

[Buchbeitrag, Beitrag zu einem Tagungsband]
Towards crack-free ablation cutting of thin glass sheets with picosecond pulsed lasers
In: Pacific Rim Laser Damage 2017-Optical Materials for High Power Lasers, 103390O, 2017
[DOI: 10.1117/12.2272120]

Sun, Mingying
Eppelt, Urs
Hartmann, Claudia
Schulz, Wolfgang
Zhu, Jianqiang
et al.

[Buch, Doktorarbeit]
Puls-zu-Puls-Wechselwirkungen beim Ultrakurzpuls-Laserabtrag mit hohen Repetitionsraten, 1 Online-Ressource (ii, 153 Seiten) : Illustrationen, Diagramme, 2017

Finger, Johannes-Thomas
Poprapwe, Reinhart
Ostendorf, Andreas

[Doktorarbeit]
Realisierung eines hochauflösenden EUV-Mikroskops mit einer optimierten Gasentladungsquelle zum Betrieb mit Wellenlängen um 17 nm zur Mikroskopie an M-Kanten von Elementen, 193 Blätter : Illustrationen, Diagramme, 2017

Freiberger, Ralf

[Doktorarbeit]
Studies on laser-triggered discharge plasmas as extreme ultraviolet light sources, 1 Online-Ressource (xxii, 223 Seiten) : Illustrationen, Diagramme, 2017

Beyene, Girum A.

[Buch, Doktorarbeit]
Korrelation der High Power SLM-Prozessführung mit der Produktivität, Effizienz und den Materialeigenschaften für den Werkstoff Inconel 718, III, 187 Seiten : Illustrationen, Diagramme, 2017

Bremen, Sebastian Wilhelm

[Fachzeitschriftenartikel]
On the interplay of morphology and electronic conductivity of rotationally spun carbon fiber mats
In: Journal of applied physics, 122 (10), 105104, 2017
[DOI: 10.1063/1.5001509]

Opitz, Martin
Go, Dennis
Lott, Philipp
Müller, Sandra
Stollenwerk, Jochen Hugo
et al.

[Fachzeitschriftenartikel]
Fast identification of steel bloom composition at a rolling mill by laser-induced breakdown spectroscopy
In: Spectrochimica acta / B, 136, 66-72, 2017
[DOI: 10.1016/j.sab.2017.08.009]

Sturm, Volker
Meinhardt, Christoph
Fleige, Rüdiger
Fricke-Begemann, Cord
Eisbach, Jens

[Fachzeitschriftenartikel]
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing
In: Metals : open access journal, 7 (4), 113, 2017
[DOI: 10.3390/met7040113]

Bambach, Markus
Sviridov, Alexander
Weisheit, Andreas
Schleifenbaum, Henrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
kW-class direct diode laser for sheet metal cutting based on commercial pump modules
In: High-Power Diode Laser Technology XV, 1008608, 2017
[DOI: 10.1117/12.2252145]

Witte, Ulrich
Schneider, F.
Holly, Carlo
Di Meo, Angelo
Rubel, D.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Ermittlung der Montagereihenfolge für Präzisionsoptiken
In: [118. Jahrestagung der DGaO, 2017-06-06 - 2017-06-10, Dresden, Germany], B 31, 2 Seiten, 2017

Holters, Martin
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation
In: Journal of laser applications, 29 (2), 022422, 2017
[DOI: 10.2351/1.4983505]

Häusler, A.
Schurmann, Annette
Schöler, C.
Olowinsky, Alexander
Gillner, Arnold
et al.

[Fachzeitschriftenartikel]
Glass-ceramic coating material for the CO2 laser based sintering of thin films as caries and erosion protection
In: Dental materials, 33 (9), 995-1003, 2017
[DOI: 10.1016/j.dental.2017.06.008]

Bilandzic, Marin Dean
Wollgarten, Susanne
Stollenwerk, Jochen
Poprawe, Reinhart
Esteves Oliveira, Marcella
et al.

[Fachzeitschriftenartikel]
Growing of bulk sapphire single crystals using laser material deposition
In: Journal of laser applications, 29 (2), 022013, 2017
[DOI: 10.2351/1.4983638]

Wilms, M. B.
Biermann, Tim
Rolink, Gesa
Weisheit, Andreas
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Throughput scaling by spatial beam shaping and dynamic focusing
In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII / edited by Beat Neuenschwander, UNSP 100910G, 2017
[DOI: 10.1117/12.2256228]

Kumkar, M.
Kaiser, M.
Kleiner, J.
Flamm, D.
Grossmann, D.
et al.

[Fachzeitschriftenartikel]
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
In: Science bulletin, 62 (11), 779-787, 2017
[DOI: 10.1016/j.scib.2017.05.007]

Dai, Donghua
Gu, Dongdong
Poprawe, Reinhart
Xia, Mujian

[Fachzeitschriftenartikel]
Novel process for butt-joined plastic-metal hybrid compounds
In: Journal of laser applications, 29 (2), 022416, 2017
[DOI: 10.2351/1.4983516]

Engelmann, Christoph
Oster, Lukas
Olowinsky, Alexander
Gillner, Arnold
Mamuschkin, Viktor
et al.

[Beitrag zu einem Tagungsband]
Rapid nanostructuring using multi-beam-interference with consecutively overlapped ultrashort laser pulses
In: [18th International Syposium on Laser Precision Microfabrication, LPM 2017, 2017-06-05 - 2017-06-08, Toyama, Japan], 4 Seiten, 2017

He, Chao
Steger, Michael
Gillner, Arnold

[Beitrag zu einem Tagungsband]
Ultrafast laser helical drilling of three-dimensional shaped holes using sychronized adaptation of energy deposition
In: [18th International Syposium on Laser Precision Microfabrication, LPM 2017, 2017-06-05 - 2017-06-08, Toyama, Japan], 5 Seiten, 2017

He, Chao
Bühring, Jan
Zibner, Frank
Gillner, Arnold

[Buchbeitrag, Beitrag zu einem Tagungsband]
Approach towards the Digital Optical Twin
In: Optical Fabrication and Testing : part of Optical Design and Fabrication : 9-13 July 2017, Denver, Colorado, United States / OSA - The Optical Society, paper ITh3A.1 (2 S.), 2017
[DOI: 10.1117/12.2287492]

Prochnau, Marcel Sebastian
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag]
Multi-technology products
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 515-627, 2017
[DOI: 10.1007/978-3-319-47452-6_7]

Bobzin, Kirsten
Hopmann, Christian
Loosen, Peter
Poprawe, Reinhart
Öte, Mehmet
et al.

[Fachzeitschriftenartikel]
Analysis of track formation during laser metal deposition
In: Journal of laser applications, 29 (2), 022506, 2017
[DOI: 10.2351/1.4983231]

Pirch, N.
Linnenbrink, S.
Gasser, Andres
Wissenbach, K.
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Koaxiale Laserstrahlformung für die Lasermaterial-Bearbeitung mit Zusatzwerkstoff
In: Photonik, 2017 (3), 80-83, 2017

Pütsch, Oliver
Kelbassa, Jana
Stollenwerk, Jochen Hugo
Gasser, Andres
Loosen, Peter

[Fachzeitschriftenartikel]
Laser-based functionalization of electronic multi-material-layers for embedded sensors
In: Journal of laser applications : JLA, 29 (2), 022603, 2017
[DOI: 10.2351/1.4983267]

Vedder, Christian
Wollgarten, Susanne
Gradmann, Rena
Stollenwerk, Jochen
Wissenbach, Konrad
et al.

[Fachzeitschriftenartikel]
Advanced trim-cut technique to visualize melt flow dynamics inside laser cutting kerfs
In: Journal of laser applications : JLA, 29 (2), 022213, 2017
[DOI: 10.2351/1.4983261]

Arntz, Dennis
Petring, Dirk
Jansen, Ulrich
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Integrated optical design for highly dynamic laser beam shaping with membrane deformable mirrors
In: Laser Resonators, Microresonators, and Beam Control XIX : 30 January-2 February 2017, San Francisco, California, United States / Alexis V. Kudryashov, Alan H. Paxton, Vladimir S. Ilchenko (editors) ; sponsored and published by SPIE, 1009010 (8 S.), 2017
[DOI: 10.1117/12.2256127]

Pütsch, Oliver
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Glass processing with pulsed CO_2 laser radiation
In: Applied optics, 56 (4), 777-783, 2017
[DOI: 10.1364/AO.56.000777]

Weingarten, Christian
Uluz, Emrah
Schmickler, Andreas
Braun, Karsten
Willenborg, Edgar
et al.

[Fachzeitschriftenartikel]
Evolution of energy deposition during glass cutting with pulsed femtosecond laser radiation
In: Applied physics / A, 123 (5), 376, 2017
[DOI: 10.1007/s00339-017-1000-8]

Kalupka, Christian
Grossmann, Daniel
Reininghaus, Martin

[Doktorarbeit]
Kohärente Beugungsmikroskopie mit Laborlichtquellen, 1 Online-Ressource (xx, 210 Seiten) : Illustrationen, Diagramme, 2017

Odstrčil, Michal

[Buchbeitrag]
Self-optimizing Production Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, Part IV, 629-643, 2017

Schlick, Christopher
Schuh, Günther
Klocke, Fritz
Schmitt, Robert Heinrich
Abel, Dirk
et al.

[Buchbeitrag]
Self-optimizing Production Technologies
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 745-875, 2017
[DOI: 10.1007/978-3-319-47452-6_9]

Klocke, Fritz
Abel, Dirk
Gries, Thomas
Hopmann, Christian
Loosen, Peter
et al.

[Fachzeitschriftenartikel]
Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
In: Dry metal forming open access journal, 3, 073-080, 2017

Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Temmler, André
Poprawe, Reinhart
et al.

[Doktorarbeit]
Laserinduzierte Ablation von biologischem Hartgewebe unter Wasser mit Pikosekundenpulsen im sichtbaren Spektralbereich, iv, 139 Seiten : Illustrationen, Diagramme, 2017

Tulea, Cristian-Alexander

[Fachzeitschriftenartikel]
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
In: Materials science and engineering / A, 688, 180-189, 2017
[DOI: 10.1016/j.msea.2017.01.099]

Haase, Christian
Tang, Florian
Wilms, Markus B.
Weisheit, Andreas
Hallstedt, Bengt

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser Beam Microwelding of Lithium-ion Battery Cells with Copper Connectors for Electrical Connections in Energy Storage Devices
In: Lasers in engineering : LIE, 36 (1/3), 147-167, 2017

Heinen, Paul
Häusler, André
Mehlmann, B.
Olowinsky, A.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Efficient Copper Microwelding with Fibre Lasers using Spatial Power Modulation
In: Lasers in engineering : LIE, 36 (1/3), 133-146, 2017

Häusler, André
Mehlmann, B.
Olowinsky, A.
Gillner, Arnold
Poprawe, Reinhart

[Buchbeitrag, Fachzeitschriftenartikel]
Improving the laser cutting process design by machine learning techniques
In: Production engineering, 11 (2), 195-203, 2017
[DOI: 10.1007/s11740-017-0718-7]

Tercan, Hasan
Al Khawli, Toufik
Eppelt, Urs
Büscher, Christian
Meisen, Tobias
et al.

[Fachzeitschriftenartikel]
Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy
In: Materials and design, 117, 363-370, 2016
[DOI: 10.1016/j.matdes.2016.12.007]

Li, Jianing
Craeghs, Werner
Jing, Cainian
Gong, Shuili
Shan, Feihu

[Fachzeitschriftenartikel]
Laser polishing and laser shape correction of optical glass
In: Journal of laser applications : JLA, 29 (1), 011702, 2017
[DOI: 10.2351/1.4974905]

Weingarten, Christian
Schmickler, Andreas
Willenborg, Edgar
Wissenbach, Konrad
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Surface structuring by laser remelting of metals
In: Journal of laser applications : JLA, 29 (1), UNSP 012015, 2017
[DOI: 10.2351/1.4972414]

Temmler, André
Küpper, M.
Walochnik, Martin A.
Lanfermann, A.
Schmickler, T.
et al.

[Buchbeitrag]
Scientific Cooperation Engineering
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 993-1046, 2017
[DOI: 10.1007/978-3-319-47452-6_11]

Jeschke, Sabina
Bleck, Wolfgang
Richert, Anja Simone
Schuh, Günther
Schulz, Wolfgang
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
In: Materials, 10 (1), 8, 2016
[DOI: 10.3390/ma10010008]

Jägle, Eric A.
Sheng, Zhendong
Kürnsteiner, Philipp
Ocylok, Sörn
Weisheit, Andreas
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
In: Materials, 10 (1), 56, 2017
[DOI: 10.3390/ma10010056]

Haase, Christian
Bültmann, Jan
Hof, Jan
Ziegler, Stephan
Bremen, Sebastian
et al.

[Fachzeitschriftenartikel]
A Rapid Laser Probing Method Facilitates the Non-invasive and Contact-free Determination of Leaf Thermal Properties
In: Journal of visualized experiments : JoVE, 119, e54835, 2017
[DOI: 10.3791/54835]

Buyel, Johannes Felix
Gruchow, Hannah
Wehner, Martin

[Buchbeitrag]
Additive Fertigung "Vom Pulver zum Fertigteil"
In: Ressourceneffizienz : Schlüsseltechnologien für Wirtschaft und Gesellschaft / Reimund Neugebauer, 151-152, 2017

Alkhayat, Moritz
Gasser, Andres
Arntz, Kristian
Klingbeil, Nils
Vollmer, Thomas

[Fachzeitschriftenartikel]
Surface Characterization and Short-term Adhesion to Zirconia after Ultra-short Pulsed Laser Irradiation
In: The journal of adhesive dentistry, 18 (6), 1-10, 2016
[DOI: 10.3290/j.jad.a36918]

Esteves Oliveira, Marcella
Jansen, Patrick
Wehner, Martin
Dohrn, Andreas
Silva, Marina Stella Bello
et al.

[Abstract]
Microstructure and properties of WE43 manufactured via SLM
In: Symposium on Biodegradable Metals for biomedical Applications Montreal 2016-05-14 - 2016-05-17, 2016

Zumdick, Naemi Aimee
Jauer, L.
Kersting, L. C.
Meiners, W.
Kutz, Tatiana
et al.

[Fachzeitschriftenartikel]
High Speed Photography of Laser Induced Forward Transfer (LIFT) of Single and Double-layered Transfer Layers for Single Cell Transfer
In: Journal of Laser Micro/Nanoengineering, 11 (2), 199-203, 2016
[DOI: 10.2961/jlmn.2016.02.0010]

Riester, Dominik
Budde, Jan-Hendrik
Gach, Christian
Gillner, Arnold
Wehner, Martin

[Buchbeitrag, Beitrag zu einem Tagungsband]
A fast method for automated calibration of heat sources
In: Mathematical modelling of weld phenomena 11 : contains the papers presented at the 11th International Seminar 'Numerical Analysis of Weldability', held from September 27 to 30, 2015 at Schloss Seggau near Graz, Austria / edited by Christof Sommitsch (Institute of Materials Science and Welding, Graz University of Technology), Norbert Enzinger (Institute of Materials Science and Welding, Graz University of Technology), Peter Mayr (Institute of Joining and Assembly, Technische Universität Chemnitz) ; TU Graz, Graz University of Technology, 595-612, 2016

Schöler, Christoph
Nießen, Markus
Jansen, Ulrich
Schulz, Wolfgang

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Microstructure and properties of WE43 manufactured via SLM
In: European cells & materials, 32 (Supplement 6), 6-6, 2016

Zumdick, Naemi Aimee
Jauer, L.
Kersting, L. C.
Meiners, W.
Kutz, Tatiana
et al.

[Doktorarbeit]
Digital photonic production of corundum components by SLE, 1 Online-Ressource (xv, 148 Seiten) : Illustrationen, Diagramme, 2016

Hörstmann-Jungemann, Maren

[Buch, Doktorarbeit]
Mehrstrahlinterferenz zur direkten, großflächigen Nanostrukturierung durch Laserablation, ii,145 Seiten : Illustrationen, Diagramme, 2016

Steger, Michael

[Buch, Doktorarbeit]
Entwicklung der laserbasierten additiven Fertigung für intermetallische Fe-Al-Legierungen, III, 160 Seiten : Illustrationen, Diagramme, 2016

Rolink, Gesa

[Doktorarbeit]
Interference lithography with extreme ultraviolet light, 1 Online-Ressource (149 Seiten) : Illustrationen, Diagramme, 2016

Kim, Hyun-su

[Buchbeitrag]
Cognition-Enhanced, Self-optimizing Assembly Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 877-984, 2016
[DOI: 10.1007/978-3-319-47452-6_10]

Schmitt, Robert Heinrich
Corves, Burkhard
Loosen, Peter
Brecher, Christian
Jeschke, Sabina
et al.

[Fachzeitschriftenartikel]
Abschätzung der umformtechnischen Grenzen des schmierstofffreien Kaltfließpressens von Aluminium anhand von Tribometerversuchen
In: Dry metal forming open access journal, 2, 56-61, 2016

Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Poprawe, Reinhart
Prünte, Stephan

[Fachzeitschriftenartikel]
Blood-Vessel Mimicking Structures by Stereolithographic Fabrication of Small Porous Tubes Using Cytocompatible Polyacrylate Elastomers, Biofunctionalization and Endothelialization
In: Journal of Functional Biomaterials, 7 (2), 11, 2016
[DOI: 10.3390/jfb7020011]

Huber, Birgit
Engelhardt, Sascha
Meyer, Wolfdietrich
Krüger, Hartmut
Wenz, Annika
et al.

[Fachzeitschriftenartikel]
Table-top EUV scatterometer MARYS with high-brightness discharge plasma source
In: JARA-FIT annual report, 2015, 149-150, 2016

Maryasov, O.
Juschkin, Larissa

[Fachzeitschriftenartikel]
Ptychographic imaging with a tin plasma based EUV light source
In: JARA-FIT annual report, 2015, 147-148, 2016

Bußmann, Jan
Odstrčil, M.
Bresenitz, R.
Teramoto, Y.
Juschkin, Larissa

[Buchbeitrag, Fachzeitschriftenartikel]
Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy
In: JARA-FIT annual report, 2015, 151-152, 2016

Wilson, D.
Schmitz, C.
Rudolf, D.
Wiemann, C.
Plucinski, L.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Selective Laser Melting of magnesium alloys
In: World PM2016 proceedings : Congress Centre Hamburg (CCH), Hamburg, Germany, 9-13 October 2016 / [organised and sponsored by EPMA, European Powder Metallurgy Association], 2016

Jauer, Lucas
Meiners, Wilhelm
Vervoort, Simon
Gayer, Christoph
Zumdick, Naemi Aimee
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Adaption of Functional Ceramic Materials for the Laser Sintering Process in Integrated Sensor Applications
In: Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT), 2016 (CICMT (May 2016)), 000011, 2016
[DOI: 10.4071/2016CICMT-TA14]

Gradmann, Rena
Seuthe, Thomas
Vedder, Christian
Eberstein, Markus
Partsch, Uwe

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser-based functionalization of electronic multi-material-layers for embedded sensors
In: [The 35th International Congress on Applications of Lasers & Electro-Optics, ICALEO, 2016-10-16 - 2016-10-20, San Diego, Ca., USA], 2104, 2016

Vedder, Christian
Wollgarten, Susanne
Gradmann, Rena
Stollenwerk, Jochen Hugo
Wissenbach, Konrad
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser-based drying of battery electrode layers
In: [The 35th International Congress on Applications of Lasers & Electro-Optics, ICALEO, 2016-10-16 - 2016-10-20, San Diego, Ca., USA], N501, 2016

Vedder, Christian
Hawelka, Dominik
Wolter, Mareike
Leiva, Diana
Stollenwerk, Jochen Hugo
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Observation of melting conditions in selective laser melting of metals (SLM)
In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V : 16-18 February 2016, San Francisco, California, United States / Friedhelm Dorsch, Stefan Kaierle, editors ; sponsored and published by SPIE, 9741 OS, 2016
[DOI: 10.1117/12.2213952]

Thombansen, Ulrich
Abels, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Novel process for Butt-joined plastic-metal hybrid compounds
In: 35th International Congress on Applications of Lasers & Electro-Optics (ICALEO® 2016) Congress Proceedings, 2016

Engelmann, Christoph
Oster, Lukas
Olowinsky, Alexander
Mamuschkin, Viktor
Arntz, Dennis

[Buchbeitrag, Beitrag zu einem Tagungsband]
Experimental and Simulative Investigations of Laser Assisted Plastic-metal-joints Considering Different Load Directions
In: Laser Assisted Net Shape Engineering : 9 International Conference on Photonic Technologies : Proceedings of the LANE 2016 September 19-22, 2016 Fürth, Germany / Edited by M. Schmidt, F. Vollertsen and C. B. Arnold, 1118-1129, 2016
[DOI: 10.1016/j.phpro.2016.08.117]

Engelmann, Christoph
Eckstaedt, Johannes
Olowinsky, Alexander
Aden, Mirko
Mamuschkin, Viktor

[Buchbeitrag, Beitrag zu einem Tagungsband]
Monocrystalline CVD-diamond optics for high-power laser applications
In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V : 16-18 February 2016, San Francisco, California, United States / Friedhelm Dorsch, Stefan Kaierle, editors ; sponsored and published by SPIE, 974104, 2016
[DOI: 10.1117/12.2213601]

Holly, Carlo
Traub, M.
Hoffmann, D.
Widmann, C.
Brink, D.
et al.

[Buchbeitrag]
Modeling for Self-Optimization in Laser Cutting
In: Handbook of research on computational simulation and modeling in engineering / Francisco Miranda (Instituto Politécnico de Viana do Castelo and CIDMA of University of Averiro, Portugal), Carlos Abreu (Instituto Politécnico de Viana do Castelo, Portugal), 593-625, 2016
[DOI: 10.4018/978-1-4666-8823-0.ch019]

Hermanns, Torsten
Thombansen, Ulrich
Nießen, Markus
Jansen, Ulrich
Schulz, Wolfgang

[Fachzeitschriftenartikel]
Analysis and Evaluation of Boundary Conditions for Direct Surface Structuring by Multi-Beam Interference
In: Journal of Laser Micro/Nanoengineering, 11 (3), 296-303, 2016
[DOI: 10.2961/jlmn.2016.03.0003]

Steger, Michael
Gillner, Arnold

[Fachzeitschriftenartikel]
Disseminating results of RFCS supported research projects on EAF technology
In: Metallurgia italiana, 2016 (9), 49-57, 2016

Kleimt, Bernd
Köchner, Herbert
Di Donato, A.
De Santis, Michele
Fricke-Begemann, C.
et al.

[Fachzeitschriftenartikel]
Effect of various dispersing agents on the stability of silver microparticle dispersion and the formulation of uniform silver film by laser melting
In: Journal of laser applications : JLA, 28 (4), UNSP 042004, 2016
[DOI: 10.2351/1.4955011]

Letzel, Alexander
Maurer, Elisabeth
Meixner, Melanie
Poprawe, Reinhart
Stollenwerk, Jochen Hugo
et al.

[Doktorarbeit]
Breitband-Nahfeldmikroskopie an phonon-resonanten Kristallen, III, 166 Seiten : Illustrationen, Diagramme, 2016

Bensmann, Stefanie

[Fachzeitschriftenartikel]
E3-Produktion: Ultrakurze Prozessketten bewerten und verbessern
In: Zeitschrift für wirtschaftlichen Fabrikbetrieb : ZWF, 2016 (09), 527-530, 2016

Klocke, Fritz
Vollmer, Thomas
Klingbeil, Nils
Wegener, Maximilian
Alkhayat, Moritz
et al.

[Fachzeitschriftenartikel]
Achromatic Talbot lithography with partially coherent extreme ultraviolet radiation: process window analysis
In: Journal of micro/nanolithography, MEMS and MOEMS, 15 (4), 043502, 2016
[DOI: 10.1117/1.JMM.15.4.043502]

Brose, Sascha
Tempeler, Jenny
Danylyuk, Serhiy
Loosen, Peter
Juschkin, Larissa

[Fachzeitschriftenartikel]
A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
In: Materials and design, 107, 386-392, 2016
[DOI: 10.1016/j.matdes.2016.06.037]

Zhong, Chongliang
Chen, Jing
Linnenbrink, Stefanie
Gasser, Andres
Sui, Shang
et al.

[Fachzeitschriftenartikel]
Transverse pump-probe microscopy of moving breakdown, filamentation and self-organized absorption in alkali aluminosilicate glass using ultrashort pulse laser
In: Optics express, 24 (20), 23221-23231, 2016
[DOI: 10.1364/OE.24.023221]

Grossmann, Daniel
Reininghaus, Martin
Kalupka, Christian
Kumkar, Malte
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laserstrahlschweißen ultrahochfester Stähle - Stand und Perspektiven
In: DVS Congress 2016 : Große Schweißtechnische Tagung, DVS Studentenkongress : Vorträge der Veranstaltungen in Leipzig am 19. und 20. September 2016 / Veranstalter: DVS - Deutscher Verband für Schweißen und verwandte Verfahren e.V., Düsseldorf, 221-230, 2016

Dahmen, Martin
Janzen, Vitalij
Lindner, Stefan
Monfort, Damien
Wagener, Rainer

[Buchbeitrag, Beitrag zu einem Tagungsband]
Sensor-Based Sorting of Spent Refractory Bricks
In: IMPC 2016 : XXVIII International Mineral Processing Congress : September 11-15, Québec City Convention Center, Québec City, Canada : conference proceedings : IMPC 2016 is hosting the 55th Annual Conference of Metallurgists : COM 2016 / organized by Canadian Institute of Mining, Metallurgy and Petroleum, 2016

Knapp, Henning
Horckmans, Liesbeth
Bouillot, Frédérique
Fricke-Begemann, Cord
Connemann, Sven
et al.

[Doktorarbeit]
Technologieentwicklung zum Wendelschneiden von Edelstahl mit ultrakurz gepulster Laserstrahlung, 102, vii Seiten : Illustrationen, Diagramme, 2016

Ryll, Joachim

[Buchbeitrag, Beitrag zu einem Tagungsband]
Use of Classification Techniques to Design Laser Cutting Processes
In: The Sixth International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV2016) / Edited by Aydin Nassehi and Stephen Newman, 292-297, 2016
[DOI: 10.1016/j.procir.2016.08.001]

Tercan, Hasan
Al Khawli, Toufik
Eppelt, Urs
Büscher, Christian
Meisen, Tobias
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Aufbauratensteigerung mittels High-Power Selective Laser Melting für den Werkstoff Ti6Al4V
In: Rapid.Tech - International Trade Show & Conference for Additive Manufacturing : proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14-16 June 2016 / Wieland Kniffka, Michael Eichmann, Gerd Witt (Hrsg.), 36-48, 2016

Schniedenharn, Maximilian
Liu, Qianchu

[Buchbeitrag, Beitrag zu einem Tagungsband]
Maschinenspezifische Kostentreiber bei der additiven Fertigung mittels Laser-Strahlschmelzen (LBM)
In: Rapid.Tech - International Trade Show & Conference for Additive Manufacturing : proceedings of the 13th Rapid.Tech Conference Erfurt, Germany, 14-16 June 2016 / Wieland Kniffka, Michael Eichmann, Gerd Witt (Hrsg.), 72-89, 2016

Schrage, Johannes

[Doktorarbeit]
Sublimationsschneiden von Silizium mit ultrakurz gepulster Laserstrahlung, 1 Online-Ressource (Seite i-xix, Seite 1-143) : Illustrationen, Diagramme, 2016

Fornaroli, Christian

[Fachzeitschriftenartikel]
Laser-induced breakdown spectroscopy of scaled steel samples taken from continuous casting blooms
In: Spectrochimica acta / B, 123, 171-178, 2016
[DOI: 10.1016/j.sab.2016.08.013]

Meinhardt, Christoph
Sturm, Volker
Fleige, Rüdiger
Fricke-Begemann, Cord
Noll, Reinhard

[Fachzeitschriftenartikel]
Modelling pH-Optimized Degradation of Microgel-Functionalized Polyesters
In: Journal of healthcare engineering, 2016, 8125416, 2016
[DOI: 10.1155/2016/8125416]

Bürgermeister, Lisa
Hermann, Marcus
Fehér, Katalin
Molano Lopez, Astrid Catalina
Pich, Andrij
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Piezo-based, automated active alignment of laser resonators
In: DGaO Proceedings. - Bd. 117, 2 Seiten, 2016

Prochnau, Marcel
Greger, Dennis
Gatej, Alexander
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Simulation and measurement of thermo-optical effects in an f-theta lens at high laser power
In: DGaO Proceedings. - Bd. 117, 2 Seiten, 2016

Bonhoff, Tobias
Gayer, Christoph
Stollenwerk, Jochen Hugo
Loosen, Peter

[Abstract, Buchbeitrag, Beitrag zu einem Tagungsband]
Development of a new production method for manufacturing of hybrid parts from metal and plastics
In: 18th Chemnitz Seminar on Materials Engineering : 10-11 March 2016, Chemnitz, Germany, 12-12, 2016

Bobzin, Kirsten
Öte, Mehmet
Linke, Thomas Frederik
Liao, Xifang
Hopmann, Christian
et al.

[Fachzeitschriftenartikel]
Damage morphology and mechanism in ablation cutting of thin glass sheets with picosecond pulsed lasers
In: Optics & laser technology, 80, 227-236, 2016
[DOI: 10.1016/j.optlastec.2016.01.023]

Sun, Mingying
Eppelt, Urs
Hartmann, Claudia
Schulz, Wolfgang
Zhu, Jianqiang
et al.

[Fachzeitschriftenartikel]
High Density Perforation of Thin Al-Foils with Ultra Short Pulse Lasers in Dependence on the Repetition Rate
In: Journal of Laser Micro/Nanoengineering, 11 (2), 192-198, 2016
[DOI: 10.2961/jlmn.2016.02.0009]

Hambach, Nelli
Hartmann, Claudia
Keller, Stephan
Gillner, Arnold

[Fachzeitschriftenartikel]
Lasertechnik für industrielle Leichtbauanwendungen : Effiziente Füge- und Trennverfahren für verschiedene Leichtbauwerkstoffe im Mikro- und Makrobereich
In: Kunststoffe , 2016 (5), 34-38, 2016

van der Straeten, Kira
Britten, Simon W.
Schneider, Frank
Janssen, Stefan
Engelmann, Christoph

[Doktorarbeit]
Development and metrology of extreme ultraviolet and soft x-ray multilayer mirrors, 1 Online-Ressource (IX, 105 Seiten) : Illustrationen, Diagramme, 2016

Sertsu, Mewael Giday

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser Metal Deposition of Titanium Aluminides – A Future Repair Technology for Jet Engine Blades?
In: Proceedings of the 13th World Conference on Titanium : sponsored by Titanium Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held August 16-20, 2015, Manchester Grand Hyatt, San Diego, California, USA / edited by Vasisht Venkatesh ..., 2016

Rittinghaus, Silja-Katharina
Weisheit, Andreas
Mathes, Michael
Garcia Vargas, Wilfredo

[Fachzeitschriftenartikel]
Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source
In: Optics letters, 41 (7), 1317-1320, 2016
[DOI: 10.1364/OL.41.001317]

Baksh, Peter D.
Odstrčil, Michal
Kim, Hyun-su
Boden, Stuart A.
Frey, Jeremy G.
et al.

[Fachzeitschriftenartikel]
Wide-field broadband extreme ultraviolet transmission ptychography using a high-harmonic source: publisher’s note
In: Optics letters, 41 (13), 3057-3057, 2016
[DOI: 10.1364/OL.41.003057]

Baksh, Peter D.
Odstrčil, Michal
Kim, Hyun-su
Boden, Stuart A.
Frey, Jeremy G.
et al.

[Buch, Doktorarbeit]
Laserauftragschweißen mit der Aluminiumlegierung AlSi10Mg : Qualifizierung, mechanische Eigenschaften und Gefügeanalyse, VI, 161 Seiten : Illustrationen, Diagramme, 2016

Thiele, Wolfgang

[Buch, Doktorarbeit]
Laserfunktionalisierung von nasschemisch applizierten piezoelektrischen Blei-Zirkonat-Titanat-Schichten, II, 158 Seiten : Illustrationen, 2016

Meixner, Melanie

[Buchbeitrag, Beitrag zu einem Tagungsband]
High Resolution, Wide Field of View, Ptychographic Imaging of a Biological Sample using a High Harmonic Generation Source
In: [CLEO: Science and Innovations, 05.06.2016-10.05.2016, San Jose, Calif., USA], 2016
[DOI: 10.1364/CLEO_SI.2016.SF1I.4]

Baksh, Peter
Odstrčil, Michal
Kim, Hyun-su
Boden, Stuart
Card, Rachel
et al.

[Fachzeitschriftenartikel]
Lloyd's mirror interference lithography with EUV radiation from a high-harmonic source
In: Applied physics express, 9 (7), 076701, 2016
[DOI: 10.7567/APEX.9.076701]

Kim, Hyun-su
Baksh, Peter
Odstrčil, Michal
Miszczak, Magdalena
Frey, Jeremy G.
et al.

[Fachzeitschriftenartikel]
Freeform lens collimating spectrum-folded Hadamard transform near-infrared spectrometer
In: Optics communications, 380, 161-167, 2016
[DOI: 10.1016/j.optcom.2016.06.009]

Wang, Xiaoduo
Liu, Hua
Juschkin, Larissa
Li, Yunpeng
Xu, Jialin
et al.

[Fachzeitschriftenartikel]
Compact extreme ultraviolet source for laboratory-based photoemission spectromicroscopy
In: Applied physics letters, 108 (23), 234101, 2016
[DOI: 10.1063/1.4953071]

Schmitz, Christoph
Wilson, Daniel
Rudolf, Denis
Wiemann, Carsten
Plucinski, Lukasz
et al.

[Fachzeitschriftenartikel]
Laser-assisted vacuum arc extreme ultraviolet source: a comparison of picosecond and nanosecond laser triggering
In: Journal of physics / D, Applied physics, 49 (22), 225201, 2016
[DOI: 10.1088/0022-3727/49/22/225201]

Beyene, Girum A.
Tobin, Isaac
Juschkin, Larissa
Hayden, Patrick
O’Sullivan, Gerry
et al.

[Fachzeitschriftenartikel]
Deposition and characterization of B4C/CeO2 multilayers at 6.x nm extreme ultraviolet wavelengths
In: Journal of applied physics, 119 (9), 095301, 2016
[DOI: 10.1063/1.4942656]

Sertsu, Mewael Giday
Giglia, A.
Brose, Sascha
Park, Daniel E.
Wang, Z. S.
et al.

[Fachzeitschriftenartikel]
Single Exposure Imaging of Talbot Carpets and Resolution Characterization of Detectors for Micro- and Nano- Patterns
In: Journal of the Optical Society of Korea : JOSK, 20 (2), 245-250, 2016
[DOI: 10.3807/JOSK.2016.20.2.245]

Kim, Hyun-su
Danylyuk, Serhiy
Brocklesby, William S.
Juschkin, Larissa

[Fachzeitschriftenartikel]
Restorative Self-Image of Rough-Line Grids: Application to Coherent EUV Talbot Lithography
In: IEEE photonics journal, 8 (3), 2600209, 2016
[DOI: 10.1109/JPHOT.2016.2553847]

Kim, Hyun-su
Li, Wei
Marconi, Mario C.
Brocklesby, William S.
Juschkin, Larissa

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Alloyed Ultra-High Strength Steels
In: Laser-Technik-Journal, 13 (2), 48-52, 2016
[DOI: 10.1002/latj.201600009]

Dahmen, Martin
Gerhards, Benjamin
Lindner, Stefan

[Buchbeitrag, Beitrag zu einem Tagungsband]
An improved approach for process monitoring in laser material processing
In: Optical Modelling and Design IV : 5-7 April 2016, Brussels, Belgium / Frank Wyrowski, John T. Sheridan, Youri Meuret (editors) ; sponsored by SPIE, 98890T, 6 Seiten, 2016
[DOI: 10.1117/12.2223779]

König, Hans-Georg
Pütsch, Oliver
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buch, Doktorarbeit]
Herstellung und Eigenschaften nanopartikulär verstärkter Beschichtungen durch Laserauftragschweißen zum Verschleißschutz von Schmiedegesenken, III, 205 Seiten : Illustrationen, 2016

Ocylok, Sörn

[Buchbeitrag, Beitrag zu einem Tagungsband]
Entwicklung eines neuartigen Verfahrens zur Herstellung von Hybridbauteilen aus Metallen und Kunststoffen
In: Tagungsband zum 18. Werkstofftechnischen Kolloquium in Chemnitz : 10. und 11. März 2016 / Hrsg.: Univ.-Prof. Dr.-Ing. habil. T. Lampke ; Univ.-Prof. Dr.-Ing. T. Lampke ; Univ.-Prof. Dr.-Ing. habil. T. Lampke ; TU Chemnitz, Fakultät für Maschinenbau, Institut für Werkstoffwissenschaft und Werkstofftechnik, 199-207, 2016

Bobzin, Kirsten
Öte, Mehmet
Knoch, Martin
Liao, Xifang
Hopmann, Christian
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Diode-pumped alexandrite ring laser for lidar applications
In: Solid State Lasers XXV: Technology and Devices : San Francisco, California, United States : February 13, 2016/ W. Andrew Clarkson; Ramesh K. Shori, 97260I, 2016
[DOI: 10.1117/12.2212578]

Munk, Alexander
Jungbluth, Bernd
Strotkamp, Michael
Hoffmann, Hans-Dieter
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
Time-resolved investigations of the non-thermal ablation process of graphite induced by femtosecond laser pulses
In: Journal of applied physics, 119 (15), 153105, 2016
[DOI: 10.1063/1.4947190]

Kalupka, Christian
Finger, J.
Reininghaus, M.

[Buch, Doktorarbeit]
Modulares hybrides Laserstrahl-Bohren, IV, 131 Seiten : Illustrationen, 2016

Uchtmann, Hermann

[Buchbeitrag, Beitrag zu einem Tagungsband]
Self-optimizing Production Systems
In: Research and Innovation in Manufacturing: Key Enabling Technologies for the Factories of the Future - Proceedings of the 48th CIRP Conference on Manufacturing Systems / Edited by Roberto Teti, 417-422, 2016
[DOI: 10.1016/j.procir.2015.12.114]

Permin, Eike
Bertelsmeier, Felix
Blum, Matthias
Bützler, Jennifer
Haag, Sebastian
et al.

[Fachzeitschriftenartikel]
Simultaneous frequency stabilization, wavelength multiplexing and improvement of beam quality using a self-optimizing external cavity diode laser
In: Optics letters, 41 (3), 595-598, 2016
[DOI: 10.1364/OL.41.000595]

Hengesbach, Stefan
Klein, Sarah
Traub, Martin
Witte, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
High precision and high aspect ratio laser drilling: challenges and solutions
In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V : 16-18 February 2016, San Francisco, California, United States / Friedhelm Dorsch, Stefan Kaierle, editors ; sponsored and published by SPIE, 974106, 2016
[DOI: 10.1117/12.2222662]

Uchtmann, Hermann
He, Chao
Gillner, Arnold

[Fachzeitschriftenartikel]
Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
In: Materials and design, 98, 128-134, 2016
[DOI: 10.1016/j.matdes.2016.03.006]

Zhong, Chongliang
Gasser, Andres
Kittel, Jochen
Wissenbach, Konrad
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Microstructures and tensile properties of Inconel 718 formed by high deposition-rate laser metal deposition
In: Journal of laser applications, 28 (2), 022010, 2016
[DOI: 10.2351/1.4943290]

Zhong, Chongliang
Gasser, Andres
Kittel, Jochen
Fu, Jinbao
Ding, Yalin
et al.

[Fachzeitschriftenartikel]
Adaptive optical beam shaping for compensating projection-induced focus deformation
In: Advanced Optical Technologies, 5 (1), 71-79, 2016
[DOI: 10.1515/aot-2015-0055]

Pütsch, Oliver
Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Approach for self-optimising assembly of optical systems
In: International journal of computer integrated manufacturing, 29 (11), 1227-1237, 2016
[DOI: 10.1080/0951192X.2016.1145798]

Holters, Martin
Gatej, Alexander
Haag, Sebastian
Müller, Tobias
Loosen, Peter
et al.

[Fachzeitschriftenartikel]
Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
In: Journal of laser applications, 28 (2), 022501, 2016
[DOI: 10.2351/1.4943910]

Schopphoven, Thomas
Gasser, Andres
Wissenbach, Konrad
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Determination of process variables in melt-based manufacturing processes
In: International journal of computer integrated manufacturing, 29 (11), 1147-1158, 2016
[DOI: 10.1080/0951192X.2016.1145799]

Thombansen, Ulrich
Purrio, Marion
Buchholz, Guido
Hermanns, Torsten
Molitor, Thomas
et al.

[Doktorarbeit]
Optische Systeme für die hochpräzise, scannerbasierte Multistrahlbearbeitung mit ultrakurzen Laserpulsen, 1 Online-Ressource (II, 3-118 Seiten) : Illustrationen, Diagramme, 2016

Büsing, Lasse

[Buchbeitrag, Beitrag zu einem Tagungsband]
Simultaneous frequency stabilization and high-power dense wavelength division multiplexing (HP-DWDM) using an external cavity based on volume Bragg gratings (VBGs)
In: High-Power Diode Laser Technology and Applications XIV / Mark S. Zediker, 97330K, 15 Seiten, 2016
[DOI: 10.1117/12.2212550]

Hengesbach, Stefan
Klein, Sarah
Holly, Carlo
Witte, Ulrich
Traub, Martin
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Enabling laboratory EUV research with a compact exposure tool
In: [Extreme Ultraviolet (EUV) Lithography VII / Editors: Eric M. Panning, Kenneth A. Goldberg], 19 Seiten, 2016
[DOI: 10.1117/12.2219164]

Brose, Sascha
Danylyuk, Serhiy
Tempeler, Jenny
Kim, Hyun-su
Loosen, Peter
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Computing specific intensity distributions for laser material processing by solving an inverse heat conduction problem
In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications V : 16-18 February 2016, San Francisco, California, United States / Friedhelm Dorsch, Stefan Kaierle, editors ; sponsored and published by SPIE, 974105-1, 9 Seiten, 2016
[DOI: 10.1117/12.2220292]

Völl, Annika
Stollenwerk, Jochen Hugo
Loosen, Peter

[Doktorarbeit]
Aktive und adaptive Strahlformungssysteme für die Werkstoffbearbeitung mit Laserstrahlung, 1 Online-Ressource (115 Seiten,XXXVI) : Illustrationen, 2016

Pütsch, Oliver

[Buchbeitrag, Beitrag zu einem Tagungsband]
Automated LIBS-based classification for spent refractories from the steel industry for high-value recycling
In: 7th Sensor-Based Sorting & Control 2016 / Thomas Pretz, Hermann Wotruba (Hrsg.), 119-127, 2016

Connemann, Sven
Fricke-Begemann, Cord
Horckmanns, Liesbeth
Ducastel, Antoine
Bouillot, Frederique
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Virtual laser cutting simulation of real parameter optimization
In: [Proceedings of the 84th Laser Materials Processing Conference, 84th JLPS meeting, 19.01.2016-20.01.2016, Nagoya, Japan], 11-18, 2016

Petring, Dirk

[Doktorarbeit]
A metamodeling approach towards virtual production intelligence, 1 Online-Ressource (X, 126 Seiten) : Illustrationen, Diagramme, 2016

Al Khawli, Toufik

[Fachzeitschriftenartikel]
Theoretical and experimental analysis of scan angle-depending pulse front tilt in optical systems for laser scanners
In: Advanced Optical Technologies, 5 (1), 55–60, 2016
[DOI: 10.1515/aot-2015-0046]

Büsing, Lasse
Bonhoff, Tobias
Behnke, Lars
Stollenwerk, Jochen
Loosen, Peter

[Fachzeitschriftenartikel]
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
In: JOM : a publication of the Minerals, Metals & Materials Society (TMS), 68 (3), 943-949, 2016
[DOI: 10.1007/s11837-015-1764-2]

Jägle, Eric A.
Sheng, Zhendong
Wu, Liang
Lu, Lin
Risse, Jeroen
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Coherent Diffractive Imaging with a Laboratory-Scale, Gas-Discharge Plasma Extreme Ultraviolet Light Source
In: X-ray lasers 2014 : proceedings of the 14th International Conference on X-Ray Lasers / Jorge Rocca; Carmen Menoni; Mario Marconi, eds., 275-280, 2016
[DOI: 10.1007/978-3-319-19521-6_36]

Bußmann, J.
Odstrčil, M.
Bresenitz, R.
Rudolf, D.
Miao, J.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Lensless Proximity EUV Lithography with a Xenon Gas Discharge Plasma Radiation
In: X-ray lasers 2014 : proceedings of the 14th International Conference on X-Ray Lasers / Jorge Rocca; Carmen Menoni; Mario Marconi, eds., 313-319, 2016
[DOI: 10.1007/978-3-319-19521-6_41]

Kim, Hyun-su
Danylyuk, Serhiy
Brose, Sascha
Loosen, Peter
Bergmann, Klaus
et al.

[Fachzeitschriftenartikel]
Enabling the measurement of particle sizes in stirred colloidal suspensions by embedding dynamic light scattering into an automated probe head
In: Measurement, 80, 92-98, 2015
[DOI: 10.1016/j.measurement.2015.11.024]

de Kanter, Martinus
Meyer-Kirschner, Julian
Viell, Jörn
Mitsos, Alexander
Kather, Michael
et al.

[Doktorarbeit]
Charakterisierung und Kompensation geometrischer Einflüsse auf die Laser-Emissionsspektroskopie bei der Inline-Werkstoffanalyse, 2016

Brunk, Markus

[Buchbeitrag, Beitrag zu einem Tagungsband]
Additive manufacturing: perspectives for diode lasers
In: Proceedings of the 2015 High Power Diode Lasers and Systems Conference (HPD) : co-located with Photonex 2015, Ricoh Arena, Coventry, United Kingdom, 14h and 15th October 2015 / organised by the Scottish Chapter of the IEEE Photonics Society, 39-40, 2015
[DOI: 10.1109/HPD.2015.7439684]

Hinke, Christian
Merkt, Simon
Eibl, Florian
Schrage, Johannes
Bremen, Sebastian

[Fachzeitschriftenartikel]
Ptychographic imaging with a compact gas–discharge plasma extreme ultraviolet light source
In: Optics letters, 40 (23), 5574-5577, 2015
[DOI: 10.1364/OL.40.005574]

Odstrcil, Michal
Bußmann, Jan
Rudolf, D.
Bresenitz, R.
Miao, Jianwei
et al.

[Fachzeitschriftenartikel]
3D-Druck-Prozesskette für Extrusionswerkzeuge
In: Branchen-Report Werkzeugmaschinen, 2015

Hinke, Christian Rüdiger
Windeck, Christian

[Buchbeitrag]
2. Nanoscale biofunctionalization of polymer surfaces by laser treatment for controlled cellular differentiation
In: Optically induced nanostructures : biomedical and technical applications / ed. by Karsten König and Andreas Ostendorf, 179-198, 2015
[DOI: 10.1515/9783110354324-013]

Steger, Michael
Abagnale, G.
Bremus-Köbberling, Elke
Wagner, W.
Gillner, Arnold

[Buchbeitrag, Beitrag zu einem Tagungsband]
Implementation Aspects of On-Chip Printed Micro Heat Sinks for Power Semiconductors
In: 2015 IEEE Energy Conversion Congress and Exposition (ECCE 2015) : Montreal, Quebec, Canada, 20 - 24 September 2015. - 8, 5716-5723, 2015
[DOI: 10.1109/ECCE.2015.7310463]

Conrad, Marcus
Diatlov, Andrei
de Doncker, Rik W.

[Konferenzbeitrag]
Automated LIBS sorting system for spent refractories from the steel industry for high-value recycling
In: 8th Euro-Mediterranean Symposium on Laser Induced Breakdown Spectroscopy Linz 2015-09-14 - 2015-09-18, 12 Seiten, 2015

Connemann, Sven
Fricke-Begemann, C.
Noll, Reinhard
Knapp, Henning
Horckmanns, L.
et al.

[Konferenzbeitrag]
Innovative separation technologies for refractory waste
In: 14th Biennial Worldwide Congress UNITECR 2015 Vienna 2015-09-15 - 2015-09-18, 14 Folien, 2015

Ducastel, A.
Gueguen, E.
Horckmanns, L.
Bouillot, F.
Fricke-Begemann, C.
et al.

[Konferenzbeitrag]
Automated sorting of spent refractories from the steel industry for high-value recycling
In: 9th International Conference on Progress in Analytical Chemistry & Materials Characterisation in the Steel and Metals Industries Düsseldorf 2015-05-19 - 2015-05-21, 12 Seiten, 2015

Connemann, Sven
Fricke-Begemann, C.
Noll, Reinhard
Knapp, Henning
Horckmanns, L.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Process observation in selective laser melting (SLM)
In: High-power laser materials processing: lasers, beam delivery, diagnostics, and applications IV : 10 - 12 February 2015, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Friedhelm Dorsch, ed., 9356 OR, 2015
[DOI: 10.1117/12.2079475]

Thombansen, Ulrich
Abels, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
Mathematical modelling and linear stability analysis of laser fusion cutting
In: [International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2015, 22.09.2015-28.09.2015, Rhodes, Greece], 370002, 2015
[DOI: 10.1063/1.4952147]

Hermanns, Torsten
Schulz, Wolfgang
Vossen, Georg
Thombansen, Ulrich

[Buchbeitrag, Beitrag zu einem Tagungsband]
An integrated approach for the knowledge discovery in computer simulation models with a multi-dimensional parameter space
In: [12th International Conference of Numerical Analysis and Applied Mathematics, ICNAAM, 22.09.2015-28.09.2015, Rhodes, Greece], 370003, 2015
[DOI: 10.1063/1.4952148]

Al Khawli, Toufik
Gebhardt, Sascha
Eppelt, Urs
Hermanns, Torsten
Kuhlen, Torsten
et al.

[Doktorarbeit]
Magnetic interface effects in thin film heterostructures, 1 Online-Ressource (XI, 187 Seiten) : Illustrationen, Diagramme, 2015

Zakalek, Paul Jan

[Buchbeitrag]
Sensitivity Analysis of Laser Cutting Based on Metamodeling Approach
In: Handbook of Research on Computational Simulation and Modeling in Engineering Francisco Miranda and Carlos Abreu, editors, 618-639, 2015
[DOI: 10.4018/978-1-4666-8823-0.ch020]

Al Khawli, Toufik
Eppelt, Urs
Schulz, Wolfgang

[Beitrag zu einem Tagungsband]
Analysis and Evaluation of Boundary Conditions for Direct Surface Structuring by Multi-Beam Interference
In: LAMP 2015 : the 7th International Congress on Laser Advanced Materials Processing : LPM 2015-the 16th International Symposium on Laser Precision Microfabrication : HPL 2015-the 7th International Symposium on High Power Processing : May 26-29, 2015, Kitakyushu, Fukuoka, Japan : program & technical digest / general chair: Koji Sugioka; organzid by Japan Laser Processing Society, Japan, 2015

Steger, Michael
Gillner, Arnold

[Beitrag zu einem Tagungsband]
Repetition rate dependency for high density perforation of thin Al-foils with ultra short pulse lasers
In: LAMP 2015 : the 7th International Congress on Laser Advanced Materials Processing : LPM 2015-the 16th International Symposium on Laser Precision Microfabrication : HPL 2015-the 7th International Symposium on High Power Processing : May 26-29, 2015, Kitakyushu, Fukuoka, Japan : program & technical digest / general chair: Koji Sugioka; organzid by Japan Laser Processing Society, Japan, 2015

Hambach, N.
Hartmann, Claudia
Keller, A.
Gillner, Arnold

[Buchbeitrag, Beitrag zu einem Tagungsband]
Ultra-broadband ptychography with self-consistent coherence estimation from a high harmonic source
In: X-ray lasers and coherent x-ray sources: development and applications XI : 12 - 13 August 2015, San Diego, California, USA ; [part of SPIE optics + photonics] / sponsored and publ. by SPIE. Annie Klisnick ..., ed., 958912, 8 Seiten, 2015
[DOI: 10.1117/12.2188166]

Odstrčil, Michal
Baksh, P.
Kim, H.
Boden, S. A.
Brocklesby, William S.
et al.

[Doktorarbeit]
Laserstrahlschweißen von Kupferwerkstoffen mit brillanten Strahlquellen im infraroten und grünen Wellenlängenbereich, IX, 130 S. : Ill., graph. Darst., 2015

Engler, Sebastian Michael

[Abstract, Beitrag zu einem Tagungsband]
Laser beam propagation and energy deposition in particulate PEEK layers
In: Lasers in manufacturing 2015 : LiM 2015 ; proceedings ; June 22 - 25, 2015, Munich ICM, Internationales Congress Center München, Germany ; [part of the] World of Photonics Congress / organizer WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., The German Scientific Laser Society ... General chair: Thomas Graf, 9 Seiten, 2015

Sändker, Hendrik
Stollenwerk, Jochen Hugo
Hofmann, Johannes
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
An Interactive Approach for Fast and Frugal Decision Making in Innovative Research Cooperation
In: ICERI2015 : 8th International Conference of Education, Research and Innovation Seville, Spain. 18-20 November, 2015, 2015

Jansen, Ulrich
Schulz, Wolfgang

[Fachzeitschriftenartikel]
Qualitativ ebenbürtig
In: CNC-Arena eMagazine für Fertigungstechnik und Automatisierung, 2, 18-, 2015

Windeck, Christian
Hinke, Christian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison of contour-hatch and point-like scan strategy for manufacturing lattice structures by selective laser melting (SLM)
In: MSTAM 2014 : proceedings of the 1st International Symposium "Materials and Technology of Additive Manufacturing" taking place in Bremen, 27th to 28th May 2014, 1-6, 2015

Merkt, Simon
Winkelmann, M.
Bültmann, Jan

[Bericht]
Untersuchung zum Schmelzschweissen höchstfester nichtrostender Stähle mit martensitischem Gefüge mittels Laserstrahl- und MAG-Schweissen : IGF-Vorhaben 17433 N der FOSTA – Forschungsvereinigung Stahlanwendung e.V., Düsseldorf. Forschung für die Praxis P 905, 107 S., 2015

Dahmen, Martin
Janzen, Vitalij
Lindner, Stefan
Wagener, Rainer

[Buchbeitrag, Beitrag zu einem Tagungsband]
flapAssist: How the integration of VR and visualization tools fosters the factory planning process
In: 2015 IEEE virtual reality (VR 2015) : Arles, Camargue, Provence, France, 23 - 27 March 2015 ; [including papers from the Workshop on Perceptual and Cognitive Issues in AR (PERCAR)] / [sponsored by the IEEE Computer Society Visualization and Graphics Technical Committee. Ed. by Tobias Höllerer ...], 181-182, 2015
[DOI: 10.1109/VR.2015.7223355]

Gebhardt, Sascha
Pick, Sebastian
Voet, Hanno
Utsch, Julian
Al Khawli, Toufik
et al.

[Doktorarbeit]
Qualifizierung von generativ gefertigten Gitterstrukturen für maßgeschneiderte Bauteilfunktionen, 1 Online-Ressource (III, 130, 31 Seiten) : Illustrationen, Diagramme, 2015

Merkt, Simon

[Beitrag zu einem Tagungsband]
Investigation of the influence of laser surface modifications on the adhesive wear behavior in dry cold extrusion of aluminium
In: Lasers in manufacturing 2015 : LiM 2015 ; proceedings ; June 22 - 25, 2015, Munich ICM, Internationales Congress Center München, Germany ; [part of the] World of Photonics Congress / organizer WLT, Wissenschaftliche Gesellschaft Lasertechnik e.V., The German Scientific Laser Society ... General chair: Thomas Graf, 10 S., 2015

Roß, Ingo
Temmler, André
Willenborg, Edgar
Poprawe, Reinhart
Teller, Marco

[Fachzeitschriftenartikel]
Surface quality of profile extrusion dies manufactured by Selective Laser Melting
In: RTejournal - Forum für Rapid Technologie, 2015 (12), 4290, 2015

Hopmann, Christian
Yesildag, Nafi
Bremen, Sebastian
Wissenbach, Konrad
Merkt, Simon

[Fachzeitschriftenartikel]
Untersuchung zur Oberflächenmodifikation mittels Laserpolieren für das schmiermittelfreie Kaltfließpressen von Aluminium
In: Dry metal forming open access journal, 1, 143-151, 2015

Roß, Ingo
Temmler, André
Poprawe, Reinhart
Teller, Marco
Hirt, Gerhard
et al.

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Selective Laser Melting of magnesium alloys
In: European cells & materials, 30 (Suppl. 3), Abstract, Page 1-1, 2015

Jauer, Lucas
Jülich, Bastian
Voshage, Maximilian
Meiners, Wilhelm

[Doktorarbeit]
Strain and electric field mediated manipulation of magnetism in La$_{(1-x)}$Sr$_x$MnO$_3$/BaTiO$_3$ heterostructures, 1 Online-Ressource (VI, 141 Seiten) : Illustrationen, 2015

Schmitz, Markus

[Fachzeitschriftenartikel]
Analysis of buried interfaces in multilayer mirrors using grazing incidence extreme ultraviolet reflectometry near resonance edges
In: Applied optics, 54 (35), 10351-10358, 2015
[DOI: 10.1364/AO.54.010351]

Sertsu, Mewael Giday
Nardello, M.
Giglia, A.
Corso, A. J.
Maurizio, C.
et al.

[Fachzeitschriftenartikel]
Generation of circularly polarized radiation from a compact plasma-based EUV light source for tabletop X-ray magnetic circular dichroism studies
In: Annual Report / JARA-FIT, Jülich Aachen Research Alliance for Fundamentals of Future Information Technology, 2014, 113-114, 2015

Wilson, Daniel
Rudolf, Denis
Weier, Christian
Adam, Roman
Winkler, Gerrit
et al.

[Fachzeitschriftenartikel]
A phase retrieval algorithm based on three-dimensionally translated diffraction patterns55 S.)
In: epl : a letters journal exploring the frontiers of physics, 111 (6), 64002, 2015
[DOI: 10.1209/0295-5075/111/64002]

Loetgering, L.
Hammoud, R.
Juschkin, Larissa
Wilhein, Thomas

[Fachzeitschriftenartikel]
Optical properties of 2D fractional Talbot patterns under coherent EUV illumination
In: Journal of physics / D, 48 (37), 375101, 2015
[DOI: 10.1088/0022-3727/48/37/375101]

Kim, H.
Li, W.
Danylyuk, Serhiy
Brocklesby, William S.
Marconi, Mario C.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Optical and structural characterization of CeO2/B4C multilayers near boron K-edge energy
In: EUV and X-ray optics: synergy between laboratory and space IV : 13 - 14 April 2015, Prague, Czech Republic ; [part of SPIE optics + optoelectronics] / sponsored by SPIE. René Hudec ..., ed., 95100, 12 S., 2015
[DOI: 10.1117/12.2181820]

Sertsu, M. G.
Giglia, A.
Brose, Sascha
Comisso, A.
Wang, Z. S.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Irradiation of low energy ions damage analysis on multilayers
In: Damage to VUV, EUV, and X-ray optics V : 15 - 16 April 2015, Prague, Czech Republic ; [part of SPIE optics + optoelectronics] / sponsored by SPIE. Libor Juha ..., ed., 95110P, 8 S., 2015
[DOI: 10.1117/12.2181821]

Sertsu, M. G.
Giglia, A.
Juschkin, Larissa
Nicolosi, P.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Employing partially coherent, compact gas-discharge sources for coherent diffractive imaging with extreme ultraviolet light
In: X-ray lasers and coherent x-ray sources: development and applications XI : 12 - 13 August 2015, San Diego, California, USA ; [part of SPIE optics + photonics] / sponsored and publ. by SPIE. Annie Klisnick ..., ed., 95890L, 2015
[DOI: 10.1117/12.2187852]

Bußmann, Johannes
Odstrčil, Michal
Bresenitz, R.
Rudolf, Denis
Miao, Jianwei
et al.

[Fachzeitschriftenartikel]
Microgel-functionalised fibres with pH-optimised degradation behaviour : a promising approach for short-term medical applications
In: BioNanoMaterials, 16 (4), 259-264, 2015
[DOI: 10.1515/bnm-2015-0015]

Fehér, Katalin
Romstadt, Tobias
Böhm, Christian A.
Kolkenbrock, Martin
Blau, Maximilian F.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Contributions for the next generation of 3D metal printing machines
In: Laser 3D manufacturing II : 10 - 12 February 2015, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored by SPIE. Henry Helvajian ..., ed., UNSP 935318, 2015
[DOI: 10.1117/12.2079027]

Pereira, M.
Thombansen, U.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Advantages and drawbacks of Thiol-ene based resins for 3D-printing
In: Laser 3D manufacturing II : 10 - 12 February 2015, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored by SPIE. Henry Helvajian ..., ed., UNSP 93530F, 2015
[DOI: 10.1117/12.2081169]

Leonards, Holger
Engelhardt, Sascha
Hoffmann, Andreas
Pongratz, Ludwig
Schriever, Sascha
et al.

[Beitrag zu einem Tagungsband]
Comparison of different irradiation methods in absorber-free laser transmission welding
In: Proceedings auf LAMP2015, 6 S., 2015

Mamuschkin, Viktor
Engelmann, Christoph
Aden, Mirko
Olowinsky, Alexander

[Beitrag zu einem Tagungsband]
Examination of the bond strength of laser assisted plastic-metal-joints considering different load directions
In: Proceedings of LAMP2015, 6 S., 2015

Engelmann, Christoph
Eckstädt, Johannes
Olowinsky, Alexander
Aden, Mirko
Mamuschkin, Viktor

[Beitrag zu einem Tagungsband]
Drilling of holes for force transmission elements in CFRP-preforms via ultra-short pulse laser radiation
In: Proceedings of LAMP2015, 7 S., 2015

Janssen, Stefan
Fögen, Niklas
Kelbassa, Ingomar
Cetin, Mesut
Oppitz, Sebastian

[Beitrag zu einem Tagungsband]
Measurement of the vapor plume velocity in Laser Impulse Metal Bonding with temporal power modulation
In: Proceedings of LAMP2015, 7 S., 2015

Britten, Simon W.
Wang, Anthony Y.-T.
Olowinsky, Alexander
Gillner, Arnold

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser polishing of glass
In: [Optifab 2015 / Julie L. Bentley, Sebastian Stoebenau, ed.], 963303 (10 S.), 2015
[DOI: 10.1117/12.2200972]

Weingarten, Christian
Heidrich, Sebastian
Wu, Yingchao
Willenborg, Edgar

[Fachzeitschriftenartikel]
Laserinduzierte Wirkstofffreisetzung aus textilen Implantaten
In: Mitteilungen / Institut für Textiltechnik, 61. 2014, 123, 2015

Fehér, Katalin
Leonards, Holger
Bremus-Köbberling, Elke Auguste
Schmitz, Dominik
Pich, Andrij
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laserbasierte Fügeverfahren für faserverstärkte Kunststoffe
In: DVS congress 2015 : Große Schweißtechnische Tagung ; DVS-Studentenkongress ; Fügen von faserverstärkten Kunststoffen ; Anwendungsnahe Schweißsimulation ; Schulung und Prüfung im DVS ; IBESS - Forschungscluster "Bruchmechanik" ; Vorträge der Veranstaltungen im Rahmen von DVS Congress und DVS Expo in Nürnberg vom 15. bis 17. September 2015 / Veranst.: DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V., Düsseldorf, 911-915, 2015

Engelmann, Christoph
van der Straeten, Kira
Mamuschkin, Viktor
Olowinsky, Alexander

[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison Between ps- and μs-Laser Radiation for Drilling Holes for Force Transmission Elements in CFRP-preforms
In: ICALEO® 2015 Congress Proceedings / Congress General Chair: Silke Pflueger, DirectPhotonics, Inc., 2015

Janssen, Stefan
Reinelt, Simon
Kelbassa, Ingomar
Oppitz, Sebastian
Cetin, Mesut

[Fachzeitschriftenartikel]
Klare Sicht mit neuem Licht : Optimierung des Energieeintrags beim absorberfreien Laserdurchstrahlschweißen
In: Kunststoffe , 2015 (6), 26-29, 2015

Olowinsky, Alexander
Engelmann, Christoph
Mamuschkin, Viktor

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser transmission welding of absorber-free thermoplastics using dynamic beam superposition
In: High-power laser materials processing: lasers, beam delivery, diagnostics, and applications IV : 10 - 12 February 2015, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE / Friedhelm Dorsch, ed., 9356 0Y, 8 S., 2015
[DOI: 10.1117/12.2079691]

Mamuschkin, Viktor
Olowinsky, Alexander
van der Straeten, Kira
Engelmann, Christoph

[Fachzeitschriftenartikel]
Gepulste Hochleistungslaser mit adressierbarer Wellenlänge im IR
In: Photonik, 2005 (6), 34-37, 2015

Jungbluth, Bernd

[Fachzeitschriftenartikel]
Polieren von Oberflächen mit Laserstrahlung
In: Laser-Magazin (3), 9-10, 2015

Nüsser, Christian
Weingarten, Christian

[Fachzeitschriftenartikel]
Laser cutting of bone tissue under bulk water with a pulsed ps-laser at 532 nm
In: Journal of biomedical optics, 20 (10), 105007, 2015
[DOI: 10.1117/1.JBO.20.10.105007]

Tulea, Cristian-Alexander
Caron, Jan
Gehlich, Nils
Lenenbach, Achim
Noll, Reinhard
et al.

[Beitrag zu einem Tagungsband]
Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
In: [International Congress on Applications of Lasers & Electro–Optics 2015, ICALEO, 18.10.2015-22.10.2015, Atlanta, GA, USA], 1601, 10 S., 2015

Schopphoven, Thomas
Gasser, Andres
Wissenbach, Konrad
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Study of process window development for high deposition-rate laser material deposition by using mixed processing parameters
In: Journal of laser applications, 27 (3), 032008, 2015
[DOI: 10.2351/1.4919804]

Zhong, Chongliang
Gasser, Andres
Kittel, Jochen
Schopphoven, Thomas
Pirch, Norbert
et al.

[Beitrag zu einem Tagungsband]
Glass processing with high power q-switch CO2 laser radiation
In: [International Congress Lasers in Manufacturing 2015, LiM 2015, München, June 22 - 25, 2015 : [proceedings] / Wissenschaftliche Gesellschaft Lasertechnik], 2015

Heidrich, Sebastian
Weingarten, Christian
Uluz, Emrah
Poprawe, Reinhart

[Buchbeitrag, Beitrag zu einem Tagungsband]
Modeling of optical aberrations due to thermal deformation using finite element analysis and ray-tracing
In: Optical systems design 2015 : Optical design and engineering VI ; 7 - 10 September 2015, Jena, Germany ; [part of SPIE optical systems design] / sponsored by SPIE. Laurent Mazuray ..., ed., 96261V, 10 S., 2015
[DOI: 10.1117/12.2190879]

Bonhoff, Tobias
Büsing, Lasse
Stollenwerk, Jochen
Loosen, Peter

[Fachzeitschriftenartikel]
The voxel onset time as an in situ method to evaluate focal position effects on two-photon-induced lithography
In: Applied physics / A, 121 (2), 513-519, 2015
[DOI: 10.1007/s00339-015-9449-9]

Engelhardt, Sascha
Tempeler, Jenny
Wehner, Martin

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser polishing of metallic freeform surfaces
In: 4M/ICOMM 2015 : proceedings of the 4M/ICOMM2015 Conference ; 31st March - 2nd April 2015, Milan, Italy ; [... also constitutes the 10th ICOMM - International Conference on Micro Manufacturing and 11th 4M - Multi Material Micro Manufacture Conference] / edited by Massimillano Annoni....; organized by the International Institution for Micromanufacturing (I2M2) and the 4M Association, 352-355, 2015

Kumstel, Judith
Flemmer, John
Temmler, André

[Buchbeitrag, Beitrag zu einem Tagungsband]
Polieren von SLM-Bauteilen mit kontinuierlicher Laserstrahlung
In: Rapid.Tech : Tagungsband 2015 / Trade Fair and User's Conference for Rapid Technology, 1 SD-Card, 2015

Kumstel, Judith
Biermann, Mario

[Fachzeitschriftenartikel]
Extreme ultraviolet proximity lithography for fast, flexible and parallel fabrication of infrared antennas
In: Optics express, 23 (20), 25487-25495, 2015
[DOI: 10.1364/OE.23.025487]

Kunkemöller, Georg
Maß, Tobias Wilhelm Wolfgang
Michel, Ann-Katrin U.
Kim, Hyun-Su
Brose, Sascha
et al.

[Fachzeitschriftenartikel]
Laser polishing and laser form correction of fused silica optics
In: Materialwissenschaft und Werkstofftechnik, 46 (7), 668-674, 2015
[DOI: 10.1002/mawe.201500319]

Heidrich, Sebastian
Willenborg, E.
Weingarten, C.
Temmler, A.

[Fachzeitschriftenartikel]
Experimental study of porosity reduction in high deposition-rate Laser Material Deposition
In: Optics & laser technology, 75, 87-92, 2015
[DOI: 10.1016/j.optlastec.2015.06.016]

Zhong, Chongliang
Gasser, Andres
Schopphoven, Thomas
Poprawe, Reinhart

[Fachzeitschriftenartikel]
High power ultra-short pulse laser ablation of IN718 using high repetition rates
In: Journal of materials processing technology, 226, 221–227, 2015
[DOI: 10.1016/j.jmatprotec.2015.07.014]

Finger, J.
Kalupka, C.
Reininghaus, M.

[Fachzeitschriftenartikel]
Experimental study of effects of main process parameters on porosity, track geometry, deposition rate, and powder efficiency for high deposition rate laser metal deposition
In: Journal of laser applications, 27 (4), 042003, 2015
[DOI: 10.2351/1.4923335]

Zhong, Chongliang
Biermann, Tim
Gasser, Andres
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Editor Note: 'Fabrication of nanoparticulate reinforced metal matrix composites by laser cladding' [J. Laser Appl. 26, 022007 (2014)]
In: Journal of laser applications, 27 (S1), S17002, 2015
[DOI: 10.2351/1.4897014]

Zhong, Minlin
Jiang, Dafa
Zhang, Hongjun
Hong, Chen
Weisheit, Andreas
et al.

[Fachzeitschriftenartikel]
Densification behavior, microstructure evolution, and wear property of TiC nanoparticle reinforced AlSi10Mg bulk-form nanocomposites prepared by selective laser melting
In: Journal of laser applications, 27 (S1), S17003, 2015
[DOI: 10.2351/1.4870877]

Gu, Dongdong
Wang, Hongqiao
Dai, Donghua
Chang, Fei
Meiners, Wilhelm
et al.

[Fachzeitschriftenartikel]
Rapid fabrication of Al-based bulk-form nanocomposites with novel reinforcement and enhanced performance by selective laser meltingine
In: Scripta materialia, 96, 25-28, 2015
[DOI: 10.1016/j.scriptamat.2014.10.011]

Gu, Dongdong
Wang, Hongqiao
Dai, Donghua
Yuan, Pengpeng
Meiners, Wilhelm
et al.

[Buchbeitrag]
Nanophotonic applications of fs-laser radiation induced nanostructures and their theoretical description
In: Optically induced nanostructures : biomedical and technical applications / ed. by Karsten König and Andreas Ostendorf, 25-46, 2015
[DOI: 10.1515/9783110354324-006]

Reininghaus, Martin
Ivanov, D.
Maß, T. W. W.
Eckert, S.
Juschkin, Larissa
et al.

[Fachzeitschriftenartikel]
Table-Top EUV and Soft X-Ray Microscopy
In: Imaging & microscopy, 2015 (May 26), 3 S., 2015

Herbert, Stefan
Bahrenberg, Lukas
Maryasov, Aleksey
Danylyuk, Serhiy
Loosen, Peter
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Multi-angle spectroscopic extreme ultraviolet reflectometry for analysis of thin films and interfaces
In: Physica status solidi / C, 12 (3), 318-322, 2015
[DOI: 10.1002/pssc.201400117]

Danylyuk, Serhiy
Herbert, Stefan
Loosen, Peter
Lebert, Rainer
Schäfer, Anna
et al.

[Fachzeitschriftenartikel]
Interferometric broadband Fourier spectroscopy with a partially coherent gas-discharge extreme ultraviolet light sourceeuv
In: Optics letters, 40 (12), 2818-2821, 2015
[DOI: 10.1364/OL.40.002818]

Rudolf, Denis
Bußmann, Jan
Odstrcil, Michal
Dong, Minjie
Bergmann, Klaus
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Analysis of distinct scattering of extreme ultraviolet phase and amplitude multilayer defects with an actinic dark-field microscope
In: Extreme Ultraviolet (EUV) Lithography VI / Obert R. Wood; Eric M. Panning, 942229, 2015
[DOI: 10.1117/12.2085929]

Bahrenberg, Lukas
Herbert, Stefan
Tempeler, Jenny
Maryasov, Aleksey
Hofmann, Oskar
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Active optical system for advanced 3D surface structuring by laser remelting
In: High power laser materials processing : lasers, beam delivery, diagnostics, and applications IV : 10-12 February 2015, San Francisco, Calif., United States / Friedhelm Dorsch; Society of Photo-optical Instrumentation Engineers, 93560U, 10 S., 2015
[DOI: 10.1117/12.2076051]

Pütsch, O.
Temmler, A.
Stollenwerk, J.
Willenborg, E.
Loosen, P.

[Fachzeitschriftenartikel]
Hyperbolic phonon-polaritons in boron nitride for near-field optical imaging and focusing
In: Nature Communications, 6, 7507, 2015
[DOI: 10.1038/ncomms8507]

Li, Peining
Lewin, Martin
Kretinin, Andrey V.
Caldwell, Joshua D.
Novoselov, Kostya S.
et al.

[Fachzeitschriftenartikel]
Surface topography enhances differentiation of mesenchymal stem cells towards osteogenic and adipogenic lineages
In: Biomaterials, 61, 316-326, 2015
[DOI: 10.1016/j.biomaterials.2015.05.030]

Abagnale, Giulio
Steger, Michael
Nguyen, Vu Hoa
Hersch, Nils
Sechi, Antonio
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Brightness and average power as driver for advancements in diode lasers and their applications
In: High-power diode laser technology and applications XIII, 2015
[DOI: 10.1117/12.2085068]

Zediker, Mark S.
Hengesbach, Stefan
Poprawe, Reinhart
Hoffmann, Dieter
Traub, Martin
et al.

[Fachzeitschriftenartikel]
Investigation of the suitability of surface treatments for dry cold extrusion by process-oriented tribological testing
In: Key engineering materials, 651/653, 473-479, 2015
[DOI: 10.4028/www.scientific.net/KEM.651-653.473]

Teller, Marco
Bambach, Markus
Hirt, Gerhard
Roß, Ingo
Temmler, André
et al.

[Fachzeitschriftenartikel]
Scalability of the mechanical properties of selective laser melting produced micro-struts
In: Journal of laser applications, 27 (S2), S29206, 2015
[DOI: 10.2351/1.4906392]

Bültmann, Jan
Merkt, Simon
Hammer, Christine
Hinke, Christian
Prahl, Ulrich

[Fachzeitschriftenartikel]
Process- and Material-Induced Surface Structures During Laser Polishing
In: Advanced engineering materials, 17 (3), 268-277, 2015
[DOI: 10.1002/adem.201400426]

Nüsser, Christian
Kumstel, Judith
Kiedrowski, Thomas
Diatlov, Andrei
Willenborg, Edgar

[Fachzeitschriftenartikel]
Suppression of cross coupling in an external resonator for a diode laser bar with 19 single emitters
In: Optics letters, 40 (4), 641-644, 2015
[DOI: 10.1364/OL.40.000641]

Klein, Sarah
Hengesbach, Stefan
Westphalen, Thomas
Traub, Martin
Hoffmann, Dieter

[Buchbeitrag]
SLM Production Systems : Recent Developments in Process Development, Machine Concepts and Component Design
In: Advances in Production Technology / edited by Christian Brecher, 49-65, 2015
[DOI: 10.1007/978-3-319-12304-2_5]

Poprawe, Reinhart
Hinke, Christian
Meiners, Wilhelm
Schrage, Johannes
Bremen, Sebastian
et al.

[Fachzeitschriftenartikel]
Innoslab Amplifiers
In: IEEE journal of selected topics in quantum electronics, 21 (1), 447-463, 2015
[DOI: 10.1109/JSTQE.2014.2333234]

Russbueldt, Peter
Hoffmann, Dieter
Höfer, Marco
Löhring, Jens
Luttmann, Jörg
et al.

[Fachzeitschriftenartikel]
Laser additive manufacturing of ultrafine TiC particle reinforced Inconel 625 based composite parts : Tailored microstructures and enhanced performance
In: Materials science and engineering / A, 635, 118-128, 2015
[DOI: 10.1016/j.msea.2015.03.043]

Hong, Chen
Gu, Dongdong
Dai, Donghua
Alkhayat, Moritz
Urban, Wolf
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Modelling for self-optimization in laser cutting
In: Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014) : Rhodes, Greece, 22-28 September 2014 / Editors: Theodore Simos and Charalambos Tsitouras, 710003, 4 S., 2015
[DOI: 10.1063/1.4912927]

Hermanns, Torsten
Thombansen, Ulrich
Stoyanov, Stoyan

[Buchbeitrag, Beitrag zu einem Tagungsband]
Metamodeling of laser cutting
In: Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 (ICNAAM-2014) : Rhodes, Greece, 22-28 September 2014 / Editors: Theodore Simos and Charalambos Tsitouras, 710002, 4 S., 2015
[DOI: 10.1063/1.4912926]

Eppelt, Urs
Al Khawli, Toufik

[Fachzeitschriftenartikel]
Active reduction of waviness through processing with modulated laser power
In: Journal of laser applications, 27 (2), 022004-, 2015
[DOI: 10.2351/1.4906622]

Oreshkin, O.
Küpper, M.
Temmler, A.
Willenborg, E.

[Abstract, Beitrag zu einem Tagungsband]
High precise cutting of carbon- and glass fiber using laser technology
In: Abstract Book : International Conference on Advances in Composite Materials and Structures (CACMS 2015), 13-15 April 2015, Istanbul, 120-120, 2015

Cetin, Mesut
Oppitz, Sebastan
Janssen, Stefan
Gries, Thomas

[Fachzeitschriftenartikel]
Laser statt Trockenöfen
In: Farbe und Lack, 2015 (3), 88-92, 2015

Meixner, Melanie
Stollenwerk, Jochen Hugo
Weigt, Wilfried
Zschuppe, Monika

[Fachzeitschriftenartikel]
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
In: Journal of materials processing technology, 221, 112-120, 2015
[DOI: 10.1016/j.jmatprotec.2015.02.013]

Weingarten, Christian
Buchbinder, Damien
Pirch, Norbert
Meiners, Wilhelm
Wissenbach, Konrad
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
High-temperature oxidation performance and its mechanism of TiC/Inconel 625 composites prepared by laser metal deposition additive manufacturing
In: Journal of laser applications, 27 (S1), S17005, 2015
[DOI: 10.2351/1.4898647]

Hong, Chen
Gu, Dongdong
Dai, Donghua
Cao, Sainan
Alkhayat, Moritz
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Mechanical response of TiAl6V4 lattice structures manufactured by selective laser melting in quasistatic and dynamic compression tests
In: Journal of laser applications, 27 (S1), S17006, 2015
[DOI: 10.2351/1.4898835]

Merkt, S.
Hinke, C.
Bültmann, J.
Brandt, M.
Xie, Y. M.

[Fachzeitschriftenartikel]
Geometrical on-axis access to high-finesse resonators by quasi-imaging : a theoretical description
In: Journal of optics, 17 (2), 025609, 2015
[DOI: 10.1088/2040-8978/17/2/025609]

Weitenberg, Johannes
Rußbüldt, P.
Pupeza, I.
Udem, Th
Hoffmann, Hans-Dieter
et al.

[Buchbeitrag]
The development of incremental sheet forming from flexible forming to fully integrated production of sheet metal parts
In: Advances in Production Technology / edited by Christian Brecher, 117-129, 2015
[DOI: 10.1007/978-3-319-12304-2_9]

Hirt, Gerhard
Bambach, Markus
Bleck, Wolfgang
Prahl, Ulrich
Stollenwerk, Jochen Hugo

[Buchbeitrag, Beitrag zu einem Tagungsband]
Injection moulding of optical functional micro structures using laser structured, PVD-coated mould inserts
In: Proceedings of PPS-30 : the 30th International Conference of the Polymer Processing Society - conference papers, Cleveland, Ohio, USA, 6 - 12 June 2014 / editor Sadhan C. Jana (University of Akron, Ohio, USA), 110003, 1-5, 2015
[DOI: 10.1063/1.4918478]

Hopmann, Christian
Weber, Mathias
Schöngart, Maximilian
Schäfer, Christian
Bobzin, Kirsten
et al.

[Fachzeitschriftenartikel]
Process observation in fiber laser-based selective laser melting
In: Optical engineering, 54, 011008, 2015
[DOI: 10.1117/1.OE.54.1.011008]

Thombansen, Ulrich
Gatej, Alexander
Pereira, Milton

[Buchbeitrag]
Meta-modelling techniques towards virtual production intelligence
In: Advances in Production Technology / edited by Christian Brecher, 69-84, 2015
[DOI: 10.1007/978-3-319-12304-2_6]

Schulz, Wolfgang
Al Khawli, Toufik

[Buchbeitrag, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser-based production of carbon fibers
In: Journal of Laser Applications, 27 (S2), S28001, 2015
[DOI: 10.2351/1.4906476]

Lott, Philipp
Stollenwerk, Jochen Hugo
Wissenbach, Konrad

[Doktorarbeit]
Prozessdiagnose dynamischer Schmelzen zur Regelung von Laserschneidprozessen, IV, 106 S. : Ill., graph. Darst., 2015

Molitor, Thomas

[Doktorarbeit]
Lokale Laserfunktionalisierung mit Biomolekülen zur Herstellung von Konzentrationsgradienten, V, 109 S. : Ill., graph. Darst., 2015

Nottrodt, Nadine

[Doktorarbeit]
Qualifizierung des Laserstrahl-Auftragschweißens zur generativen Fertigung von Luftfahrtkomponenten, XII, 109, XXXIV S. : Ill., graph. Darst., 2015

Witzel, Johannes

[Doktorarbeit]
Montage nichtlinearer optischer Kristalle für den Einsatz in der Luft- und Raumfahrt, 113 S. : Ill., graph. Darst., 2015

Faidel, Heinrich

[Buch, Doktorarbeit]
Ortsselektives, präzises Laserdrucken von Biomaterialien und Zellen, III, 113 S. : Ill., graph. Darst., 2015

Riester, Dominik

[Doktorarbeit]
Grundlegende Untersuchung des inversen Glasbohrens zur Herstellung einer photonischen Faser, V, 127 S. : Ill., graph. Darst., 2015

Werner, Marcel

[Doktorarbeit]
Laserbasierte Herstellung nanokeramischer Verschleißschutzschichten auf temperaturempfindlichen Substraten, III, 182 S. : Ill., graph. Darst., 2015

Hawelka, Dominik

[Doktorarbeit]
Wave front sensor based on digital mirror matrix for functional characterization of freeform ophthalmic optics, IX, 137 S. : Ill., graph. Darst., 2015

Stürwald, Stephan

[Doktorarbeit]
Effizienz- und Qualitätssicherung bei der Lasermikrobearbeitung mit UKP-Lasern durch neue optische Systemtechnik, V, 167 S. : Ill., graph. Darst., 2015

Eifel, Stephan

[Fachzeitschriftenartikel]
(pH)aser : PLA-Fasern mit optimiertem Abbauverhalten
In: Mitteilungen des Institutes für Textiltechnik der Rheinisch-Westfälischen Technischen Hochschule Aachen, 61, 108, 2014

Fehér, Katalin
Vogt, Felix
Bürgermeister, Lisa
Pich, Andrij
Lopez, Christina
et al.

[Fachzeitschriftenartikel]
Measuring Method for the Interference Contrast of Multi-Beam-Interference
In: Journal of Laser Micro/Nanoengineering, 9 (3), 225-229, 2014
[DOI: 10.2961/jlmn.2014.03.0008]

Steger, Michael
Boes, Simon
Thilker, Sven
Gillner, Arnold

[Beitrag zu einem Tagungsband]
Plasma expansion during laser structuring of metals with ps pulse bursts
In: [The First Smart Laser Processing Conference 2014, SLPC2014, 22.04.2014-24.04.2014, Yokohama, Japan], 2014

Hartmann, Claudia
Gillner, A.

[Beitrag zu einem Tagungsband]
Method for measuring the interference contrast of Multi-Beam-Interference
In: [The First Smart Laser Processing Conference 2014, SLPC2014, 22.04.2014-24.04.2014, Yokohama, Japan], 2014

Steger, M.
Boes, S.
Thilker, S.
Gillner, A.

[Fachzeitschriftenartikel]
The Additive Manufacture of Patient-tailored Finger Implants : Feasibility study: implants based on XtremeCT technique
In: Laser-Technik-Journal, 11 (2), 54-56, 2014
[DOI: 10.1002/latj.201400029]

Merkt, Simon
Kleyer, Arnd
Hueber, Axel J.

[Abstract, Buchbeitrag, Beitrag zu einem Tagungsband]
Economic Implications of 3D Printing : Market Structure Models Revisited
In: Academy of Management proceedings. - 2014, Meeting Abstract Supplement, 2014
[DOI: 10.5465/AMBPP.2014.10947abstract]

Weller, Christian
Kleer, Robin
Piller, Frank Thomas
Hinke, Christian

[Fachzeitschriftenartikel]
Laser-induced drug release for local tumor control : a proof of concept
In: Journal of surgical research, 192 (2), 312-316, 2014
[DOI: 10.1016/j.jss.2014.07.036]

Lambertz, Andreas
Klink, Christian D.
Röth, Anjali
Schmitz, Dominik
Pich, Andrij
et al.

[Fachzeitschriftenartikel]
Laserdurchstrahlschweißen : Klarsicht schaffen mit neuen Wellenlängen
In: Labo : Analytik, Labortechnik, Life Sciences, ? (5), 36-37, 2014

Mamuschkin, Viktor

[Konferenzbeitrag]
Selective Laser Melting am Fraunhofer-Institut für Lasertechnik
In: 4. ULT-Symposium: Lufttechnik für neue Technologien Löbau, 2014

Schrage, Johannes

[Konferenzbeitrag]
Additive Manufacturing with SLM and LMD
In: Forum Produktion Nordwest 2014 Papenburg 2014-06-17 - 2014-06-18, 2014

Schrage, Johannes

[Konferenzbeitrag]
Aktuelle Entwicklungstrends in der Lasertechnik
In: International Laser Technology Congress Aachen 2014-05-07 - 2014-05-09, 2014

Hinke, Christian

[Konferenzbeitrag]
Scalability of the mechanical properties of slm produced micro-struts
In: 33rd International Congress on Applications of Lasers & Electro-Optics San Diego, CA 2014-10-19 - 2014-10-23, 2014

Bültmann, Jan
Merkt, Simon
Hammer, Christine
Hinke, Christian
Prahl, Ulrich

[Buchbeitrag]
Scientific Cooperation Engineering in the Cluster of Excellence Integrative Production Technology for High-Wage Countries at RWTH Aachen University
In: Automation, Communication and Cybernetics in Science and Engineering 2013/2014 / edited by Sabina Jeschke, Ingrid Isenhardt, Frank Hees, Klaus Henning, 103-109, 2014
[DOI: 10.1007/978-3-319-08816-7_9]

Jooß, Claudia
Welter, Florian
Leisten, Ingo
Richert, Anja
Schaar, Anne Kathrin
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Drilling of cooling holes by using high power ultrashort pulsed laser radiation
In: Journal of laser applications : JLA, 27 (S2), 688, 2014
[DOI: 10.2351/1.5063117]

Uchtmann, Hermann
Friedrichs, Marcel
Kelbassa, Ingomar

[Beitrag zu einem Tagungsband]
Managing relationships in interdisciplinary research projects - the HoQ experience
In: Conference Proceedings of the 13th International Science-to- Business Marketing Conference on Cross Organizational Value Creation, 202-211, 2014

Siems, Florian
Papen, Marie-Christin
Hütten, Antje S. J.
Niemand, Thomas
Walcher, D.
et al.

[Fachzeitschriftenartikel]
Fractional Talbot lithography with extreme ultraviolet light
In: Optics letters, 30 (24), 6969-6972, 2014
[DOI: 10.1364/OL.39.006969]

Kim, Hyun-su
Li, Wei
Danylyuk, Serhiy
Brocklesby, William S.
Marconi, Mario C.
et al.

[Fachzeitschriftenartikel, Poster]
Infrared subsurface imaging of nanoparticles embedded in textile fibres
In: Mitteilungen / Institut für Textiltechnik, 60.2013, 019, 2014

van Munster, Alfred
Hauer, Benedikt
Glauß, Benjamin
Steinmann, Wilhelm
Beckers, Markus
et al.

[Beitrag zu einem Tagungsband]
In-situ measurement of the focal position in one and ten micron laser cutting
In: Proceedings 33rd ICALEO International Congress on Applications of Lasers & Electro–Optics, October 19-23, 2014, San Diego, Calif., USA, Paper 179, 4 S., 2014

Thombansen, Ulrich
Hermanns, Torsten

[Beitrag zu einem Tagungsband]
Comparison of geometrical properties of parts manufactured by powder bed based (SLM) and powder fed based (LMD) laser additive manufacturing technologies
In: Proceedings 33rd International Congress on Applications of Lasers & Electro-Optics: (ICALEO); October 19-23, 2014, San Diego/Calif, Paper 1502, 6 S., 2014

Alkhayat, Moritz
Khavkin, Evgenij
Gasser, Andres
Meiners, Wilhelm
Kelbassa, Ingomar

[Beitrag zu einem Tagungsband]
Laser based functionalization for graded immobilization of biomolecules on biocompatible polymer surfaces
In: Nanobio Europe, Münster, Germany, June 2-4, 2014. 10th Int. Congr. & Exhibition on Nanobiotechnology, 41, 2014

Nottrodt, Nadine
Leonhäuser, Dorothea
Elling, Lothar
Bremus-Köbberling, Elke
Gillner, Arnold

[Fachzeitschriftenartikel]
Schnelle numerische Methoden für die effiziente Temperaturfeldberechnung in bauteilnahen Geometrien und Mehrlagenschweißungen
In: Schweissen und Schneiden, 66 (1/2), 34-37, 2014

Schulz, Wolfgang
Nießen, Markus
Wollschlaeger, Jeremias
Jansen, Ulrich
Pittner, Andreas
et al.

[Beitrag zu einem Tagungsband]
Setup and maintenance of manufacturing quality in CO2 laser cutting
In: 2nd ICRM 2014 International Conference on Ramp-Up Management. - 20, 98-102, 2014
[DOI: 10.1016/j.procir.2014.05.037]

Thombansen, Ulrich
Hermanns, Torsten
Stoyanov, Stoyan

[Beitrag zu einem Tagungsband]
Surface structuring by remelting of Titanium alloy TI6AL4V
In: Proceedings 33rd International Congress on Applications of Lasers & Electro-Optics : (ICALEO) ; October 19-23, 2014, San Diego/Calif., Paper ID 1401, 10 S., 2014

Temmler, André
Walochnik, Martin A.
Willenborg, Edgar
Wissenbach, Konrad

[Fachzeitschriftenartikel]
Fertigen und Instandsetzen mit generativen Laserverfahren
In: Maschinenmarkt : MM, 38, 44-47, 2014

Gasser, Andres

[Fachzeitschriftenartikel]
Generation of circularly polarized radiation from a compact plasma-based extreme ultraviolet light source for tabletop X-ray magnetic circular dichroism studies
In: Review of scientific instruments : RSI, 85 (10), 103110, 2014
[DOI: 10.1063/1.4897491]

Wilson, Daniel
Rudolf, Denis
Weier, Christian
Adam, Roman
Winkler, Gerrit
et al.

[Fachzeitschriftenartikel]
Dynamics of ultrashort pulsed laser radiation induced non-thermal ablation of graphite
In: Applied physics / A, Materials science & processing, 117 (4), 1873-1878, 2014
[DOI: 10.1007/s00339-014-8864-7]

Reininghaus, Martin
Kalupka, Christian
Faley, Olga
Holtum, Tim
Finger, Johannes-Thomas
et al.

[Beitrag zu einem Tagungsband]
Comparison of edge emitter and vertical emitter based diode lasers for materials processing
In: Proceedings 33rd International Congress on Applications of Lasers & Electro-Optics : (ICALEO) ; October 19-23, 2014, San Diego/Calif., Paper 304 (9 S.), 2014

Hengesbach, Stefan
Hoffmann, Dieter
Traub, Martin
Poprawe, Reinhart

[Fachzeitschriftenartikel]
LMDCAM, Computer Aided Manufacturing (CAM) Solution for Tool Path Generation for Build-up of Complex Aerospace Components by Laser Metal Deposition (LMD)
In: Lasers in engineering, 28 (5/6), 279-287, 2014

Flemmer, J.
Pirch, N.
Gasser, A.
Wissenbach, K.
Kelbassa, I.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Handheld chemical analysis with laser for recycling applications
In: Sensor-Based Sorting 2014 : A joint conference of RWTH Aachen, Department of Processing and Recycling and GDMB. March 11-13, 2014 in Aachen / Ed.: GDMB Gesellschaft der Metallurgen und Bergleute e.V. ; Ulrich Waschki, 107-115, 2014

Scharun, Michael
Fricke-Begemann, Cord

[Fachzeitschriftenartikel]
3D-Druck und Biofabrikation : Photonische Prozesse in der Medizintechnik
In: RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2014 (1), 42-45, 2014

Jauer, Lucas
Leonards, Holger

[Fachzeitschriftenartikel]
Einsatzmöglichkeiten des Laserauftragschweißens und des Selektiven Laserschmelzen im Werkzeugbau für Bauteile aus Kupfer im Bereich der Spritzgießtechnik
In: Metall, 2014 (11), 456-458, 2014

Maischner, Dora
Ocylok, Sörn
Becker, David
Weisheit, Andreas

[Beitrag zu einem Tagungsband]
Laser beam welding of high manganese TWIP steels produced by twin roll strip casting
In: High manganese steels 2014 : the 2nd international conference ; 31 August - 04 September 2014, Aachen, Germany ; proceedings / [IEHK Steel Institute, RWTH Aachen University and Max-Planck-Institut für Eisenforschung (MPIE). Wolfgang Bleck, ... (ed.)], 4 S., 2014

Dahmen, Martin
Daamen, Marcus
Hirt, Gerhard

[Fachzeitschriftenartikel]
Laser metal deposition and selective laser melting of Fe-28 at.% Al
In: Journal of materials research : JMR, 29 (17), 2036-2043, 2014
[DOI: 10.1557/jmr.2014.131]

Rolink, Gesa
Vogt, Sabrina
Sencekova, Lucia
Weisheit, Andreas
Poprawe, Reinhart
et al.

[Fachzeitschriftenartikel]
Investigations of laser clad, thermal sprayed and laser remelted AlSi20-coatings on magnesium alloy AZ31B under constant and cycling thermal load
In: Surface & coatings technology, 259 (Pt. C), 751-758, 2014
[DOI: 10.1016/j.surfcoat.2014.09.049]

Rolink, Gesa
Weisheit, Andreas
Biermann, Tim
Bobzin, Kirsten
Öte, Mehmet
et al.

[Buchbeitrag]
Zukunftsweisendes Forschungsprojekt
In: b on top. - 2014, 44-47, 2014

Stollenwerk, Jochen Hugo
Loosen, Peter

[Fachzeitschriftenartikel]
Mit Kunststoff in die optische Zukunft : die gesamte Prozesskette für optische Kunststoffkomponenten konzentriert sich am Standort Aachen
In: Kunststoffe / [Deutsche Ausgabe], 2014 (10), 154-159, 2014

Hopmann, Christian
Brecher, Christian
Loosen, Peter
Röbig, Malte
Meiers, Bernd
et al.

[Fachzeitschriftenartikel]
Neue Prozesskette für faserverstärkte Thermoplaste
In: wt Werkstattstechnik online, 104 (9), 575-580, 2014

Hopmann, Christian
Böttcher, Arne
van der Straeten, Kira
Riedel, Regina
Schneider, Frank
et al.

[Fachzeitschriftenartikel]
Near-field imaging and spectroscopy of locally strained GaN using an IR broadband laser
In: Optics express, 22 (19), 22369-22381, 2014
[DOI: 10.1364/OE.22.022369]

Bensmann, Stefanie
Gaußmann, Fabian
Lewin, Martin
Wüppen, Jochen
Nyga, Sebastian
et al.

[Beitrag zu einem Tagungsband]
Measurement of cut front properties in laser cutting
In: 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 / ed by M. Schmidt, F. Vollertsen and M. Merklein, 885-891, 2014
[DOI: 10.1016/j.phpro.2014.08.107]

Thombansen, Ulrich
Hermanns, Torsten
Molitor, Thomas
Pereira, Milton
Schulz, Wolfgang

[Beitrag zu einem Tagungsband]
Illumination for process observation in laser material processing
In: 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 / ed by M. Schmidt, F. Vollertsen and M. Merklein, 1286-1296, 2014
[DOI: 10.1016/j.phpro.2014.08.053]

Thombansen, Ulrich
Ungers, Michael

[Beitrag zu einem Tagungsband]
Laser micro welding for ribbon bonding
In: 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 / ed by M. Schmidt, F. Vollertsen and M. Merklein, 776-781, 2014
[DOI: 10.1016/j.phpro.2014.08.085]

Mehlmann, Benjamin
Gehlen, Elmar
Olowinsky, Alexander
Gillner, Arnold

[Beitrag zu einem Tagungsband]
Correlations of melt pool geometry and process parameters during laser metal deposition by coaxial process monitoring
In: 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014 / ed by M. Schmidt, F. Vollertsen and M. Merklein, 228-238, 2014
[DOI: 10.1016/j.phpro.2014.08.167]

Ocylok, Sörn
Alexeev, Eugen
Mann, Stefan
Weisheit, Andreas
Wissenbach, Konrad
et al.

[Fachzeitschriftenartikel]
Physical and mathematical modeling of antimicrobial photodynamic therapy
In: Journal of biomedical optics, 19 (7), 071411, 2014
[DOI: 10.1117/1.JBO.19.7.071411]

Bürgermeister, Lisa
Romero López, Fernando
Schulz, Wolfgang

[Beitrag zu einem Tagungsband]
Power-scalable and efficient geometric XUV output coupling for cavity-enhanced high harmonic generation
In: CLEO 2104 - Laser Science to Photonic Applications : 08 Jun 2014 - 13 Jun 2014, San Jose, Calif., USA, 1-2, 2014
[DOI: 10.1364/CLEO_QELS.2014.FTu2D.3]

Holzberger, Simon
Högner, Maximilian
Weitenberg, Johannes
Esser, Dominik
Eidam, Tino
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Automated alignment of fast-axis collimator lenses for high-power diode laser bars
In: High-power diode laser technology and applications XII : 2 - 4 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Mark S. Zediker, ed., 89650V, 6 S., 2014
[DOI: 10.1117/12.2041245]

Westphalen, Thomas
Hengesbach, Stefan
Holly, Carlo
Traub, Martin
Hoffmann, Dieter

[Fachzeitschriftenartikel]
Effect of pulse to pulse interactions on ultra-short pulse laser drilling of steel with repetition rates up to 10 MHz
In: Optics express, 22 (15), 18790-18799, 2014
[DOI: 10.1364/OE.22.018790]

Finger, Johannes-Thomas
Reininghaus, Martin

[Buchbeitrag, Beitrag zu einem Tagungsband]
High-Power Dense Wavelength Division Multiplexing (HP-DWDM) of frequency stabilized 9xx diode laser bars with a channel spacing of 1.5 nm
In: High-power diode laser technology and applications XII : 2 - 4 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Mark S. Zediker, ed., 89650C, 9 S., 2014
[DOI: 10.1117/12.2036974]

Hengesbach, Stefan
Holly, Carlo
Krauch, Niels
Witte, Ulrich
Westphalen, Thomas
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Numerical analysis of external feedback concepts for spectral stabilization of high-power broad-area semiconductor lasers
In: High-power diode laser technology and applications XII : 2 - 4 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Mark S. Zediker, ed., 89650K, 8 S., 2014
[DOI: 10.1117/12.2037053]

Holly, Carlo
Hengesbach, Stefan
Traub, Martin
Hoffmann, Dieter

[Beitrag zu einem Tagungsband]
Automatic design of multi-lens optical systems based on stock lenses for high power lasers
In: Optical Fabrication and Testing : Fabrication Process Technology I ; Kohala Coast, Hawaii, United States, June 22-26, 2014, 2 S., 2014
[DOI: 10.1364/IODC.2014.IW1A.6]

Traub, Martin
Hoffmann, Dieter
Hengesbach, Stefan
Loosen, Peter

[Beitrag zu einem Tagungsband]
Highlights of the 1st Conference on Laser Polishing LaP 2014, Aachen, Germany
In: Optical Fabrication and Testing : Fabrication Process Technology I ; Kohala Coast, Hawaii, United States, June 22-26, 2014, OTu1B.1, 3 S., 2014
[DOI: 10.1364/OFT.2014.OTu1B.1]

Willenborg, Edgar
Heidrich, Sebastian
Temmler, André

[Beitrag zu einem Tagungsband]
Polishing and form correction with laser radiation
In: Optical Fabrication and Testing : Fabrication Process Technology I ; Kohala Coast, Hawaii, United States, June 22-26, 2014, OTu1B.4, 3 S., 2014
[DOI: 10.1364/OFT.2014.OTu1B.4]

Heidrich, Sebastian
Weingarten, Christian
Willenborg, Edgar
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Deposition welding of hot forging dies using nanoparticle reinforced weld metal
In: Production engineering, 8 (5), 645-658, 2014
[DOI: 10.1007/s11740-014-0562-y]

Behrens, Bernd-Arno
Yilkiran, Timur
Ocylok, Sörn
Weisheit, Andreas
Kelbassa, Ingomar

[Buchbeitrag, Beitrag zu einem Tagungsband]
Automatic design of multi-lens optical systems based on stock lenses for high power lasers
In: International Optical Design Conference 2014 : Kohala Coast, Hawaii, United States June 22, 2014 / Mariana Figueiro; Scott Lerner; Julius Muschaweck; John Rogers, 8 S., 2014
[DOI: 10.1117/12.2074508]

Traub, Martin
Hoffmann, Dieter
Hengesbach, Stefan
Loosen, Peter

[Fachzeitschriftenartikel]
Selective, laser induced etching of fused silica at high scan-speeds using KOH
In: Journal of laser micro/nanoengineering, 9 (2), 126-131, 2014
[DOI: 10.2961/jlmn.2014.02.0009]

Hermans, Martin
Gottmann, Jens
Riedel, FRank

[Fachzeitschriftenartikel]
CAx process chain for automated laser drilling of tool molds
In: Journal of Mechanics Engineering und Automation, 4 (5), 427-431, 2014

Uchtmann, Hermann
Kelbassa, Ingomar

[Fachzeitschriftenartikel]
Fabrication of nano-TiCp reinforced Inconel 625 composite coatings by partial dissolution of micro-TiCp through laser cladding energy input control
In: Surface & coatings technology, 249, 125-131, 2014
[DOI: 10.1016/j.surfroat.2014.03.057]

Jiang, Dafa
Hong, Chen
Zhong, Minlin
Alkhayat, Moritz
Weisheit, Andreas
et al.

[Beitrag zu einem Tagungsband]
Laser beam welding of new ultra-high strength and supra-ductile steels
In: Future trends in steel development, processing technologies and applications : bringing the automotive, supplier and steel industries together ; SCT2014 ; [the 4th International Conference on Steels in Cars and Trucks, 2014, took place from June 15 to 19 in Braunschweig, Germany] / ed. by Hans-Joachim Wieland, Stefanie Brockmann and TEMA, Technologie Marketing AG, 282-289, 2014

Dahmen, Martin
Daamen, Markus
Janzen, Vitalij
Lindner, Stefan
Schneider, Armin
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Investigations on laser transmission welding of absorber-free thermoplastics
In: Laser-based micro- and nanoprocessing VIII : 4 - 6 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Udo Klotzbach ..., ed., 896815, 9 S., 2014
[DOI: 10.1117/12.2039703]

Mamuschkin, Viktor
Olowinsky, Alexander
Britten, Simon W.
Engelmann, Christoph

[Fachzeitschriftenartikel]
Fabrication of nanoparticulate reinforced metal matrix composites by laser cladding
In: Journal of laser applications : JLA, 26 (2), 022007, 2014
[DOI: 10.2351/1.4867735]

Zhong, Minlin
Jiang, Dafa
Zhang, Hongjun
Hong, Chen
Weisheit, Andreas
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Tracking the course of the manufacturing process in selective laser melting
In: High-power laser materials processing: lasers, beam delivery, diagnostics, and applications III : 4 - 6 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Friedhelm Dorsch, ed., 89630O, 7 S., 2014
[DOI: 10.1117/12.2040330]

Thombansen, Ulrich
Gatej, Alexander
Pereira, M.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Cognition for robot scanner based remote welding
In: High-power laser materials processing: lasers, beam delivery, diagnostics, and applications III : 4 - 6 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Friedhelm Dorsch, ed., 89630N, 8 S., 2014
[DOI: 10.1117/12.2040275]

Thombansen, Ulrich
Ungers, Michael

[Buchbeitrag, Beitrag zu einem Tagungsband]
Methods for compensation of thermal lensing based on Thermo Optical (TOP) Analysis
In: Optical Modelling and Design III : 15–17 April 2014, Brussels, Belgium / Frank Wyrowski; John T. Sheridan; Jani Tervo; Youri Meuret, eds., 91310F, 8 S., 2014
[DOI: 10.1117/12.2052203]

Gatej, Alexander
Loosen, Peter

[Beitrag zu einem Tagungsband]
Thermal limitations for power scaling of femtosecond enhancement cavities
In: High Intensity Lasers and High Field Phenomena : Messe Berlin, Berlin Germany, March 18-20, 2014, HTu1C.6, 3 S., 2014
[DOI: 10.1364/HILAS.2014.HTu1C.6]

Carstens, H.
Lilienfein, N.
Holzberger, Simon
Jocher, C.
Eidam, T.
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Design, alignment and applications of optical systems for parallel processing with ultra-short laser pulses
In: Optical Modelling and Design III : 15–17 April 2014, Brussels, Belgium / Frank Wyrowski; John T. Sheridan; Jani Tervo; Youri Meuret, eds., 91310C, 12 S., 2014
[DOI: 10.1117/12.2051614]

Büsing, Lasse
Eifel, Stephan
Loosen, Peter

[Fachzeitschriftenartikel]
Megawatt-scale average-power ultrashort pulses in an enhancement cavity
In: Optics letters, 39 (9), 2595-2598, 2014
[DOI: 10.1364/OL.39.002595]

Carstens, H.
Lilienfein, N.
Holzberger, Simon
Jocher, C.
Eidam, T.
et al.

[Fachzeitschriftenartikel]
Microstructure and residual stresses of laser remelted surfaces of a hot work tool steel
In: International journal of materials research : IJMR, 105 (4), 328-336, 2014
[DOI: 10.3139/146.111027]

Preussner, Johannes
Oeser, Sabine
Pfeiffer, Wulf
Temmler, Andre
Willenborg, Edgar

[Buchbeitrag, Beitrag zu einem Tagungsband]
High power electrically pumped VECSEL and arrays
In: Vertical external cavity surface emitting lasers (VECSELs) IV : 2 - 4 February 2014, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored and publ. by SPIE. Jerome V. Moloney, ed., 89660H, 10 S., 2014
[DOI: 10.1117/12.2037578]

Mönch, Holger
Andreadaki, Anastasia
Gronenborn, Stephan
Kolb, Johanna
Loosen, Peter
et al.

[Fachzeitschriftenartikel]
Optics manufacturing by laser radiation
In: Optics and lasers in engineering, 59, 34-40, 2014
[DOI: 10.1016/j.optlaseng.2014.03.001]

Heidrich, Sebastian
Richmann, Annika
Schmitz, Patrick
Willenborg, Edgar
Wissenbach, Konrad
et al.

[Fachzeitschriftenartikel]
Mit Licht : flexibel und dicht
In: Pack-Report : das Fachmagazin für industrielles Verpacken, 2014 (03), 46-49, 2014

Jänchen, Ralph
Brosda, Maximilian
Wendt, Gregor
Olowinsky, Alexander

[Fachzeitschriftenartikel]
Designing optical free-form surfaces for extended sources
In: Optics express, 22 (S2), A552-A560, 2014
[DOI: 10.1364/OE.22.00A552]

Wester, Rolf
Müller, Gideon
Völl, Annika
Berens, Michael
Stollenwerk, Jochen Hugo
et al.

[Fachzeitschriftenartikel]
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
In: Journal of laser applications : JLA, 26 (1), 012004, 2014
[DOI: 10.2351/1.4828755]

Buchbinder, Damien
Meiners, Wilhelm
Pirch, Norbert
Wissenbach, Konrad
Schrage, Johannes

[Fachzeitschriftenartikel]
Laser-induced breakdown spectroscopy expands into industrial applications
In: Spectrochimica acta / B, Atomic spectroscopy, 93, 41-51, 2014
[DOI: 10.1016/j.sab.2014.02.001]

Noll, Reinhard
Fricke-Begemann, Cord
Brunk, Markus
Connemann, Sven
Meinhardt, Christoph
et al.

[Fachzeitschriftenartikel]
Cavity-enhanced high-harmonic generation with spatially tailored driving fields
In: Physical review letters : PRL, 112 (10), 103902, 2014
[DOI: 10.1103/PhysRevLett.112.103902]

Pupeza, Ioachim
Högner, M.
Weitenberg, Johannes
Holzberger, Simon
Esser, Dominik
et al.

[Fachzeitschriftenartikel]
Ultrafast reflection and secondary ablation in laser processing of transparent dielectrics with ultrashort pulses
In: Optical engineering, 53 (5), 051512, 2014
[DOI: 10.1117/1.OE.53.5.051512]

Sun, Mingying
Eppelt, Urs
Schulz, Wolfgang
Zhu, Jianqiang

[Fachzeitschriftenartikel]
A computational reduction model for appraising structural effects in selective laser melting manufacturing : a methodical model reduction proposed for time-efficient finite element analysis of larger components in Selective Laser Melting
In: Virtual and Physical Prototyping, 9 (1), 17-25, 2014
[DOI: 10.1080/17452759.2013.868005]

Papadakis, Loucas
Loizou, Andreas
Risse, Jeroen
Bremen, Sebastian
Schrage, Johannes

[Fachzeitschriftenartikel]
Combined strengthening of multi-phase and graded interface in laser additive manufactured TiC/Inconel 718 composites
In: Journal of physics / D, Applied physics, 47 (4), 045309, 2014
[DOI: 10.1088/0022-3727/47/4/045309]

Gu, Dongdong
Hong, Chen
Jia, Qingbo
Dai, Donghua
Gasser, Andres
et al.

[Fachzeitschriftenartikel]
Optical set-up for dynamic superposition of three laser beams for structuring and polishing applications
In: Optics express, 22 (2), 1387-1393, 2014
[DOI: 10.1364/OE.22.001387]

Temmler, André
Pütsch, Oliver
Stollenwerk, Jochen Hugo
Willenborg, Edgar
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
The contribution of virtual production intelligence to laser cutting planning processes
In: Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th, 2013 / edited by Michael F. Zaeh, 117-124, 2013

Reinhard, Rudolf
Al Khawli, Toufik
Eppelt, Urs
Meisen, Tobias
Schilberg, Daniel
et al.

[Doktorarbeit]
Bewertung und Optimierung laserbasierter Fertigungsprozesse bei der Herstellung hocheffizienter Solarzellen, 199 S. : Ill., graph. Darst., 2014

Baier, Tobias

[Doktorarbeit]
Modeling and compensation of thermally induced optical effects in highly loaded optical systems, 162 S. : Ill., graph. Darst., 2014

Gatej, Alexander

[Doktorarbeit]
Faserlaserbasierte Direktanalyse von Metall-Legierungen, III, 143 S. : Ill., graph. Darst., 2014

Scharun, Michael

[Doktorarbeit]
Mikro- und Nanostrukturierung von Polymeroberflächen mittels Mehrstrahl-Laserinterferenz-Technik, VI, 127 S. : Ill., graph. Darst., 2014

Beckemper, Stefan

[Doktorarbeit]
Spektrale Stabilisierung und inkohärente Überlagerung von Diodenlaserstrahlung mit Volumenbeugungsgittern, XIV, 177 S. : Ill., graph. darst., 2014

Hengesbach, Stefan

[Buch, Doktorarbeit]
Laserabtrag mit zeitlicher Modulation der Energiedeposition, II, 157 S. : Ill., graph. Darst., 2014

Hartmann, Claudia

[Doktorarbeit]
Laserbasiertes Fügeverfahren zur Herstellung von Kunststoff-Metall-Hybridbauteilen, III, 147 S. : Ill., graph. Darst., 2014

Rösner, Andreas

[Beitrag zu einem Tagungsband]
High Density Perforation of Thin Al-Foils with Ultra Short Pulse Lasers
In: LAMP2013: The 6th International Congress on Laser Advanced Materials Processing ; LPM2013, the 14th International Symposium on Laser Precision Microfabrication ; HPL2013, the 6th International Symposium on High Power Laser Processing ; Niigata, July 23 -26th, 2013 ; [congress program & technical digest], 2013

Hartmann, C.
Hambach, N.
Jüngst, M.
Keller, S.
Holtkamp, J.
et al.

[Beitrag zu einem Tagungsband]
Fabrication of Hierarchical Structures by Direct Laser Writing and Multi-Beam-Interference
In: LAMP2013: The 6th International Congress on Laser Advanced Materials Processing ; LPM2013, the 14th International Symposium on Laser Precision Microfabrication ; HPL2013, the 6th International Symposium on High Power Laser Processing ; Niigata, July 23 -26th, 2013 ; [congress program & technical digest], 2013

Steger, M.
Hartmann, C.
Beckemper, S.
Holtkamp, J.
Gillner, A.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Analysis of the Process Chain for the Production of Optical Functional Micro Structures by Injection Moulding
In: 4M 2013 : Proceedings of the 10th International Conference on Multi-Material Micro Manufacture ; 8-10 October, San Sebastián, Spain, 2013
[DOI: 10.3850/978-981-07-7247-5-365]

Hopmann, Christian
Schöngart, Maximilian
Bobzin, Kirsten
Bagcivan, Nazlim
Brögelmann, Tobias
et al.

[Fachzeitschriftenartikel]
A novel approach for temperature control in ISF supported by laser and resistance heating
In: The international journal of advanced manufacturing technology, 67 (9), 2195-2205, 2012
[DOI: 10.1007/s00170-012-4640-z]

Göttmann, A.
Bailly, D.
Bergweiler, Georg Albert
Bambach, M.
Stollenwerk, J.
et al.

[Buchbeitrag]
Digital Photonic Production : Shaping the Future by Individualized Production
In: Photonics in Germany. - 2013, 2013

Poprawe, Reinhart
Hinke, Christian

[Konferenzbeitrag]
Digital Photonic Production : A new Industrial Revolution?
In: Manufacturing Performance Days Tampere 2013-06-10 - 2013-06-12, 2013

Hinke, Christian

[Konferenzbeitrag]
Digital Photonic Production : Optimization potentials by Laser based manufacturing
In: European Altair Technology Conference Turin 2013-04-22 - 2013-04-24, 2013

Merkt, Simon
Hinke, Christian

[Konferenzbeitrag]
Lasergestützter Leichtbau in der Automobilindustrie und Selective Laser Melting
In: TecNet Leichtbau Workshop Ditzingen, 2013

Hinke, Christian

[Konferenzbeitrag]
Rapid Prototyping : generative Methoden
In: Fraunhofer Leichtbau Tagung Dresden Dresden 2013-02-05 - 2013-02-06, 2013

Wissenbach, Konrad
Meiners, Wilhelm
Merkt, Simon
Hinke, Christian

[Buchbeitrag]
Sensor-Integrated Alignment of Micro-optical Components for Planar Assembly
In: Precision Engineering, 2013

Morasch, Valentin
Haag, Sebastian
Gatej, Alexander
Loosen, Peter
Brecher, Christian

[Beitrag zu einem Tagungsband]
Self-optimizing Approach for the Alignment of Optical Components
In: [International Symposium on Measurement Technology and Intelligent Instruments, ISMTII, 01.07.2013-05.07.2013, Aachen, Germany], 2013

Holters, Martin
Gatej, Alexander
Haag, Sebastian
Müller, Tobias
Loosen, Peter
et al.

[Konferenzbeitrag]
Fab Labs : A Blueprint for Decentral Production? ; 3D Printing Technology Landscape for Digital Manufacturing Workshops
In: FabLabCon 2013 Aachen 2013-09-09 - 2013-09-09, 2013

Weller, C.
Merkt, Simon
Bremen, Sebastian
Hinke, Christian

[Abstract, Beitrag zu einem Tagungsband]
Direct low-harmonic generation in gas at MHz repetition rate
In: Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC) : 2013 Conference on and International Quantum Electronics Conference ; Munich 12-16 May 2013, 1 S., 2013
[DOI: 10.1109/CLEOE-IQEC.2013.6800880]

Petraviciute-Lötscher, Lauryna
Schneider, Waldemar
Rußbüldt, Peter
Gronloh, Bastian
Hoffmann, Hans-Dieter
et al.

[Fachzeitschriftenartikel]
Verfahrensvariantenvergleich und Prozessmodellierung beim Laserdurchstrahlschweißen zur Vereinfachung der Prozessqualifizierung und -auswahl
In: Joining plastics = Fügen von Kunststoffen, 7 (3), 160-168, 2013

Hopmann, Christian
Poprawe, Reinhart
Russek, Ulrich A.
Sooriyapiragasam, Suveni
Weber, Mathias
et al.

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Improving surface properties by laser-based drying, gelation, and densification of printed sol-gel coatings
In: Journal of coatings technology and research : JCTR, 11 (1), 3-10, 2013
[DOI: 10.1007/s11998-013-9516-0]

Hawelka, Dominik
Stollenwerk, Jochen Hugo
Pirch, Norbert
Wissenbach, Konrad
Loosen, Peter

[Fachzeitschriftenartikel]
Finding selective markets, additive manufacturing becomes competitive
In: Laser focus world, 49 (12), 59-59, 2013

Chang, Milton
Kelbassa, Ingomar

[Fachzeitschriftenartikel]
The Voxel Onset Time as a Method for the Evaluation of Two Photon Lithography
In: Journal of laser micro/nanoengineering, 8 (3), 230-233, 2013
[DOI: 10.2961/jlmn.2013.03.0008]

Engelhardt, Sascha
Tempeler, Jenny
Gillner, Arnold
Wehner, Martin

[Beitrag zu einem Tagungsband]
High brightness diode laser module in the red spectral range for pumping applications
In: Proceedings of the 2013 High Power Diode Lasers and Systems Conference (HPD) : Co-located with Photonex 2013, Ricoh Arena, Coventry, United Kingdom 16th and 17th October 2013 / Organised by the Scottish Chapter of the IEEE Photonics Society, 30-31, 2013
[DOI: 10.1109/HPD.2013.6706603]

Witte, Ulrich
Hengesbach, Stefan
Traub, Martin
Strotkamp, Michael
Jungbluth, Bernd
et al.

[Beitrag zu einem Tagungsband]
Design of a DFB/DBR diode laser module including spectral multiplexing based on VBGs
In: Proceedings of the 2013 High Power Diode Lasers and Systems Conference (HPD) : Co-located with Photonex 2013, Ricoh Arena, Coventry, United Kingdom 16th and 17th October 2013 / Organised by the Scottish Chapter of the IEEE Photonics Society, 16-17, 2013
[DOI: 10.1109/HPD.2013.6706596]

Hengesbach, Stefan
Witte, Ulrich
Traub, Martin
Hoffmann, Dieter

[Fachzeitschriftenartikel]
Fabrication and spectral tuning of standing gold infrared antennas using single fs-laser pulses
In: Optics express, 21 (26), 32176-32183, 2013
[DOI: 10.1364/OE.21.032176]

Reininghaus, Martin
Wortmann, Dirk
Cao, Zhao
Hoffmann, Jón Mattis
Taubner, Thomas

[Fachzeitschriftenartikel]
Fabrication of hierarchical structures by direct laser writing and multi-beam-interference
In: Journal of laser micro/nanoengineering, 8 (3), 210-215, 2013
[DOI: 10.2961/jlmn.2013.03.0005]

Steger, Michael
Hartmann, Claudia
Beckemper, Stefan
Holtkamp, Jens
Gillner, Arnold

[Fachzeitschriftenartikel]
High density perforation of thin Al-foils with ultra short pulse lasers
In: Journal of laser micro/nanoengineering, 8 (3), 266-270, 2013
[DOI: 10.2961/jlmn.2013.03.0013]

Hartmann, Claudia
Hambach, Nelli
Jüngst, Michael
Keller, Stephan
Holtkamp, Jens
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Tabletop coherent diffraction imaging with a discharge plasma EUV source
In: X-ray lasers and coherent x-ray sources: development and applications X : 27 - 29 August 2013, San Diego, California, USA ; [part of SPIE optics + photonics] / sponsored and publ. by SPIE. Annie Klisnick ..., ed.. - 8849, 8849 0Y, 2013
[DOI: 10.1117/12.2023895]

Juschkin, Larissa
Lötgering, Lars
Rudolf, Denis
Xu, Rui
Brose, Sascha
et al.

[Fachzeitschriftenartikel]
Präzision bei 210 km/h : Laserabstandssensoren messen die Dicke von Walzbändern
In: Qualität und Zuverlässigkeit : QZ, 58 (10), 44-47, 2013

Noll, Reinhard
Hölters, Stefan
Kämmerling, Jann
Lenenbach, Achim

[Beitrag zu einem Tagungsband]
Durchgängige Prozessparameterintegration im Druckgusswesen
In: Elektrische Automatisierung - Systeme und Komponenten : internationale Fachmesse und Kongress ; SPS IPC Drives, Nürnberg, 26.-28.11.2013 ; [Tagungsband] / Veranst.: Mesago Messemanagement GmbH, Stuttgart. [Hrsg.: Georg Frey ...], 165-174, 2013

Rix, Michael
Hoffmann, Max
Eibisch, Harald
Jeschke, Sabina

[Abstract, Beitrag zu einem Tagungsband]
Measurement of process variables in melt based manufacturing processes
In: ISMTII 2013 : 11th International Symposium on Measurement Technology and Intelligent Instruments ; Metrology - Master global challenges, July 1st - July 5th, 2013, RWTH, Aachen, Germany / Robert Schmitt; Harald Bosse (Eds.), 59-59, 2013

Thombansen, Ulrich
Purrio, Marion
Buchholz, Guido
Hermanns, Torsten
Molitor, Thomas
et al.

[Buchbeitrag]
Digital photonic production of 3D micro fluidics in glass by high speed micro scanner, 2013
[DOI: 10.1051/matecconf/20130805003]

Gottmann, Jens
Hermans, Martin
Ortmann, Jürgen

[Buchbeitrag]
Analyse von Sekundärrohstoffen durch mikrowellenunterstützte Laser-Emissionsspektroskopie
In: Innovative Technologien für Ressourceneffizienz in rohstoffintensiven Produktionsprozessen : zusammenfassende Darstellung der Ergebnisse der Fördermaßnahme 'r2 - innovative Technologien für Ressourceneffizienz - rohstoffintensive Produktionsprozesse' des Bundesministeriums für Bildung und Forschung (BMBF) / Jörg Woidasky ... (Hrsg.), 38-51, 2013

Scharun, Michael
Noll, Reinhard

[Beitrag zu einem Tagungsband]
Compressive behavior of lattice structures in solid shells manufactured by SLM
In: 14th NOLAMP Conference : The 14th Nordic Laser Materials Processing Conference ; Gothenburg, Sweden, August 26th - 28th, 2013 / Ed.: Alexander Kaplan ; Hans Engström, 91-100, 2013

Merkt, Simon
Hinke, Christian
Dalaee, Mohammad
Salminen, Antti
Purtonen, Tuomas
et al.

[Fachzeitschriftenartikel]
Digital photonic production and its emerging opportunities
In: LIA Today, 21 (4), 14-16, 2013

Hinke, Christian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Active optical system for laser structuring of 3D surfaces by remelting
In: Laser Beam Shaping XIV : San Diego, Calif., US, August 25, 2013 / Andrew Forbes, Todd E. Lizotte, 88430D, 8 S., 2013
[DOI: 10.1117/12.2023306]

Pütsch, Oliver
Temmler, André
Stollenwerk, Jochen Hugo
Willenborg, Edgar
Loosen, Peter

[Beitrag zu einem Tagungsband]
Selbstoptimierende Montage von Lasern unter Berücksichtigung von Bauteiltoleranzen
In: 114. Jahrestagung der DGaO : 21. bis 25. Mai 2013, Braunschweig / Deutsche Gesellschaft für angewandte Optik e. V., B36, 2 S., 2013

Holters, Martin
Loosen, Peter

[Fachzeitschriftenartikel]
39.1 µJ picosecond ultraviolet pulses at 355 nm with 1 MHz repeat rate
In: Optics letters, 38 (22), 4716-4718, 2013
[DOI: 10.1364/OL.38.004716]

Zhu, Peng
Li, Daijun
Liu, Qingyong
Chen, Jun
Fu, Shaojun
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
Broadly tunable, diode pumped Alexandrite laser
In: Advanced solid state lasers : 27 October - 1 November 2013, Paris, France / OSA, The Optical Society, Poster Session II (ATu3A), 2013

Strotkamp, Michael
Witte, Ulrich
Munk, Alexander
Hartung, Andrea
Gausmann, Stefan
et al.

[Beitrag zu einem Tagungsband]
Pulsed laser micro polishing of metals using dual-beam technology
In: Lasers in Manufacturing (LiM 2013) / ed. by C. Emmelmann, M.F. Zaeh, T. Graf and M. Schmidt, 346-355, 2013
[DOI: 10.1016/j.phpro.2013.03.087]

Nüßer, Christian
Sändker, Hendrik
Willenborg, Edgar

[Buchbeitrag, Beitrag zu einem Tagungsband]
Multiple intensity distributions from a single optical element
In: Nonimaging optics : efficient design for illumination and solar concentration X ; 12 - 14 August 2012, San Diego, California, United States ; [Nonimaging Optics Conference ; part of SPIE optics + photonics] / sponsored and publ. by SPIE. Roland Winston ..., ed., 88340M, 7 S., 2013
[DOI: 10.1117/12.2026516]

Berens, Michael
Bruneton, Adrien
Bäuerle, Axel
Traub, Martin
Wester, Rolf
et al.

[Fachzeitschriftenartikel]
Role of thermal ionization in internal modification of bulk borosilicate glass with picosecond laser pulses at high repetition rates
In: Optical materials express, 3 (10), 1716-1726, 2013
[DOI: 10.1364/OME.3.001716]

Sun, Mingying
Eppelt, Urs
Schulz, Wolfgang
Zhu, Jianqiang

[Fachzeitschriftenartikel]
Laser-manufactured mirrors for geometrical output coupling of intracavity-generated high harmonics
In: Optics express, 21 (22), 26797-26805, 2013
[DOI: 10.1364/OE.21.026797]

Esser, Dominik
Weitenberg, Johannes
Bröring, Wiebke
Pupeza, Ioachim
Holzberger, Simon
et al.

[Fachzeitschriftenartikel]
Produktivität bei der Laserpolitur deutlich steigern
In: wt Werkstattstechnik online, 103 (11/12), 1-5, 2013

Hauschild, D.
Kumstel, Judith
Willenborg, Edgar

[Beitrag zu einem Tagungsband]
Einfluss der Prozessführung auf die Rissbildung in mittels SLM hergestellten Bauteilen aus der Nickelbasislegierung IN738LC
In: Tagungsband / Fachmesse und Anwendertagung für Rapid-Technologie : Erfurt, 14. - 15. Mai 2013 = Proceedings / Trade Fair and User's Conference for Rapid Technology / Organisation: Messe Erfurt, 7 S., 2013

Risse, Jeroen
Golebiewski, Cyprian
Meiners, Wilhelm
Wissenbach, Konrad

[Buchbeitrag, Beitrag zu einem Tagungsband]
Laser fabricated nanoantennas for near-field applications
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, N302, 5 S., 2013

Finger, Johannes-Thomas
Reininghaus, Martin
Wortmann, Dirk
Cao, Zhao
Taubner, Thomas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Micro scale laser based additive manufacturing for metals
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, M101, 6 S., 2013

Schniedenharn, Maximilian
Belting, Matthias
Santos Batista, Rui Joao
Meiners, Wilhelm
Weisheit, Andreas

[Buchbeitrag, Beitrag zu einem Tagungsband]
Investigations on processing of carbon fiber reinforced plastics using ultrashort pulsed laser radiation with high average power
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, 1905, 6 S., 2013

Finger, Johannes-Thomas
Weinand, Marco
Wortmann, Dirk

[Buchbeitrag, Beitrag zu einem Tagungsband]
Determination of the bore hole diameter by analyzing process emissions
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, 701, 9 S., 2013

Janssen, Stefan
Uchtmann, Hermann
Kelbassa, Ingomar

[Buchbeitrag, Beitrag zu einem Tagungsband]
Cax process chain for laser drilling of tool molds
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, 702, 5 S., 2013

Uchtmann, Hermann
Kelbassa, Ingomar

[Buchbeitrag, Beitrag zu einem Tagungsband]
High precision 2.5D laser cutting of thin nitinol and polyurethane for medical applications
In: Congress proceedings / ICALEO, 32nd International Congress on Applications of Lasers & Electro-Optics, October 6 - 10, 2013, Hyatt Regency, Miami, Florida, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair Stefan Kaierle, M4154, 6 S., 2013

Zibner, Frank
Ryll, Joachim
Holtkamp, Jens
Gillner, Arnold

[Buchbeitrag]
A thermo-mechanical modeling reduction approach for calculating shape distortion in SLM manufacturing for aero engine components
In: High value manufacturing : Advanced Research in Virtual and Rapid Prototyping; Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, Leira, Portugal, 1-5 October, 2013 / editors, Paulo Jorge da Silva Bártolo ... [et al.], 613-618, 2013

Papadakis, L.
Loizou, A.
Risse, Jeroen
Bremen, Sebastian
Schrage, Johannes

[Buchbeitrag]
Processing of nickel based superalloy MAR M-247 by means of High-Temperature Selective Laser Melting (HT-SLT)
In: High value manufacturing : Advanced Research in Virtual and Rapid Prototyping; Proceedings of the 6th International Conference on Advanced Research and Rapid Prototyping, Leira, Portugal, 1-5 October, 2013 / editors, Paulo Jorge da Silva Bártolo ... [et al.], 291-295, 2013

Hagedorn, Yves-Christian
Risse, Jeroen
Meiners, Wilhelm
Pirch, Norbert
Wissenbach, Konrad
et al.

[Fachzeitschriftenartikel]
Deformation of ultra-short laser pulses by optical systems for laser scanners
In: Optics express, 21 (21), 24475-24482, 2013
[DOI: 10.1364/OE.21.024475]

Büsing, Lars
Bonhoff, Tobias
Gottmann, Jens
Loosen, Peter

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser-induced breakdown spectroscopy with multi-kHz fibre laser for mobile metal analysis tasks - A comparison of different analysis methods and with a mobile spark-discharge optical emission spectroscopy apparatus
In: Spectrochimica acta / B, Atomic spectroscopy, 87, 198-207, 2013
[DOI: 10.1016/j.sab.2013.05.007]

Scharun, Michael
Fricke-Begemann, Cord
Noll, Reinhard

[Buchbeitrag, Beitrag zu einem Tagungsband]
Opto-mechatronisches System zur Erzeugung prozessangepasster Intensitätsverteilungen für die Lasermaterialbearbeitung. Hrsg.: Burkhard Corves
In: Fachtagung Mechatronik 2013 : Aachen, (06.03. - 08.03.2013) ; [Tagungsband] / [VDI-Gesellschaft Produkt- und Prozessgestaltung (VDI-GPP) und VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (VDI/VDE-GMA)]. Hrsg.: T. Bertram ..., 253-257, 2013

Pütsch, Oliver
Bahrenberg, Lukas
Loosen, Peter

[Fachzeitschriftenartikel]
High-power dense wavelength division multiplexing of multimode diode laser radiation based on volume Bragg gratings
In: Optics letters, 38 (16), 3154-3157, 2013
[DOI: 10.1364/OL.38.003154]

Hengesbach, Stefan
Krauch, Niels
Holly, Carlo
Traub, Martin
Witte, Ulrich
et al.

[Fachzeitschriftenartikel]
Simulation of spectral stabilization of high-power broad-area edge emitting semiconductor lasers
In: Optics express, 21 (13), 15553-15567, 2013
[DOI: 10.1364/OE.21.015553]

Holly, Carlo
Hengesbach, Stefan
Traub, Martin
Hoffmann, Dieter

[Fachzeitschriftenartikel]
Werkzeugmaschine für das Laserpolieren
In: wt Werkstattstechnik online, 103 (6), 465-469, 2013

Willenborg, Edgar
Roß, Ingo
Kumstel, Judith
Flemmer, John

[Fachzeitschriftenartikel]
Compact high-repetition-rate source of coherent 100 eV radiation
In: Nature photonics, 7 (8), 608-612, 2013
[DOI: 10.1038/nphoton.2013.156]

Pupeza, Ioachim
Holzberger, Simon
Eidam, Tino
Carstens, Henning
Esser, Dominik
et al.

[Fachzeitschriftenartikel]
Laser triggered Z-pinch broadband extreme ultraviolet source for metrology
In: Applied physics letters, 102 (20), 203504, 2013
[DOI: 10.1063/1.4807172]

Tobin, I.
Juschkin, Larissa
Sidelnikov, Y.
O'Reilly, F.
Sheridan, P.
et al.

[Fachzeitschriftenartikel]
Low-Cost Infrared Resonant Structures for Surface-Enhanced Infrared Absorption Spectroscopy in the Fingerprint Region from 3 to 13 μm
In: The journal of physical chemistry / C, 117 (21), 11311-11316, 2013
[DOI: 10.1021/jp402383h]

Hoffmann, Jón Mattis
Yin, Xinghui
Richter, Jens
Hartung, Andrea
Maß, Tobias Wilhelm Wolfgang
et al.

[Fachzeitschriftenartikel]
Review on laser drilling I. Fundamentals, modeling, and simulation
In: Journal of laser applications : JLA, 25 (1), 012006, 2013
[DOI: 10.2351/1.4773837]

Schulz, Wolfgang
Eppelt, Urs
Poprawe, Reinhart

[Fachzeitschriftenartikel]
Limitations of the ray mapping approach in freeform optics design
In: Optics letters, 38 (11), 1945-1947, 2013
[DOI: 10.1364/OL.38.001945]

Bruneton, Adrien
Bäuerle, Axel
Wester, Rolf
Stollenwerk, Jochen Hugo
Loosen, Peter

[Abstract, Beitrag zu einem Tagungsband]
Development of infrared nearfield microscopy for the analysis of nanomodified fibres
In: 10th International Conference on Nanoscience and Nanotechnologies (NN13) : Abstract Book ; 9 - 12 July 2013, Thessaloniki, Greece, 159, 2013

Glauß, Benjamin
Beckers, Markus
Steinmann, Wilhelm
Seide, Gunnar Henrik
Gries, Thomas
et al.

[Fachzeitschriftenartikel]
Scalability limits of Talbot lithography with plasma-based extreme ultraviolet sources
In: Journal of micro/nanolithography, MEMS and MOEMS, 12 (3), 033002, 2013
[DOI: 10.1117/1.JMM.12.3.033002]

Danylyuk, Serhiy
Loosen, Peter
Bergmann, Klaus
Kim, Hyun-su
Juschkin, Larissa

[Fachzeitschriftenartikel]
Ablation and cutting of carbon-fiber reinforced plastics using picosecond pulsed laser radiation with high average power
In: Journal of laser applications : JLA, 25 (4), 042007-1 (5 S.), 2013
[DOI: 10.2351/1.4807082]

Finger, Johannes-Thomas
Weinand, Marco
Wortmann, Dirk

[Fachzeitschriftenartikel]
Fast freeform processing
In: Mikroniek, 53 (3), 48-50, 2013

Heidrich, Sebastian

[Buchbeitrag, Beitrag zu einem Tagungsband]
Fluorescence sensors for parallel measurements in multichannel microfluidic devices covering the full channel cross sections
In: Microfluidics, bioMEMS, and medical microsystems XI : 3 - 5 February 2013, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored by SPIE. Cosponsored by Microfluidic ChipShop GmbH (Germany) ... Supported by Fraunhofer Institute for Photonic Microsystems (Germany). Holger Becker ..., ed., 8615 1C, 2013
[DOI: 10.1117/12.2004207]

Meineke, Georg
Flitsch, David
Lenenbach, Achim
Noll, Reinhard

[Buchbeitrag, Beitrag zu einem Tagungsband]
Analysis of single-mode efficiency of electrically pumped VECSELs
In: Vertical external cavity surface emitting lasers (VECSELs) III : 3 - 5 Ferbruary 2013, San Francisco, California, United States ; [part of SPIE Photonics West] / sponsored and publ. by SPIE. Jennifer E. Hastie, ed., 86060H, 2013
[DOI: 10.1117/12.2002045]

Schwarz, Thomas
Berens, Michael
Gronenborn, Stephan
Kolb, Johanna
Loosen, Peter
et al.

[Fachzeitschriftenartikel]
Numerical analysis of laser ablation and damage in glass with multiple picosecond laser pulses
In: Optics express, 21 (7), 7858-7867, 2013
[DOI: 10.1364/OE.21.007858]

Sun, Mingying
Eppelt, Urs
Russ, Simone
Hartmann, Claudia
Siebert, Christof
et al.

[Fachzeitschriftenartikel]
Large-mode enhancement cavities
In: Optics express, 21 (9), 11606-11617, 2013
[DOI: 10.1364/OE.21.011606]

Carstens, Henning
Holzberger, Simon
Kaster, Jan
Weitenberg, Johannes
Pervak, Volodymyr
et al.

[Fachzeitschriftenartikel]
Surface enhanced infrared spectroscopy with gold strip gratings
In: Optics express, 21 (7), 9005-9010, 2013
[DOI: 10.1364/OE.21.009005]

Wang, Tao
Nguyen, Vu Hoa
Buchenauer, Andreas
Schnakenberg, Uwe
Taubner, Thomas

[Fachzeitschriftenartikel]
Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
In: Optics & laser technology, 54, 98-109, 2013
[DOI: 10.1016/j.optlastec.2013.05.011]

Hong, Chen
Gu, Dongdong
Dai, Donghua
Gasser, Andres
Weisheit, Andreas
et al.

[Doktorarbeit]
Increased liver stiffness denotes hepatic dysfunction and mortality risk in critically ill noncirrhotic patients at a medical ICU, 15 S. : Ill., graph. Darst., 2013

Horn, Andreas

[Abstract, Beitrag zu einem Tagungsband]
Innovative fiber based drug delivery system
In: Euro BioMAT : European Symposium and Exhibition on Biomaterials and Related Areas, 23 - 24 April 2013, Weimar, Germany, 2013

Fehér, Katalin
Kleinsteinberg, Kathrin
Leonards, Holger
Bremus-Köbberling, Elke Auguste
Schmitz, Dominik
et al.

[Fachzeitschriftenartikel]
Microcutting and Hollow 3D Microstructures in Glasses by In-volume Selective Laser-induced Etching (ISLE)
In: Journal of laser micro/nanoengineering, 8 (1), 15-18, 2013
[DOI: 10.2961/jlmn.2013.01.0004]

Gottmann, Jens
Hermans, Martin
Ortmann, Jürgen

[Buchbeitrag, Beitrag zu einem Tagungsband]
Imaging with plasma based extreme ultraviolet sources
In: Short-wavelength imaging and spectroscopy sources : 10 - 11 September 2012, Bern, Switzerland / organized by David Bleiner, Institute for Applied Physics, University of Bern (Switzerland), 8678 0F, 2013
[DOI: 10.1117/12.2011139]

Juschkin, Larissa

[Fachzeitschriftenartikel]
Development and characterization of a coronary polylactic acid stent prototype generated by selective laser melting
In: Journal of materials science / Materials in medicine, 24 (1), 241-255, 2012
[DOI: 10.1007/s10856-012-4779-z]

Flege, Christian
Vogt, Felix
Höges, Simon
Jauer, Lucas
Borinski, Mauricio Armando
et al.

[Fachzeitschriftenartikel]
Der Laser verbindet Kunststoffe mit metallischen Bauteilen
In: Maschinenmarkt : MM, 2013 (18), 36-38, 2013

Rösner, Andreas

[Fachzeitschriftenartikel]
Energie- und ressourceneffiziente Funktionalisierung temperaturempfindlicher Substrate
In: Laser-Magazin, 2013 (2), 8-9, 2013

Stollenwerk, Jochen Hugo

[Buchbeitrag, Beitrag zu einem Tagungsband]
Low-loss, smile-insensitive external frequency-stabilization of high power diode lasers enabled by vertical designs with extremely low divergence angle and high efficiency
In: High-Power Diode Laser Technology and Applications XI : San Francisco, California, USA ; February 02, 2013 / Ed.: Mark S. Zediker, 0T-1--13, 2013
[DOI: 10.1117/12.2000528]

Crump, Paul
Knigge, Steffen
Maaßdorf, André
Bugge, Frank
Hengesbach, Stefan
et al.

[Fachzeitschriftenartikel]
High resolution irradiance tailoring using multiple freeform surfaces
In: Optics express, 21 (9), 10563-10571, 2013
[DOI: 10.1364/OE.21.010563]

Bruneton, Adrien
Bäuerle, Axel
Wester, Rolf
Stollenwerk, Jochen Hugo
Loosen, Peter

[Buchbeitrag, Beitrag zu einem Tagungsband]
High speed micro scanner for 3D in-volume laser micro-processing
In: Laser-based micro- and nanopackaging and assemby VII : 6 - 7 February 2013, San Francisco, California, United States ; [LBMP VII ... part of LASE 2013 at Photonics West] / sponsored and publ. by SPIE. Udo Klotzbach ..., ed., 8608 08, 6 S., 2013
[DOI: 10.1117/12.2008205]

Schäfer, Dagmar
Gottmann, Jens
Hermans, Martin
Ortmann, Jürgen
Kelbassa, Ingomar

[Buchbeitrag, Beitrag zu einem Tagungsband]
Fundamental processes of refractive index modifications during femtosecond laser waveguide writing
In: Advanced fabrication technologies for micro/nano optics and photonics VI : 5 - 6 February 2013, San Francisco, California, United States ; [part of SPIE photonics west] / sponsored by SPIE. Georg von Freymann ..., ed., 86130X, 7 S., 2013
[DOI: 10.1117/12.2004279]

Schäfer, Dagmar
Schnitzler, Daniel
Kelbassa, Ingomar

[Beitrag zu einem Tagungsband]
Generation of coherent sub-20 nm XUV radiation at 78 MHz via cavity-based HHG
In: XVIIIth International Conference on Ultrafast Phenomena.Lausanne, Switzerland, July 8-13, 2012. M. Chergui, A. Taylor, S. Cundiff, R. de Vivie-Riedle and K. Yamagouchi(Eds.), 10023 (3 S.), 2013
[DOI: 10.1051/epjconf/20134110023]

Pupeza, Ioachim
Holzberger, Simon
Eidam, Tino
Esser, Dominik
Weitenberg, Johannes
et al.

[Fachzeitschriftenartikel]
Gut gerüstet für langen Einsatz
In: Form + Werkzeug, 2013 (1), 25-27, 2013

Maischner, Dora
Barz, Jürgen
Weisheit, Andreas
Backes, Gerhard

[Fachzeitschriftenartikel]
Laser welding of polymers
In: Industrial laser solutions for manufacturing, 28 (1), 29-31, 2013

Rösner, Andreas
Olowinsky, Alexander

[Fachzeitschriftenartikel]
Diffraction-assisted extreme ultraviolet proximity lithography for fabrication of nanophotonic arrays
In: Journal of vacuum science & technology : JVST / B, 31 (2), 021602, 2013
[DOI: 10.1116/1.4789445]

Danylyuk, Serhiy
Kim, Hyun-su
Brose, Sascha
Dittberner, Carsten
Loosen, Peter
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
LACAM3D, CAM solution for tool path generation for build up of complex aerospace components by laser powder deposition
In: Proceedings of the 37th International MATADOR Conference - University of Manchester/July 2012 / Srichand, Hinduja and Lin, Li, 61-64, 2013

Flemmer, John
Pirch, Norbert
Witzel, Johannes
Gasser, Andres
Wissenbach, Konrad
et al.

[Buchbeitrag, Beitrag zu einem Tagungsband]
High speed LAM
In: Proceedings of the 37th International MATADOR Conference - University of Manchester/July 2012 / Srichand, Hinduja and Lin, Li, 5 S., 2013

Kelbassa, Ingomar
Gasser, Andres
Meiners, Wilhelm
Backes, Gerhard
Müller, Bernd

[Buchbeitrag, Beitrag zu einem Tagungsband]
Modeling of coaxial single and overlap-pass cladding with laser radiation
In: Proceedings of the 37th International MATADOR Conference - University of Manchester/July 2012 / Srichand, Hinduja and Lin, Li, 377-380, 2013

Pirch, Norbert
Keutgen, Stefanie
Gasser, Andres
Wissenbach, Konrad
Kelbassa, Ingomar

[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Laser transmission bonding of silicon to silicon with metallic interlayers for wafer-level packaging
In: Microsystem technologies, 19 (5), 669-673, 2012
[DOI: 10.1007/s00542-012-1636-4]

Wissinger, Ansgar
Olowinsky, Alexander
Gillner, Arnold
Poprawe, Reinhart

[Doktorarbeit]
Laserstrukturierung transparenter, elektrisch leitfähiger Schichten für die organische Elektronik, II, 165 S. : Ill., graph. Darst., 2013

Schaefer, Moritz Adrian

[Doktorarbeit]
Additive manufacturing of high performance oxide ceramics via selective laser melting, VII, 241 S. : Ill., graph. Darst., 2013

Hagedorn, Yves-Christian

[Doktorarbeit]
Funktionalisierung von Bauteiloberflächen durch Mikro-Laserauftragschweißen, II, 157 S. : Ill., graph. Darst., 2013

Jambor, Torsten

[Doktorarbeit]
Lokale Wärmebehandlung mit Laserstrahlung zur Verbesserung der Umform- und Funktionseigenschaften von hochfesten Stählen, Getr. Zählung : Ill., graph. Darst., 2013

Bergweiler, Georg

[Doktorarbeit]
Synchrone Qualitäts- und Produktivitätssteigerung beim Laserstrahlbohren, 110 S. : Ill., graph. Darst., 2013

Dietrich, Jens

[Doktorarbeit]
Kompakte, grün emittierende Laser auf Basis von Pr:YLF, 145 S. : Ill., graph. Darst., 2013

Strotkamp, Michael

[Buchbeitrag]
Shortening Process Chains for the Production of Plastic/Metal Hybrids Using Innovative Primary Forming and Joining Processes
In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, Chapter 5, Hybrid production systems, 480-550, 2012

Bobzin, Kirsten
Bührig-Polaczek, Andreas
Haberstroh, E.
Michaeli, W.
Poprawe, R.
et al.

[Fachzeitschriftenartikel]
Selective Laser Melting : a Manufacturing Technology for the Future?
In: Laser-Technik-Journal, 9 (2), 33-38, 2012
[DOI: 10.1002/latj.201290018]

Bremen, Sebastian
Meiners, Wilhelm
Diatlov, Andrei

[Fachzeitschriftenartikel]
Generativer Fertigungsverfahren : Potenzial für die „grüne Produktion“
In: Werkstoffe in der Fertigung, 2012 (6), 2012

Merkt, Simon

[Beitrag zu einem Tagungsband]
Build Up Increase with High Power SLM
In: [Materialise World Conference 2012 : 18.-20. April 2012, Leuven, Belgien], 2012

Bremen, Sebastian

[Beitrag zu einem Tagungsband]
Digital Photonic Production : Stand und Perspektiven der individualisierten Produktion mittels Lasertechnik
In: [Kongress Photonische Prozessketten : Die Revolution in der Produktion? ; 28. und 29. November 2012, EuroMold in Frankfurt], 2012

Poprawe, Reinhart

[Beitrag zu einem Tagungsband]
Individualisierung und Komplexität zum Nulltarif : neue Horizonte für die Produktion von morgen durch Selective Laser Melting
In: Kongress Photonische Prozessketten : die Revolution in der Produktion? ; 28. und 29. November 2012, EuroMold in Frankfurt, 2012

Meiners, W.

[Fachzeitschriftenartikel]
Technology roadmapping for the production in high-wage countries
In: Production engineering, 5 (4), 463-473, 2012
[DOI: 10.1007/s11740-011-0324-z]

Schuh, Günther
Aghassi, Susanne
Orilski, Simon
Schubert, Johannes
Bambach, Markus
et al.

[Beitrag zu einem Tagungsband]
Was macht den Traumjob Wissenschaft aus? : Ergebnisse des World Cafés auf der 6. GEW-Wissenschaftskonferenz 2012 in Herrsching
In: Baustelle Hochschule : attraktive Karrierewege und Beschäftigungsbedingungen gestalten / Andreas Keller ... Hg., 169-174, 2012

Heinze, Ute
Jooß, Claudia
Borowski, Esther
Pöschl, Doreen
Schütz, Anna
et al.

[Fachzeitschriftenartikel]
Quo vadis, laser additive manufacturing?
In: Journal of laser applications : JLA, 24 (5), 2012
[DOI: 10.2351/1.4745081]

Kelbassa, Ingomar
Wohlers, Terry
Caffrey, Tim

[Buchbeitrag]
Individualised Production
In: Integrative Production Technology for High-Wage Countries / edited by Christian Brecher, 77-239, 2012
[DOI: 10.1007/978-3-642-21067-9_3]

Schuh, Günther
Behr, Marek
Brecher, Christian
Bührig-Polaczek, Andreas
Michaeli, Walter
et al.

[Beitrag zu einem Tagungsband]
Irradiance tailoring for extended sources using a point-source freeform design algorithms
In: Optical Systems Design 2012, Barcelona, Spain, November 26, 2012, 85502S, 8 S., 2012
[DOI: 10.1117/12.981755]

Wester, Rolf
Bruneton, Adrien
Bäuerle, Axel
Stollenwerk, Jochen Hugo
Loosen, Peter

[Beitrag zu einem Tagungsband]
High power diode lasers and their applications: Recent developments and future trends
In: Laser and Tera-Hertz Science and Technology (LTST) : 01 November - 02 November 2012, Wuhan, China / Optical Society of America, 2 S., 2012
[DOI: 10.1364/LTST.2012.MF1A.4]

Traub, Martin
Hengesbach, Stefan
Hoffmann, Dieter

[Fachzeitschriftenartikel]
Broadband Subwavelength Imaging Using a Tunable Graphene-Lens
In: ACS nano, 6 (11), 10107-10114, 2012
[DOI: 10.1021/nn303845a]

Li, Peining
Taubner, Thomas

[Beitrag zu einem Tagungsband]
Laserinduzierte Wirkstofffreisetzung aus textilen Implantaten
In: 4. Dresdner Medizintechnik-Symposium : Innovationen in Medizintechnik und medizinischer Mess- und Sensortechnik ; 3. bis 5. Dezember 2012, Dresden / Jens Füssel ; Edmund Koch ; Hagen Malberg ; Winfried Vonau (Hg.), 29-36, 2012

Fehér, Katalin
Leonards, Holger
Bremus-Köbberling, Elke Auguste
Schmitz, Dominik
Pich, Andrij
et al.

[Beitrag zu einem Tagungsband]
Laser-beam helical drilling of high quality micro holes
In: Congress proceedings / ICALEO, 31th International Congress on Applications of Lasers & Electro-Optics : September 23 - 27, 2012, Anaheim Marriot Hotel, Anaheim, California, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair: Kunihiko Washio, 10 S., 2012

Fornaroli, Christian
Holtkamp, Jens
Gillner, Arnold

[Fachzeitschriftenartikel]
Extrusion embossing of hydrophobic films - a study on process characteristics and surface properties
In: Zeitschrift Kunststofftechnik = Journal of plastics technology, 8 (3), 302-330, 2012

Hopmann, Christian
Michaeli, Walter
Eilbracht, Stephan
Bobzin, Kirsten
Bagcivan, Nazlim
et al.

[Buchbeitrag, Fachzeitschriftenartikel]
Experimental and theoretical investigation on fs-laser-induced nanostructure formation on thin gold films
In: Journal of laser applications : JLA, 24 (4), 042017, 2012
[DOI: 10.2351/1.4734048]

Wortmann, Dirk
Koch, Jürgen
Reininghaus, Martin
Unger, Claudia
Hulverscheidt, Conny
et al.

[Beitrag zu einem Tagungsband]
Laser ablation mechanism of transparent dielectrics with picosecond laser pulses
In: Laser-Induced Damage in Optical Materials 2012 : 44th Annual Laser Damage Symposium proceedings ; Boulder, Colorado, USA, September 23, 2012 / Ed.: G. J. Exarhos [u.a.], 9 S., 2012
[DOI: 10.1117/12.976062]

Sun, Mingying
Eppelt, Urs
Russ, Simone
Hartmann, Claudia
Siebert, Christof
et al.

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Gradients for cell guidance – functionalization by UV-laser-irradiation
In: Journal of tissue engineering and regenerative medicine, 6 (Suppl. 1), 61.P28, 373-374, 2012

Seiler, Nadine
Bremus-Köbberling, Elke Auguste
Leonhäuser, Dorothea
Gillner, Arnold

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
What you see is what you print : Single cell transfer
In: Journal of tissue engineering and regenerative medicine, 6 (Suppl. 1), 61.P30, 374-374, 2012

Riester, Dominik
Özmert, Alp
Ungers, Michael
Wehner, Martin

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Spatially selective modification of polymeric scaffolds with markers for MR-Imaging
In: Journal of tissue engineering and regenerative medicine, 6 (Suppl. 1), 52.P02, 316-316, 2012

Bremus-Köbberling, Elke Auguste
Leonards, Holger
Naderi, Malek

[Fachzeitschriftenartikel]
Apodized holographic beam combiners for dense wavelength multiplexing based on Gaussian-beam interference
In: Optics & laser technology, 37 (24), 5205-5207, 2012
[DOI: 10.1364/OL.37.005205]

Nippgen, Sebastian
Hengesbach, Stefan
Traub, Martin
Hoffmann, Dieter

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Light triggered drug release
In: Journal of tissue engineering and regenerative medicine, 6 (Suppl. 1), 54.P07, 324-324, 2012

Leonards, Holger
Schmitz, D.
Pich, A.
Bremus-Köbberling, Elke Auguste

[Beitrag zu einem Tagungsband]
Irradiance tailoring with two-sided, Fresnel-type freeform optics
In: Nonimaging Optics : Efficient Design for Illumination and Solar Concentration IX San Diego, California, USA, August 12, 2012, 1-7, 2012
[DOI: 10.1117/12.929801]

Bruneton, Adrien
Bäuerle, Axel
Traub, Martin
Wester, Rolf
Loosen, Peter

[Abstract, Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Method for the fabrication of macroscopic high resolution scaffolds by the combination of inkjet-printing and laser initiated polymerization
In: Journal of tissue engineering and regenerative medicine, 6 (Suppl. 1), 50.P20, 299-300, 2012

Engelhardt, Sascha
Refle, O.
Wehner, Martin

[Buchbeitrag]
Optical measurements for the rational screening of protein crystallization conditions
In: Handbook of biophotonics / ed. by Jürgen Popp, Valery V. Tuchin, Arthur Chiou, and Stefan H. Heinemann. - Vol. 3: Photonics in pharmaceutics, bioanalysis and environmental research, 257-287, 2012

Janzen, Christoph
Hoffmann, K.

[Buch]
Laser-induced breakdown spectroscopy : fundamentals and applications, XII, 543 S. : Ill., graph. Darst., 2012

Noll, Reinhard

[Fachzeitschriftenartikel]
Investigation of wear and corrosion protection of AlSi20 coatings produced by thermal spraying and laser cladding on AZ31B
In: Journal of thermal spray technology : JTST, 22 (2/3), 207-212, 2012
[DOI: 10.1007/s11666-012-9867-6]

Bobzin, Kirsten
Kopp, Nils
Warda, Thomas
Schulz, Christiane
Rolink, Gesa
et al.

[Beitrag zu einem Tagungsband]
High power Selective Laser Melting - further steps towards series production
In: Additive Manufacturing & 3D printing : international conference ; Tue 10th July & Wed 11th July 2012, The Nottingham Belfry, Nottingham, 2012

Bremen, Sebastian
Schrage, Johannes
Meiners, Wilhelm
Wissenbach, Konrad

[Beitrag zu einem Tagungsband]
Selective Laser Melting - a manufacturing method for series production
In: DDMC 2012 : First Direct Digital Manufacturing Fraunhofer Conference 2012 ; March 15-16, 2012 / Ed.: Axel Demmer, 6 S., 2012

Bremen, Sebastian
Buchbinder, Damien
Meiners, Wilhelm
Wissenbach, Konrad

[Abstract, Beitrag zu einem Tagungsband]
Ultrafast mid-IR laser source with a tuning range from 9 to 16 microns based on nonlinear frequency conversion
In: mirsens2 : International Workshop on Opportunities and Challenges in Mid-Infrared Laser-Based Gas Sensing ; October 18-20, 2012, Inst. of physics, Wroclaw Univ. of Technology ; book of abstracts, 18-19, 2012

Wüppen, Jochen
Nyga, Sebastian
Taubner, Thomas
Jungbluth, Bernd

[Fachzeitschriftenartikel]
Elektronenschauer im Glas
In: Laser Community, 2012 (2), 24-25, 2012

Eppelt, Urs

[Beitrag zu einem Tagungsband]
Diagnostic and simulation of ps-laser glass cutting
In: Congress proceedings / ICALEO, 31th International Congress on Applications of Lasers & Electro-Optics : September 23 - 27, 2012, Anaheim Marriot Hotel, Anaheim, California, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair: Kunihiko Washio, 10 S., 2012

Eppelt, Urs
Russ, Simone
Hartmann, Claudia
Sun, Mingying
Siebert, Christof
et al.

[Buchbeitrag]
Test Case Gearing Component
In: Integrative computational materials engineering : concepts and applications of a modular simulation platform / ed. by Georg J. Schmitz and Ulrich Prahl, 187-218, 2012
[DOI: 10.1002/9783527646098.ch9]

Konovalov, Sergey
Henke, Thomas
Jansen, Ulrich
Hardjosuwito, Ario Frederik
Lohse, Wolfram
et al.

[Buchbeitrag]
Direct laser cladding, current status and future scope of application
In: Laser-Assisted Fabrication of Materials / Majumdar, Jyotsna Dutta (Hrsg.); Manna, Indranil (Hrsg.)., 221-239, 2012

Weisheit, Andreas
Gasser, Andres
Backes, Gerhard
Jambor, Torsten
Pirch, Norbert
et al.

[Beitrag zu einem Tagungsband]
Technology-adapted product design methods for laser based Additive Manufacturing
In: DDMC 2012 : First Direct Digital Manufacturing Fraunhofer Conference 2012 ; March 15-16, 2012 / Ed.: Axel Demmer, 5 S., 2012

Merkt, Simon
Hinke, Christian
Gradl, Philipp

[Beitrag zu einem Tagungsband]
Digital photonic production of micro structures in glass by in-volume selective laser-induced etching using a high speed micro scanner
In: Laser Assisted Net shape Engineering 7 (LANE 2012) / ed. by M. Schmidt, F. Vollertsen and M. Geiger, 534-541, 2012
[DOI: 10.1016/j.phpro.2012.10.070]

Gottmann, Jens
Hermans, Martin
Ortmann, Jürgen

[Beitrag zu einem Tagungsband]
Production of silver conductive paths by laser processing
In: Congress proceedings / ICALEO, 31th International Congress on Applications of Lasers & Electro-Optics : September 23 - 27, 2012, Anaheim Marriot Hotel, Anaheim, California, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair: Kunihiko Washio, 5 S., 2012

Meixner, Melanie
Stollenwerk, Jochen Hugo
Wissenbach, Konrad

[Fachzeitschriftenartikel]
Geometric complexity analysis in an Integrative Technology Evaluation Model (ITEM) for Selective Laser Melting (SLM)
In: South African Journal of Industrial Engineering, 23 (2), 97-105, 2012

Merkt, Simon
Hinke, Christian
Schleifenbaum, Henrich
Voswinckel, Holger

[Fachzeitschriftenartikel]
Selective laser etching of sapphire & glasses
In: Industrial laser solutions for manufacturing, 27 (2), 8-13, 2012

Gottmann, Jens
Hermans, Martin
Hörstmann-Jungemann, Maren
Schäfer, Dagmar

[Abstract, Beitrag zu einem Tagungsband]
Sub-25 nm high-harmonic generation with a 78-MHz repitition rate enhancement cavity
In: Quantum Electronics and Laser Science Conference (QELS 2012) : San Jose, California May 6, 2012, 2-2, 2012

Holzberger, Simon
Pupeza, Ioachim
Esser, Dominik
Weitenberg, Johannes
Carstens, Henning
et al.

[Beitrag zu einem Tagungsband]
Some answers to frequently asked questions and open issues of laser beam cutting
In: Congress proceedings / ICALEO, 31th International Congress on Applications of Lasers & Electro-Optics : September 23 - 27, 2012, Anaheim Marriot Hotel, Anaheim, California, USA ; [including] Laser Materials Processing Conference, Laser Microprocessing Conference, Nanomanufacturing Conference / presented by: LIA, Laser Institute of America. Congress general chair: Kunihiko Washio, 6 S., 2012

Petring, Dirk
Schneider, Frank
Wolf, Norbert

[Beitrag zu einem Tagungsband]
Single mode all-fiber pulse-pumped Raman amplifier for picosecond pulses
In: Advanced solid-state photonics, ASSP : San Diego, 29 January - 1 February 2012 ; [technical conference] / Optical Society of America, 3 S., 2012

Katzy, Veronika
Giesberts, Martin
Fitzau, Oliver
Hoffmann, Dieter

[Abstract, Konferenzbeitrag, Beitrag zu einem Tagungsband]
Cutting with 1 micron wavelength lasers: An intermediate assessment of speculations, simulations, diagnostics and facts
In: Facts and trends in industrial lasers and applications : Stuttgart Laser Technology Forum '12, SLT '12 ; June 13 - 14, 2012 / IFSW. Publ.: Thomas Graf ..., 23 Folien, 2012

Petring, Dirk

[Fachzeitschriftenartikel]
Elemental monitoring of steel scrap loading an electrical arc furnace
In: Yejin-fenxi : shuangyuekan = Metallurgical analysis, 32 (6), 8-23, 2012